Resume - An experienced Control & Instrumentation Engineer with extensive achievements in...

Misco Jobs

Resume #85612

CONTACT INFORMATION:
View contact information...

Professional Summary
An experienced Control & Instrumentation Engineer with extensive achievements in leading, designing, executing, and organizing project activities for process industries, e.g. oil/gas refineries, chemical/petrochemical complexes, Power plants, steel and copper industries. Applied project management knowledge areas and safety Instrumented system analysis and design for process industries are my fields of interest.
Qualifications:
* Process Control Systems: Highly experienced in designing, programming, and site commissioning of Process Control Systems for different process industries for 15 years.
* Instrumentation: Experienced in sizing and selecting instrumentation for process industries e.g. oil/gas, chemical and petrochemical, water treatment and utility plants.
* I&C Detail Design: Proficient in preparing I&C documentation and drawings, e.g. Scope of work, I&C Specification, Instrument Data Sheet, Control Narratives, Hardware List, I/O List, Schematic Closed-Loop & Logic Diagram, and Wiring Diagrams.
* PLC, HMI, DCS Programming: Highly proficient in programming and configuring control strategies and HMI, sequential programming for PLCs, DCS systems in power plants, oil/gas, chemical and petrochemical industries.
* PC Skills: Fully fluent in Windows NT, XP, MS Office, MS Project, MS Visio, ACAD 2009, control valve and Instrumentation sizing softwares.

Work Experience
Honeywell Process Solutions (HPS), Calgary, Alberta Oct. 2007 – April 2009
During my employment in HPS, I was working for the Extraction & Tailings Silo of Fort Hills Oil Sand project at the EPC contactor office in Vancouver.
Position title: Project Engineer
* Achieved preparation of the Automation system architecture and scope of works for Hardware Cabinets, HMI Screens, Process Control Network, Fieldbus device interfacing, third party systems, e.g. Profibus, DeviceNet, Modbus RTU and TCP/IP, for FEED stage on schedule.
* Established professional relationships and regular meeting with client and EPC contractor team to ensure that the project requirements were fully defined and agreed upon.
* Collaborated with the Quality & Technical Team (QTT) to find out the optimum solutions for specific client requirements.
* Submitted cost estimation level 3 to the client in accordance with scope of works and bill of materials prepared during FEED stage based on Honeywell Experion C300 platform.
* Presented initiatives to reduce the cost of the Automation equipments in the Project Revive stage, which happened after FEED stage.

SNC-LAVALIN Engineers & Constructors Inc. (SLE&C), Sarnia, Ontario Feb. 2005 – Sep. 2007
SLE&C is an affiliated engineering and construction company to SNC-LAVALIN Group, and provides comprehensive engineering services to many companies located in chemical valley, Sarnia.
Position title: I&C Engineer
* Conducted the renovation control system project to replace a conventional control panel with Siemens PSC7 control system for Marysville Hydrocarbon Inc., Michigan, US.
* Prepared process instrument datasheets, installation drawings, BOM lists and scope of work for Butyl 2 Expansion project, LANXESS Chemical Inc., and submitted six weeks prior to deadline.
* Achieved safety work behaviour award and compliance with Imperial Oil Sarnia Cat Creep ULS project group in designing process instrumentation and controls for FCIS rate debottleneck project.

Oil Industry Engineering and Construction Co. (OIEC) Feb. 2000 – March 2004
OIEC is one the largest general contractor company in oil/gas, petrochemical, offshore and energy industries in Iran, and have engineering partnership agreement with Hyundai Group, Total Elf and Aker Kvaerner.
Position title: Control System & Project Lead Engineer
* Reviewed and commented on the I&C detail design documents and drawings prepared by CHEIL Engineering Co. from south Korea for a 150,000 tones/yr EDC/PVC plant, Ghadeer Petrochemical Co.
* Planned, directed and organized activities of the I&C team of the Ghadeer Petrochemical Co.
* Reviewed and finalized migration documents for the control system of the EDC plant from Yokogawa CENTUM-V to CENTUM 3000 DCS and for the PVC plant from EMERSON Provox to Delta-V DCS.
* Conducted designing, programming, commissioning and integrating control system of the de-mineralized & potable water treatment plants to the central SCADA system of South Pars Gas Refinery Plant, phase 1.
* Designed, programmed, commissioned and supervised installation an integrated control system, Simatic S7-400, for copper-melting furnace with Oxygen-NG fuel burners for Sarcheshmeh Copper Complex.

