Resume - Senior Completions engineer with excellent welltesting skills.

Misco Jobs

Resume #85567

CONTACT INFORMATION:
View contact information...

Summary
I have worked in the Oilfield since 1987. Where by I have gained valuable experience, in all aspects of completions and well service applications.

Working strengths summarized
 Engineering/Design/planning for all aspects of completion operations.
 Experience of HAZOPS, HAZID and SIMOPS processes.
 Working on Semi Submersibles/ Jack-ups/Swap barges/ Land Rigs/Platforms
 Proactive, highly focused and self motivated
 Planning and scheduling multi-component operations.
 Managing multi-disciplined teams, with strong team building and leadership skills.
 Designing and writing operations programs/guidelines for all types of completions and well testing operations

Educational Qualifications: 22 years work experience
Institute Qualification Date
Heriot-Watt University MSc/Diploma Petroleum Engineering Ongoing
Glasgow College of Nautical Studies HND – "Marine Engineering' 1982-1986
Professional History

Tenure: July 2006- Ongoing
Position: Senior Completions/Well Service Engineer
Employer: StatoilHydro and Sonangol P&P
Location: Onshore/offshore Luanda, Angola
Responsibilities:  Senior Completions Engineer for Gimboa Project Block 4/05.
7 wells 4 Injectors and 3 Producers in 740m water. All FEED was done by myself for upper and lower completions.The peer reviews were done by StatoilHydro in Norway. For lower completions this included sand screen selection versus gravel pack, swell packers versus constrictors, FIV evaluations and wash pipe considerations, completion mud was evaluated by SOH but filtration process was designed by myself and worked extremely well. All contingency plans for lower completions were considered and equipment was negotiated on standby rates. We ran the longest SAS in Angola at over 1500m, with swell packers, all the FIV's opened. Operation time on average was 7 days for lower completion and 7 days for upper completion. The upper completions were all designed with minimum intervention and gas lift considerations. No reservoir stimulation was planned for these wells. A special designed shear out sub was made by SLB after further design reviews. We were the first company in Angola to run X-lift gas lift system from SLB in Angola. I evaluated all bids, considering commercial, technical and Angolan content. I conducted all CWOP for each well and all performance reviews of each individual service company.
During the course of these 7 wells we also had the opportunity to perform 1 DST which was done with SAS this was to evaluate reservoir and screen performance. The Welltest was designed, written and then supervised offshore by myself. A second DST was planned unfortunately the test was abandoned, but a full DST program for Liner+ Liner hanger with a DST and TCP was prepared, again done by myself.
A well test was planned and prepared by myself for Punja Block 3/05 all equipment and services companies included, unfortunately I had to leave before finishing the job, but the work was carried out as per my test program which included pre-simulation and post-stimulation well tests, the results were good.
 Technical assistance on Blocks 2 and 3. These duties mainly consisted of peer reviews of the work currently being carried out on these blocks. Perforating, Stimulation, well-testing, Liner hangers, upper and lower completion equipment choices and material selection. Intervention work using CT and E-line ( standard and tractor)
 Office based engineering or all the completion services provided.
 Rig site engineering and supervision when required
 Writing procedures and documentation for all completions and welltest operations
 Bid evaluation for the procurement of materials and services Technical And Commercial
 Risk analysis and CWOP for all the activities incurred during completions phase.
 Mentoring local completion, production and reservoir engineers in the best completion practises, Well testing and Intervention.
 Akersolutions Subsea systems.
 Reduced AFE by reducing time taken to perform services.

Tenure: Dec 2004- July 2006
Position: Completions/Well Service Engineer
Employer: ConocoPhillips.
Location: Onshore/offshore, Stavanger Norway.
Responsibilities:  Office based engineering working on completions for the Embla HPHT well. This included in house reviews for the best way to orient perforate considering all market products available at the time. Baker wire-line with Baker orienting guns were chosen. Considerations for flowing while perforating were also considered.
 Completions Engineer for Ekofisk 2/4-X platform. Office based engineering design and procedures for completion. Work-over's and completions.
 Rig site engineering and supervision
 Writing of procedures and documentation for HPHT completion, also Ekofisk work over and completion..
 Bid evaluation and procurement of materials and services
 Risk analysis for all the activities incurred during the completions phase. This includes CWOP and peer reviews with service companies.

