Resume - I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experienc...

Misco Jobs

Resume #85746

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
o Expert knowledge in drilling, completion and workover fluids in offshore and onshore environments.
o Well experienced in wellbore instability problems and their solutions o Excellent Knowledge in formation damage assessment and control.
o Wide petroleum engineering background.
o Excellent research comprehension.
o Information Technology and good communication skills
------------

OBJECTIVE:
------------
The main objective is to provide innovative enhancement in drilling and completion fluids for reducing well operation costs (drilling and workover) and protecting reservoir formation from wellbore fluids aggression. This will only be achieved if a hard work has been offered including Laboratory and modeling. I believe that I have the right attitude and experience for working forward to look for new solutions and techniques for solving various wellbore instability and formation damage problems.
------------

WORK EXPERIENCE:
------------
2008 – Now,SONATRACH, ALGERIA
Currently I am working as a drilling fluids advisor for all SONATRACH drilling and completion operations in Algeria. In this position, I work for following up daily drilling operations, troubleshooting of drilling rig problems, and performing technical support for solving wellbore instability and formation damage problems. Work in a team for applying and suggesting new technology for improving drilling performance.

2005 - 2008, MI-SWACO, Scotland – UK
In this period, I worked as a senior drilling fluids engineer for MI-SWACO in the North Sea - UK sector. I was one of the key personal in managing and running the must advanced drilling fluids for most of the major Companies in the UK including: Shell, BP, Talisman. Centrica, Apache and Peak-Group.

2002 - 2005, MI-SWACO and Aberdeen University, Scotland – UK
Internship and Research – Key responsibilities. Experimentation and lab based work testing the impact of drilling fluids on oil well productivity and analysis of the around wellbore productivity impairment as a part of a postgraduate experimental work.

1985 - 2001, OWFE for Oil Technology, Libya.
o Hands-on operation supervisor.
o Troubleshooting and hands-on training of new engineers.
o Senior drilling fluids engineer.
o Drilling and completion fluids engineer.
------------

EDUCATION & CERTIFICATION:
------------
2002-2005 PhD Analysis of Downhole Factors Manipulating Formation Damage, Aberdeen
University Aberdeen - UK
1997-1998 MSc Petroleum Engineering, Heriot-Watt University, Edinburgh – UK
1980-1985 BSc Petroleum Engineering, Al-Fateh University, Tripoli - Libya
------------

ADDITIONAL INFORMATION:
------------

Training Courses
-----------------
2005 - 2007, Mi-drilling Fluids, Aberdeen – Scotland
Attended training courses on:
o Offshore Survival Training Course, Aberdeen, Scotland o Offshore Firefighting Course o Drilling Fluid Softwares.
o Also attended many different technical seminars during working in Aberdeen

Jan. – Mar. 1992, MI-Drilling Fluids, Calgary-Canada.
Attended an advanced drilling fluids course. This course covered wellbore problems and treatment, drilling fluids chemistry, advanced mud systems and selection of drilling fluids.

Oct.- Dec. 1991, Southern Alberta Institute of Technology Calgary – Canada.
Participated in a drilling engineering training course covered well planning, cement design, casing design, hydraulic design and mud programming.

April - May 1986, Bright Stare Technical University – Libya.
Attended mud school: the basics in drilling fluids engineering.

Aug.1986, Libyan Oil Corporation - Libya.
Received training on "well logging and drilling engineering".
----------

Publications
------------
o PhD Thesis,entitled: INVESTIGATIONS OF THE FILTRATION PARAMETERS OF DRILLING FLUIDS FOR OPTIMISING OIL WELL PRODUCTIVITY

o SPE Paper Number 120867 (potential increase of formation damage at horizontal wells as a result of changing dynamic filter cake properties with the shear rate).
-------------

Languages
-------------
Arabic (native) and English – fluent
---------------

Extracurricular Activities
--------------------------
Travelling, reading, driving and charity work.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 7037)

Go to Search Parameters...

Brief Description

Free! Completion Supervisor for vertical and horizontal wells with 14 years experience

Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position

Experienced Ph.D Reservoir Compositional Simulation Engineer

Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC

I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.

30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.

cfd, thermal, aircraft, turbomachinery

I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .

A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for

A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi

I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc

23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)

Process Flow Assurance Engineer

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

I had a master degree in structural engineering from the University of Southern California.

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

More than 25 years in OIL & GAS Offshore and Onshore Industry.

Senior Geologist - Develoment Geologist - Advisor

Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation

Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.

MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities

Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.

Control System Engineer

Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects

Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.

Mechanical maintenance trainer

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design

27 years experience in reservoir engineering, from field operations to pressure testing and simulation.

A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c

SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out