NEDA Automation Engineering Co. 1993 –Feb.2000
As a sub-contractor of Siemens A&D group in Iran, Neda Engineering Co. is an engineering and construction company specialized in electrical, automation and Instrumentation in steel, cement, and power plants.
Position title: Control System Engineer, Designer, and Programmer
* Configured, programmed and commissioned Siemens DCS, Teleperm-XP, for the Heat Recovery Steam Generator (HRSG) and the Heller cooling tower for Montazer Ghaem combined cycle power plant under the supervision of the Siemens power generation group.
* Participated in commissioning and start-up the steam turbine control system for the above-mentioned project.
* Participated in FAT for the DCS system of the above-mentioned power plant, in Erlangen, Germany.
* Designed, programmed and commissioned a fully redundant fail-safe Siemens Simatic 155F and HMI for the Direct Reduction Steel Furnace plant, National Iranian Steel Co.
* Designed, programmed and commissioned a fault tolerant Siemens Simatic 155H and HMI for the Blast furnace II plant, National Iranian Steel Co.

Professional Designation & Membership:
P.Eng. from Professional Engineers Ontario (PEO)
P.Eng. from APEGGA
PMI member

Education:
1985–1990 B.Sc. in Control & Instrumentation Engineering from Sharif University of Technology

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 7053)

Go to Search Parameters...

Brief Description

Industrial Eng. with master degree in HSE. Title obtained: HSE eng. Specialist

A production/well completion engineer with over 20 years experience in Canada and overseas

I have Very good Experience in the Petrophysical Operation, Studies and Well reservoir Survillance. Have experience in QC/QA of integrated studies. Have leadership experience

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Multi skilled engineer, Technical Advisor, Mud Engineer

15 years Mechanical Engineer within Oil / Gas & refinery industry, inclusive 5 years maintenance experience; 5 years for nuclear power project; P.Eng of APEGGA, Canada

Can perform both technical work and sales work involving oil/gas industry more specifically as an advisor, planner, support or salesperson.

Drilling Engineer – DCWO planning, programming, engineering, operations evaluation, performance analysis; deep HPHT gas wells, high deviated, ERD and horizontal oil wells, sidetrack wells; land operations; harsh desert (Middle Asia) and arctic (Siberia) environment; English-Russian-Slovak

Senior Mechanical Engineer experienced in detailed mechanical / thermal / process and E&I design of Fired Heaters, Reaction Furnaces, Reformers, SCR’s WHRU’s, Boilers, Incinerators, Flares and associated ancillary equipment. Very strong E&I, DCS / PLC & BMS skills.

By working 17 years in the field of petrochemical field, I experienced all kinds of key projects like FCCU, Hydro-cracking unit, Hydro-treating unit and have expert ability to do piping static and dynamic stress analysis. Also I have five years working experience as a mechanical engineer in refinery

35 years of experience in the process industry working for engineering firms, equipment manufacturers, chemical company

Conducting a piping training program from zero skill up to a skill trainees supervising the assigned work from planning, organizing, leading and controlling. Performed piping work activities from designing and drawing the piping tie-in to existing pipelines, drawing various structural platform

Twenty years of professional experience in, design, consultancy, construction and maintenance, covering a broad range.

25 years of experience in construction, installation, commissioning, testing and maintenance of Electrical, Electronics and Instrumentation equipments and controls in Petrochemical Industry

Have more than 20 years experience in Piping Design and Engineering including Stress Analysis and Piping Materials Control for various projects in petrochemical plants, refineries and commercial chemical plants. Presently working in Worley Parsons (Colt Engineering Corporation), Calgary, Canada

Overview: Thirty (30) years of engineering management experience, 25 years of which were in the oil, gas and shipping industry and EPC projects that include the following: Project management, conceptual, feasibility studies, detailed design engineering, procurement, constr. and commissioning

Over 18 years experience in 2D and 3D seismic data processing. Processing land desert and mountain data. Processing experience gained in Geofizyka Krakow Ltd, WesternGeco and CGGVeritas. User knowledge of Unix, Linux , excellent Omega SPS and Tango, basic ProMAX. Good MS Office skills.