Tenure: January 2004- Dec 2004
Position: Completions/Well Service Engineer
Employer: DONG (Danish Oil & Natural Gas)
Location: Onshore/offshore, Denmark
Responsibilities:  2 wells one producer and one injector.
 Office based engineer in charge of the completions for Stine 1 Subsea project the first for DONG. 60m waters depth. Subsea systems ran from a Jack Up.
 Rig site engineer for the supervision of Completions, TCP, Slick line, Well testing, Screen displacement, Liner hangers Coil Tubing, e-line and tractors
 Writing of procedures and documentation for a Sub sea completion performed from a Jack-up.
 Bid evaluation and procurement of materials and services

Tenure: July 2003- January 2004
Position: Well Service Supervisor
Employer: Agip KCO
Location: Onshore/offshore Atyrau, Kazakhstan. In the North Caspian sea with 30% H2S and extreme weather conditions from +40 deg C to –40deg C. In a highly environmentally sensitive area, working to a zero discharge policy
Responsibilities:  2 Explorations DST well test operations and 1 producer completions with welltest clean up including CT, e-line, slickline TCP Liner hangers.
 Rig site supervision of Completions, TCP, Slick line, Well testing, Acid Stimulation, Coil Tubing
 Writing of procedures and documentation

Tenure: March 2003- May 2003
Position: DST/Well test Supervisor
Employer: KNOC Korean National Oil Cooperation
Location: Offshore Korea. "Doo-sung" Semi, 180m Water Depth
Responsibilities: 1 offshore DST with welltest operations. Gas test.
 Supervisor in Charge, implementing correct procedures for DST, Well test, TCP, Sub sea, and Slick line operations during the well test program. (Gas field)

Tenure: November 2002-January 2003
Position: Completions Engineer
Employer: Europa Oil and Gas
Location: Onshore UK, BDF rig 28
Responsibilities: 1 producer well complete with well test clean up and CT operations. Was completed ready for artificial lift.
 In charge of design, procedural documentation, procurement of completion equipment.
 Rig site supervision. (Liner Hangers, Slick line, Completion Equipment, Coil tubing Wellheads.)

Tenure: August 2001 – November 2002
Position: Completions Engineer
Employer: Angola Drilling Company, Luanda, Angola. Project Management for Sonangol P&P
Location: Onshore / Offshore Angola, W. Africa.
Semi submersible Hakuru V, 60m water depth
Responsibilities: 8 generic wells which were all initially producers and then 4 turned into Injectors. All cased hole liners as lower completion. Standard upper completion with TCP through packers. All included surface welltest clean up and Acid stimulations.
 Part of a project management team working for Sonangol P & P, developing offshore oilfields in fractured carbonates by drilling and completing hybrid gas lift/injection wells for subsea hook-up to an FPSO.
 In conjunction with the Subsea Superintendent designed and implemented completion procedures and programmes. Especially with regards to Horizontal tree applications
 Responsible for all services associated with completions.
 Reviewed sales and services from service companies
 Reduced operation time with modified procedures
 Rig site supervision of Completions, TCP, Slick line, Well test, Acid Stimulation, Sentree7

Tenure: February 2001 – August 2001
Position: Operations Manager – Cameroon, West Africa.
Employer: Baker Oil tools International
Location: Onshore Douala, Cameroon, W. Africa.
Responsibilities:  Equipment quotations and technical assistance covering all Baker products for TFE, Shell, Nomeco, Phillips, Exxon-Mobile.
 Managed 20 local staff and all Expats that came to assist operations
 Provided logistic assistance for Malabo, Equatorial Guinea
 Implemented training and safety programmes for local employees
 Secured work for Baker even when the base was being closed

Tenure: September 1996 to February 2001
Position: Completion Coordinator for Chevron Texaco
Employer: Baker Oil Tools International
Location: Warri/Port Harcourt and Escravos Nigeria. West Africa
Working on Swamp Barges and Offshore Jack ups
Responsibilities:  Design, coordinate, service and install all Baker downhole equipment for Chevron in Escravos. Averaging 50 wells per year
 Senior completions engineer in Warri completing wells for Texaco, Chevron Mobile and Elf.
 Relief Manager in Warri. Local staff of 80 plus 5 Expats.

