Resume - Production/drilling engineer hold Master from IFP; working in Workover operation

Misco Jobs

Resume #85527

CONTACT INFORMATION:
View contact information...

EDUCATION
Masters in Petroleum Engineering; ENSPM-IFP, France 2002
Bachelor Degree in Petroleum Engineering; IAP, Algeria 1997

KEY QUALIFICATIONS
Production engineer having over 8 years of experience with national and international oil companies. Extensive experience in workovers and completions, using both snubbing units (HRL 120; HRS 150; BHS 235; and workover rigs. Specific skills include rig management, project scheduling, and equipment and service tendering. Demonstrated self starter with high respect for HSE policy; implementing Management safety system and rigorous inspection for Snubbing unit; resulting on 6 years LTI free still going.

EXPERIENCE
SWDOS (Specialized Workover Drilling Oil Services) Libya 2009-present
Rig Manager ; working on SOP and met the clients for further co-operation; installing and maintaining QHSE

SONAHESS (Joint Venture Sonatrach – HESS) 2003-2008

Senior Workover/Snubbing/Production Engineer – GEA Fields, Algeria (Oct'05 – present)
Desert office based 4/4 engineering position responsible for managing day to day operations of a short stroke 235 Snubbing Unit undertaking development activities within the El Gassi, Zotti, and Agreb (GEA) fields (60,000 bopd production). Joint Venture between Sonatrach and HESS.
* Workover programming and equipment procurement for continuous operation of a snubbing unit undertaking tubing changeouts, wellbore cleanouts, fishing, and running ESP's.
* Supervision of rig supervisors and crew of snubbing unit. Relief field supervision as needed.
* Implemented a management safety system for Snubbing unit. HSE for hydraulic workover unit 4years LTI free and still ongoing.
* Management of bonus system for rig crew.
* Inventory management using Maximo. Cost control and reporting.
* Programming and downloading of Metrolog downhole pressure gauges for well surveillance, using Metrowin, and preparations of reports.

Workover Supervisor – GEA Fields, Algeria (May'05 – Oct'05)
Field based 4/4 rig supervision position. Night man for ENAFOR 05, a 1400 HP rig with crew of 100 personnel undertaking workovers, sidetracks, and horizontal wells within the GEA fields.
* Pulling and retrieving 3.1/2" and 4.1/2" completions.
* Milling and fishing packers.
* Sidetracking and drilling horizontal 6" and 4.1/8" lateral sections up to 1000m.
* Running and cementing liners.
* Running new completions.
* Wellhead and Christmas tree installations and testing.

Senior Snubbing Supervisor – GEA Fields, Algeria (Mar'03 – May'05)
Senior Company Man on BHS 235, a short stroke hydraulic workover and snubbing unit working within the GEA field.
On-site supervision of the following:
* Fishing 1.315" and 1.66" concentric tubing and plugs for gas lift and wash water, and of snubbing/running of these into wells.
* Cleanout of vertical and horizontal wells.
* Running of pre-perforated liners for sand control.
* Running of 2" fibreglass concentric tubing for chemical injection.
* Wellhead change-outs.
* Christmas tree and annulus testing.
Key achievements:
* 1400days without LTI, still ongoing.
* Introduction of a rigorous and detailed inspection regime.
* Improved pipe tripping from 15jts/hr to 35jts/hr.

SONATRACH 2002-2003

Workover Engineer – Hassi R'Mel Field, Algeria (Jan'02 – Feb'03)
Office based 4/4 position for high pressure gas field making 9000 MMSCFD.
* Preparation of completion programs.
* Preparation of the equipment and tools needed for running completions.

PROFESSIONAL COURSES

HSE:
* IOSH training (2007)
* Behavioral safety auditing / coaching course (2007)
* First Aid Training - Besset, El Gassi (Algeria), Expired (2007)
* Fire Extinguisher User, Onsite Training Service (2005)
* Manual Handling, Onsite Training Service (2004)
* Safe Driver Assessment, Onsite Training Service (2007)

Technical:
* IWCF Well Intervention School; level two, HMD (Algeria)
* IWCF Drilling Supervisor Certificate School, HMD (Algeria) Expired on 07/Jun/07
* Directional, Horizontal, and Multilateral Drilling, PetroSkills, Dubai (UAE) (2005)
* Wellheads Training, IHRDC, EL GASSI Algeria (2005)
* Technical English Language-Advanced Level, IHRDC, EL GASSI Algeria (2004)
* Pressure Transient Analysis, KAPPA, Saphir Software, El GASSI (2006)

PERSONAL DATA
* Nationality & Passport: Algerian
* D.O.B: December 11th, 1973
* Marital Status: Married with 2 children
* Languages: English, French, and Arabic
* Computer Skills: Microsoft office suite, Saphir, Metrolog, Maximo
* References: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 7051)

Go to Search Parameters...

Brief Description

Under Ground Piping Specialist

Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.

A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.

Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering

Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.

APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT

I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance

Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer

I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis

28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.

Electrical Technician with 20 years experience in the oil and gas industry.

A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

Application For Mechanical Inspector/Engineer

B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.

To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Highly Qualified Draughtsman

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

M.Sc with 15 years Laboratory experience in Analytical Lab.

Electrical Engineer

Piping Engineer (PDMS)

PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman

I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory

Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)

Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.

Piping design and checking:Cadworx, Bentley 3D, Autoplant

Piping Designer - Mechanical / Piping.

G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

20+ years in offshore engineering; including marine, structural, pipeline, and project engineering

About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.

Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis

Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc

Senior Rotating Engineer

A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.

I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT

I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys

Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.

Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.

PhD Petroleum Engineer (Production Technologist)

M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.

Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out