Resume - i am looking for dimensional survey engineer job. i have complite Diploma in Ma...

Misco Jobs

Resume #85715

CONTACT INFORMATION:
View contact information...

To be able to land on a promising career related to steel/structural where acquired knowledge will be fully utilized and applied. The opportunity to contribute organization's goal and objectives with combine skills on hands-on and technical knowledge and strong work ethics. To encourage the value of efficiency, productivity, commitment and dedication to service

Almost Seven (7) years working experience in various welding practices, involving quality control, structural & Dimensional surveyor, with emphasis on inspection of various steel structures. Mostly in marine industries, involve conversion project and construction for new jack-up Rig, FPSO, same submersible etc. also various training related to expand technical skills.

GENERAL INFORMATION:
Father's Name: Lutfur Rahman
Date of birth: 31st December' 1985
Nationality: Bangladeshi (By birth).
Sex: Male
Marital status: unmarried
Languages known: Bengali, English
Passport no: V0875779
Fin number for Singapore: G7537481Q
Address [Bangladesh]: Village- puzkara
Post- puzara bazar
Nangulcot, Comilla,
Bangladesh-3570

EDUCATIONAL BACKGROUND:

* Diploma in Marine & Offshore Technology (Full time Equivalent) Ngee Ann Polytechnic, Singapore.
Year of Graduated - September 2008.

* Basic Land Surveying course, (part time) Singapore Institute of Surveyors and Values, Singapore.
Year of Graduated - April 2008.

* Ship building welding course(SBW) (Full time) Bangladesh Institute of Marine Technology, Narayangonj, Bangladesh.
Year of Graduated - February 2004.

* Have completed 6 (six) months job training as a Metal Ship Building Welding & ship Wright platter from Khulna shipyard Ltd. Bangladesh.

* Secondary School Certificate (SSC)

Group - Science.
Bholin bazaar high school,
Comilla, Bangladesh
Year of Graduated - 5th July 2001
* Basic Marker Training from Association of Singapore Marine Industry (ASMI). Singapore.

WORK EXPERIENCE:

Name of Organization: Keppel Fels ltd, Singapore.

Post Hold: Dimension Controller (under hull)

Period of Service: 25th March 2004 to 18th March 2007

Job description
ƒæ Dimension, Alignment, straightness and flatness check for Vessel, Superstructure, Module Stools, Crane Pedestal, sub-Blocks, Columns, Cantilever, Jack-case, spud-can, and Machinery item such as mooring winches, windlass, fairlead brackets and foundation etc.

ƒæ Preparing control points on building berth area for surveying.

ƒæ Marking the layout of structure and arrangement for keel blocks in integration as per drawing.

ƒæ Answering queries from the class surveyors and owner's at the time of inspection.

Name of Organization: Dyna-Mac Engineering Services Pte Ltd.

Post Hold: QA / QC Inspector. (Dimensional / structural)

Period of Service: 07th April 2007 to 2nd October 2008
Job description: As a QA/QC Inspector (Dimensional / Structural)
my daily duties and Responsibilities are as follows.

ƒæ Plan & lead production team.

ƒæ Check Dimension, Alignment, Straightness & Flatness for Superstructure, Sub-Blocks, Columns, Turret and Crane Pedestal etc. Find out the defect of job, And Instruction given to line supervisor, in order to rectify the defect.

ƒæ Communicate & Coordinate with owner rep. During Inspection the jobs. And answering queries from the class surveyors and owner's at the time of inspection.

ƒæ Marking the layout of structure and Position of keel blocks in Integration as per drawing. Also preparing the control points on building berth area for future surveying and witness to class surveyor & owner.

ƒæ Marking the position and check the Alignment, Dimension and Level for installation the machinery items such as mooring winches, columns, turrets, shaft, flare towers, fairlead brackets and foundations etc.

ƒæ Preparing dimension Inspection reports by AutoCAD for submit to class surveyors, owner's & top Mannesmann of the yard.

Name of Organization - NorCE Offshore Pte Ltd. (client Refesentative)
In Bintan office, Indonesia.
C/O- Tiong Woon Oil and Gas, 13Pandan Crescent, Singapore, 128496

Post Hold - Dimensional survey engineer. (Under Engineering Department)

Period of Service - 07 November2008 to till date.