Tenure: October 1995 to September 1996
Position: Drill Stem Test Supervisor
Employer: Geoservices International
Location: Sonkla Thailand. Singapore.
Working on Land rigs, Semis and drill ships
Responsibilities:  Using Ex Baker DST tools for offshore work. Various conditions. HP/HT. H2S C02

Tenure: October 1994 to October 1995
Position: Completion Engineer
Employer: Baker Hughes Inteq.
Location: Aberdeen, Scotland UK
Offshore Semi submersibles. Water depths up to 3000feet
Responsibilities:  Offshore running TCP/DST Gravel packs.
 Redress and service all tool using the correct QA/QC procedures

Tenure: January 1994 to October 1994
Position: Drill Stem Test Supervisor
Employer: Geoservices International
Location: Maturin Venezuela. Bogotá Colombia
Working on Land rigs, Semis and drill ships
Responsibilities:  Using Ex Baker DST tools for Onshore and offshore work. Various conditions. HP/HT. H2S C02

Tenure: June 1993 to January 1994
Position: Drill Stem Test Engineer
Employer: EXPRO International
Location: UK, Vietnam and Thailand
Offshore on Semi Submersibles and Drill ships
Responsibilities:  Help develop test and run DST tools for Expro in the various countries above
 Assisted in Subsea operations. Offshore and offshore.
 Assisted in Welltest operations offshore.

Tenure: December 1987 to March 1992
Position: Drill Stem Test and Tubing conveyed Perforation engineer.
Employer: Schlumberger International
Location: Desert, Libya. Aberdeen, Scotland
Land rigs. Offshore Semi Submersibles
Responsibilities:  DST and TCP specialist. Performing Open Hole and cased hole DST's. onshore and offshore applications
 Hydrological testing at Nuclear plant at Sellafield, UK

Tenure: July 1984 to June 1997
Position: 4th Engineer
Employer: Scottish Ship Management and Wallems Ship Management
Location: World wide deep sea.
Responsibilities:  Started with SSM as engineering cadet and received my HND in Marine engineering.
 Working on BP tankers and was promoted from junior engineer to 4th engineer. Repairing and maintaining all equipment on Motor and Steam ships

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 7041)

Go to Search Parameters...

Brief Description

I worked in Aker Shipyards Braila in Hull Design Department as ship designer. I was involved in several projects on making of hull structure drawings, workshop drawings, lines faring for different types of maritime vessels built in shipyards: cargo vessels, supply vessels, RO-RO, container vessels,

Free! 20 years experience in Control Systems design and drafting. Industries include: Refining, Petrochemicals, Pharmaceuticals, and Brewery. Working knowledge of AutoCad MicroStation, Microsoft Excel & Access, PDS modeling, SmartPlant P&ID, SmartPlant Instrumentation (INtools) and SmartPlant 3D.

Hungarian chief rig mechanic with 30 years experience

Twenty-Nine (29) years of experience, working under various international companies in Middle East, Europe and in South East Asia countries.

A diversified and experienced individual seeking opportunity in mechanical engineering / management support or related field.

Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.

development of process flow diagram (PFD) and P&IDs, equipment sizing & preparation of datasheet, heat and material balance, simulation on HYSYS, process improvement, Hazop Reviews, line hydraulics, debottleknecking to improve plant performance, commissioning and pre-commissioning activities.

PLAN SUPERINTENDENT,PLANT MANAGER.SHUTDOWN MANAGER,MAINTENANCESUPRINTENDENT.TECHNICAL CONSULTANT.COMMISSIONG ENGINEER

Diploma In Civil Structural Engineering, Designer, Detail Engineering, FEED,Oil and Gas, EPC, PDMS, PDMS DRAFT, ACAD, Microstation, Review Reality, Terramodel, Windows (MS word, MS Excel & MS PowerPoint) on Windows NT & 2000 Novell environment

Casing Vibration monitoring and spectrum analysis of Rotating equipment by using data collector & analyzer (SKF Microlog CMVA60) and data manager (SKF PRISM4 1.35 / SKF Machine Analyst 2.2)

Process Engineer with 19 years experience on which 12 years of Project Engineering, and Commissioning in international team environment.

Lead the Project in Oil and Gas in different companies namely CB &I, Ajman, Maersk Oil Qatar, Kvaerner Powergas Mumbai, Tecnimont ICB Mumbai etc.

ASNT NDT LEVEL-III +CSWP+ISO LA+RSO

OSHA 30 - WCS Well Control School

Sr. Electrical Designer with AutoCAD background & some Microstation experience.

A result oriented professional with 11 years experience of quality control, Quality inspection Management,NDT-inspection and CAWI-certificate holder

10 years experience in Design, Operation & Commissioning in Well head facilities, Gas gathering and processing, Gas Compression, Gas Dehydration, Gas Sweetening NGL Production, Crude/Condensate Stabilization, Produced Water Systems Water Injection unit ,Hydrotreaters, Hydrogen Generation Units .