Advanced Process Controls, RealTime Process Information Systems, LIMS

PROJECT MANAGEMENT, CORROSION & MATERIALS,INSPECTION & INTEGRITY ENGINEER/MANAGER

More than eighteen years of experience in premium International Oil and Gas Engineering Consultancy Companies within the field of Process Safety, Technical Safety and Loss Prevention.

well services, production technology, safety, beam pump

Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.

Reservoir Geologist  To perform characterization Reservoir integrated Studies and reservoir Modeling. Generation and evaluation Geological Prospects and development opportunities. Elaborate Exploitation Plans. Planning (targets) and monitor of Special Wells. Volumetric reserve estimations.

Primavera, MS Project, MS Office, EVMS, Planning

Versatile technology professional with expertise as a Senior Reservoir Engineer and Operations Business Manager. Resourceful problem solver who performs well under pressure. Outstanding leadership, organizational, and communication skills. Granted Top Secret Security Clearance. Analytical.

More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic

SmartPlant 3D/P&ID Application support

I wish to apply for suitable position in the highly motivated & challenging environment. I am having 21 year of experience in different fields of Gas, Petroleum and Chemical industries. Also involved actively involved as an engineering material coordinator. I am having experience in identifying

More than 20 years experienced in project design services which involved mechanical and piping design preparation of conceptual design packages and detailed design packages, specification of pipes, fittings, valves and other specialties. Developed specifications for pumps, steam turbines, tanks, pre

A total of 15 years of professional work experience, (9) years in the Gulf region, of which seven years Were in the oil/gas, petrochemical, power/desalination plant and building construction projects. A Computer literate and proficient in oral and writing English communication skills.

Geophysicist position in a oil-field services company. I have more than 18 years of seismic data processing and data management experiences.

Welding Inspector, CSWIP 3.2, ASNT-II Certified, 18 Years working experience in Oil and Gas Industries in various countries.

Has 20 Years Expeierence in various aspect of Control and Automation and last 7 years in Middle East with ABB /Invensys. Has done large projects and several latest DCS/ESD systems such as Triconex,ABB infi90 , Foxboro I/A , Honeywell TDC3000 etc

I am qualified Degree chemical Engineer from the reputed Maharaja Sayaji Rao Uni, Vadodara

I’ve total of Eighteen (18) years experience in the area of Pipeline design and Piping design for oil & gas and petrochemical projects.

Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion

Expertise in gas sweetening, gas compression, gasification process, and U&O facilities.

Over 16 years experience as Electrical Engineer

I have been a Process Engineer for 16 years. My experience includes process design of oil, gas and petrochemical plants and steam and power generation units, expertise in conceptual design, basic design, FEED and detailed engineering, experienced also in optimization and troubleshooting projects.

Over 20 years experience in chemical, petrochemical and oil&gas industry.

Presently working as Sr APC & Opt Engineer in Qatar Petroleum Refinery. A total of 20 years experience in Petroleum Refinery industry (8 years in APC & Opt, 5 years in Technical Services and 7 years in Operations).

I have extensive experience in Oil&Gas industry and EPC, I have extensive experiencey in Rotating Equipments Design and I worked in a refinery in Egypt as the Head of the Rotating equipments for 14 years.

Having achieved many goals in my long career how MECHANICAL ENGINEER, I am interested in continuing my professional horizons by working as a FLEXURAL STRESS AND MECHANICAL PIPING DESIGN AND LEADING MECHANICAL ENGINEERING PROJECT for your respectable company.

Have about 25 years of experience in logging operations (Open hole, Cased hole and Production Logging Services) and interpretation of well logs (Open hole, cased hole and Production Logging)

To provide technical expertise of piping, mechanical engineering for Oil & Gas, Petrochemical, Power plant. Support to projects management, Supply division and projects controls through all phases of major and minor projects

Process Design Engineer with experience o fEPC contracts in Saudi Arabia. I also have expereince in operating plants, providing plant support. I am currently working as Technical Manager of 20 process engineers, doing small projects execution for Sasol Infrachem Utilities.

Seismic interpreter and reservoir geophyscist with experience in reservoir modeling, geostatistics and rock physics

An experienced Control & Instrumentation Engineer with extensive achievements in leading, designing, executing, and organizing project activities for process industries, e.g. oil/gas refineries, chemical/petrochemical complexes, Power plants, steel and copper industries.

Accomplished PLC, HMI, automation, programmable controls specialist

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out