Job description: As a Dimensional survey engineer
My daily duties and Responsibilities are as follows.

ƒæ Sit coordinator for block erection in Integration Dimension check for block & give the information to sit supervisor for place the block in right position during integration.

ƒæ Solve the problem timing of Block Erection in Integration and assembly, to control Alignment of ship and Dimension keep in Tolerance.

ƒæ Alignment, Dimension check and position mark for mechanical instrument, Pump, Trustier, Jackets on Barge in onshore and offshore as per drawing.

ƒæ Dimension, Alignment & level check for block. Sub-block in Integration & Assembly. Prepare reports in AutoCAD and submit to top management and main conductor to maintain the good quality.

ƒæ Communicate with main conductor and sub-conductor in assembly and Integration to maintain the Alignment and Dimension of Ship with in Tolerance.

Good interpersonal and communication skills and ability to work independently & Positive working attitude.
Responsible for the checking of dimensions, levelness, verticality, flatness, Block Erection, etc.

Computer Skills: Mechanical Auto CAD, Microsoft office package (Excel, Word, PowerPoint, project, photo editor) with recognised skill.

TOOLS AND EQUIPMENTS CAN USE:
I am very interested and Sound knowledge of TOTAL STATION, EDM, Totalise, Auto level and others survey instruments for dimension control.

Here by I certify that the above particulars are true to my knowledge.

I am confident that my knowledge and experiences shall provide valuable contributions to enhance efficiency and prove to be an asset to your company.
I look forward to an interview with you.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 7051)

Go to Search Parameters...

Brief Description

On line analyzer & Field Instruments Installation & commissioning Experience, DCS & PLC maintenance level experience

B.Tech from IITK, 6 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

A Logging Analyst in the Syrian Petroleum Company. A Petrophysicist in Al Furat Petroleum Company, responsible for many fields for all petrophysical operations and formation evaluations. Petrophysics section head, Wireline logging, perforation and core analysis contract holder.

Extensive Wonderware software experience including Industrial Application Server and System Platform products. Expert industrial PC skills. Extensive experience with Microsoft Virtual Server and Terminal Server products.

I have involved in petrochemical, oil/gas, and heavy industrial projects. I have strong academic achievements, excellent interpersonal skills, and positive attitude, Commitment and desire to perform engineering design. I am also exceptionally well organized and highly motivated and able to pull toge

To obtain a challenging position in your organization where my technical and management skills can be effectively honed and utilized and to gain practical experience in the realm of Civil/Structural Engineering.

Over Eight years of multidisciplinary Civil Engineering experience

Instrumentation & Maintenance industrial Engineer

Substation primary design engineer for high voltage substation

DEEE with 4 years Triconex Knowledge

I had passed bachelors degree in safety and fire engineering.Passed NEBOSH international certificate in occupational Safety and health.

I have 13 years in piping design and drafting field for Oil and gas industry

I possess hands on experience in developing EMS (ISO 14001) and OHSMS (OHSAS 18001) procedures in line with International best practices, performing HSE audits, leading EIA and Risk Assessment study teams, assisting in development of emergency response / contingency plans e.t.c,

Vast experience of planning, Management reporting, Refinery Economics,Vast experience in Petroleum Refining. Confident and result-oriented, Able to analyze and apply problem solving and decision-making techniques to achieve desired objectives within target deadlines.

16+ years experience HVAC Engineer with intension to work in Oil and Gas field

Sr. Projejct Document Controller-Exp of 12 years in Oil & Gas/Power Project Industry

Thirteen (13) years of extensive and diversified experience in managing and leading variety of upstream Oil & Gas handling, Chemical & Petrochemical Projects.

About 16 yrs of experience in the field of Civil Engineering Design, Construction & Inspection and Document Control for turn over (Piping Test Packages, Punch list & etc) & dbase management using MS Access program.

Electrical Intrument & Control System

Lead Mechanical Engineer, 17 years of experience in preparation of Specification/ Material Requisition/ Proposal/ Scope of Work; Design Basis and calculations, Technical & Cost Evaluation; Vendor Drawing Review, Static, Rotating and Material Handling Equipment and Mechanical Packages

Senior Piping Designer with 20+ years experience. AutoCAD, AutoPlant, Excel, Access, Word, Outlook.