In my 31 years of I&E Design experience I have attained many skills. These include • MicroStation V8 • AutoCAD R2007 • SmartPlant Instr V7 • Intools • Intools • Safety Instrumented Sytems

Piping design autocad microstation ceasarII

Working as Sr.Instrument technician with OXY Qatar. Involved with Maintanenace and commissioning on offshore.

Senior Completions engineer with excellent welltesting skills.

Extensive experience in electrical installation, mechanical completion handover, pre-commissioning, commissioning and operation of FPSO, drilling rig & power plants in Africa, Asia, Middle East and South America.

Geoscience consultant for integrated studies, seismic interpretation, reservoir characterization, reservoir geophysics, and interpretive seismic processing.

QHSE + E manager worldwide

Experienced E&P Geologist cum Manager with M.Sc. (Geology) and MBA degrees with over 25 years integrated experience from discovery of new prospect to delineation and evelopment.

Drilling Fluid Engineer having 17 years experience

Thermal Designer Boiler Heaters

I have undertaken the Several Category of Scope & Quantity Verification for Cost Control, Invoice Claim and Change Order Claim to Client. And also, I have undertaken the several Type of Contract ; Fixed Price, Cost Reimbursable and Unit Price.

EDUCATION: B.S., Geology, The Pennsylvania State University, 1985. Experience in exploration, and geophysical well log.

Instrument Engineer with over fifteen years of experience in the Engineering, Construction & Commissioning of Instrumentation and Control Systems for Oil, Gas and Petrochemicals industries. Extensive knowledge and experience in the installation, commissioning, maintenance and trouble shooting of Ins

More than 16 years experience on electrical field

EXPERIENCES IN DESIGN, CONSTRUCTION,REVIEW,QC,PRECOMM AND COMM, COMPLETION ENGINEER

Multi tasking experienced Geologist(MSC.)/ P.Engineer(PhD), looking for positions in geology/ reservoir engineering (even on entry level). I am fluent in many languages, willing to relocate Worldwide, available immediately. Presently living in Canada.

Chemical process engineer with 18 yr's of Up- and downstream Oil & Gas experience

Lead Rotating Equipment Engineer / Lead Packaged Equipment Engineer / Condition Monitoring Senior Specialist

Chief Inspector for Pengrowth Corporation. 17+ years of experience in inspection in NDE, Plant enviroment and field. Certifications include CGSB UT II, MT II, API-510, Studying for National Board exam in December.

valve Inspector,Maintenance Supervisor.Advisor, SME

Experienced Refractory Project Manager / Construction Manager / Consutant

Autocad, Autoplant, Navigator, Navis Explorer, Autoplant Administrator, GTX Rastercad, LFM Modeller/Server, All aspects of Pipe support design, Piping Design Section Leader, Piping codes and standards, MS Access and all windows based software, skilled in all aspects of Piping design & layout.

Twenty-Plus years experience in the design, development, commissioning and maintenance of Process, Batch and Material Handling Control Systems. Experienced in a variety of industries including Petro-Chem, Food, Power Generation, Offshore Production and Land based Drilling.

Boiler Service Manager

Technician in mechanical engineering

With 15 years piping design and construction experience for onshore/offshore facilities, skidded process systems and topsides for clients such as Shell, Petrobras, MODEC, Petronas, BP, Saudi Aramco, Petrokemya, ExxonMobil, Mutineer & Exeter, CNOOC and Qatar Petroleum.

Rotating Equipment Engineeer with 15 yeras of Experience in Oil & Gas Sector

This is Esmaeil Rezaei from Iran and I have 37 Years old. I was graduated form Shiraz University with M.S. degree in chemical engineering. I have 12 years experience in petrochemical company in Shiraz city.

Subject: Application for the Post of Geologist

Experience in commissioning 5MW wartsila diesel engines, underwater mountable Thrusters, marine systems, meeting with owner and class surveyor, technical management of ships, operation and maintenance of marine systems

An Instrument & Electrical Inspector/Supervisor with 15 years of extensive experience in the field of Inspection, Engineering, Construction, Hook-up, Commissioning and Certification of various kinds of Plants such as Petrochemical Plant, Desalination Power Plant, Sewage Water Treatment Plant, Oil &

I am a graduate Mechanical Engineer with over 20 years Oil & Gas Refining industry experience, out of which about 10 years at a AMOCO fuels and lube refinery at India. I am currently working as the Mechanical Design Engineer for a prestigious mega refinery project (world¡¦s largest grassroots refine

senior geologist

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out