Wireline supervisor or wireline consultant

Geoscientist with experience of working in a multidisciplinary team in a major E and P company. Experienced in Seismic modelling and Interpretation, and reservoir modelling. Holds an M.Sc in Petroleum Geoscience.

Process Engineer with over 11 years oil and gas engineering background. Design experience of Liquefied Natural Gas import terminals and process simulation experience of base load liquefaction trains.

Structural engineer with over 14 years experience in EPC projects (grass root and revamp) in refineries, petrochemical plants, spinning mill, cement plant & other industrial units.

OBJECTIVE: To utilize my experience in manufacturing and construction. Using various software programs, and engineering disciplines, (24,000hrs) Of AUTOCAD experience.

More than 14 years process & project engineer experience in Oil & Gas and Oil Refinery.

CAREER OBJECTIVE A suitable, challenging, and rewarding position in Petroleum Engineering.

Working Experiences as Senior Process Engineer from 1992 - 2003 in LNG/ LPG Plant of PT. Badak NGL in Bontang East Kalimantan Indonesia. I have been working for PT. Badak NGL over 20 years. Previous Job experienced in PT. Badak as Senior Production Planning Engineer from 1983 - 1991.

ERP Consultant (functional and technical) : MFG-PRO and Progress, Axapta, Movex, SAP Software Development Project Manager : Visual Basic, Oracle, Access, SQL-Server

I have multilingual skills and am fluent at Russian, Turkish and good atdrilling

Proactive and skilled professional with a solid supervisory background and experience developed on projects in Venezuela

Good Capability and ability to get goal the project with safety, quality, planning and costing

Using FEM packages (COSMOS, ALGOR) to analyze structures and components (Stress, Stiffness, Fatigue, etc). Document drafting and review (Calculations, P&IDs, MITPs, etc.).

More than 23 years experience as Sr. rotating techn/foreman in the refinery, responsible for the repair, troubleshooting, modification, preventive and predictive maint. of all rotating equipt.; ensure safety, planning, scheduling of personnels, preparations of tools and spare parts.

Stress Analysis of critical lines connected to static as well as rotating equipments like exchangers, columns, reactors, pumps, compressors. Super high pressure steam lines, lines connected to ‘cold box’ (Cryogenic lines), and expansion loop sizing for rack lines, analysis of pressure safety valves

A highly experienced MBA professional with exceptional interpersonal and communication skills and an external extensive background in the following broad-based competencies: Procurement/Supply Chain Management Strategic Planning; Contract Negotiation; Business Development

Wire line logging: done a special six months course on wire line loggingIn which I Have studied all the logs their specifications, uses, tools, interpretation etc, like gamma ray, sp log sonic log, neutron porosity logResistivity & conductivity log, density &photo electric factor log etc.

Crude oil storage tank construction experience as per API 650/653

i am looking for dimensional survey engineer job. i have complite Diploma in Marine & Offshore Technology.i have been work for Keppel fels Shipyard 3yers. Dyna-Mac shipyard 1.5years. now working for Norce offshore in Indonesia for DLB Projct.

I Mr. Noel C. Atienza 12 almost 12 years experience in oil and gas as a senior mechanical technician, including as a machinery supervisor. I'm permanent residence in singapore

a great job seeker of electrical field

Pipeline Integrity Engineer / Project Engineer / Design Engineer

Technical Assistant to Reservoir/Production/Petroleum Engineering.

BSc Chemical Engineer Having Six Year experience in Petrochemical Industry

Currently working in SNC LAVALIN ENGG INDIA LTD. Mumbai and deputed to SNC LAVALIN EUROPE B.V. BRANCH to Shaybah, saudi arabia as a PDS ADMINISTRATOR. My job profile is related to Piping Engineering and PDS(PLANT DESIGN SOFTWARE),RIS (Relational Interface

Controls and Instrumentation Engineer / ESD-Triconex & DeltaV SIS/ 6+year Exp

Provide structural engineering, construction management, real estate due diligence and expert witness services.

Innovative Professional with 26 years of progressive experience in engineering design, maintenance planning and management, including 16 years in the Oil/Gas industry.

Over 18 years experience in construction, installation and mechanical assemblies, heavy

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out