Resume - Maintenance & Mechanical Commissioning Supervisor

Misco Jobs

Resume #85759

CONTACT INFORMATION:
View contact information...

Date Of Birth: 29th January 1970
Marital Status: Married
Nationality: British

PROFILE
Physically fit, safety minded and a mentally active person possessing considerable experience gained with international companies on and offshore in industries such as, mechanical & pipeline commissioning, gas compression, power generation, open cast quarrying and large-scale construction. This is also combined with 4 years service with the Territorial Army (Parachute Regiment). Very keen to find a position offering good prospects and one where my skills, qualifications and experience already acquired may be used to the benefit to an employer and myself.

LANGUAGES: English is my first language and I can also speak very basic Russian which I want to improve on.

EDUCATION, TRAINING AND QUALIFICATIONS

June 08 Sakhalin Energy Permit To Work (PTW) & Permit Authority
SEIC-Shell (PA) course

March 07 BP Permit To Work (PTW) & Permit Authority (PA) course
BP AIOC

06-08 Feb 07 BOSIET – Basic Offshore Survival Induction & Emergency
ETSDC Training

06-07 June 1999 Microsoft Word 97 Introduction
Execu Train

13-14 June 1999 Microsoft Excel 97 Introduction
Execu Train

1987-1990 Diploma in Maintenance & Repair of Construction Institute of City & Guilds Plant Equipment.

1981-1986 CSE passes in mathematics, English language,
Laurence Jackson School Physics and Motor Vehicle Technology.

EMPLOYMENT HISTORY

2008: Hydrotest & Completions coordinator – Shell Sakhalin Energy
Coordination of, caliper runs, hydro testing, dewatering, pre-drying & drying, caliper runs and inerting on both the 48'' and 24'' lines, mechanical commissioning activities at the OPF pig trap station and AGI locations, also assisting with ops going live preparation and handover to operations.

2007: Senior Mechanical Commissioning Supervisor – BP AIOC
I was recruited by AIOC BP in Azerbaijan to assist with the commissioning of Phase 3 of Sangachal Terminal Expansion Program (STEP). My mechanical commissioning activities including raising relevant Permits To Work (PTW) for my crews, overseeing & coordinating with the N2 leaking / bolting contractor, supervision of a 30 man crew of Russians, Pilipinos and locals. Other responsibilities and involvements included plant start-up, controlling the Flash Gas Compressor N2 clean-up runs on both trains, P&ID Green Lining, Tri-Party walk-downs, Comms Punching, Pneumatic Line Air Blows, No Load & Loaded Motor Runs, coupling alignments, belt tensioning, pump & cooler runs and GOC certification from MM1 through to SH1.

2004-2006: Maintenance Supervisor - BJ Services
Returned to BJ Process & Pipeline Services in Baku Azerbaijan. My role included starting and controlling a preventative maintenance program for up to 7,000 BHP of Process & Pipeline commissioning equipment. I also controlled the day-to-day support for their N2 leak testing & Process Commissioning programs, bolt tensioning and commissioning activities, also including base management, procurement and logistic activities and relief work for the Project managers whilst out on leave.

2004: Freelance Compressor Commissioning Engineer.
Worked freelance in Indonesia for Universal Compression Inc (UCI) commissioning two 16V-AT27GL Waukesha engines driving 3 stage JGC-6 Ariel compressors each producing 25 MSCM per day.

2002-2004: Maintenance Supervisor BJ Services
Hands on roll for BJ Process and Pipeline Services based in Kazakhstan. My responsibilities included all day-to-day Base & workshop activities, supporting the daily N2 leak testing, bolt tensioning activities, setting up and running a PM system, controlling the spare part, major rebuilds of several N2 pumps, winterization of all equipment, operational logistics and local and international procurement..

1999-2002: Commissioning / Service Engineer – GSI Weatherford
My normal day-to-day responsibilities included commissioning and start-ups of new and reconditioned reciprocating gas compressors and Waukesha and Caterpiller gas engines. Site visits to trouble shoot & rebuild client owned equipment was a large part of my roll, traveled extensively throughout the Middle East, Africa & Asia commissioning new compression packages supplied by GSI, and on occasion for Universal Compression, undertaking all mechanical, electrical & instrumentation tasks. In the summer of 2001-I Project Managed the remanufacture of two RDS-4 compressors driven by Waukesha L7042GSI engines for Oxidental of Oman.

June 98-Aug 99: Senior Mechanic – BJ Services
Joined BJ Process & Pipeline Services in Dubai. There I supervised all repairs, rebuilds, overhauls & any mechanical or electrical upgrades to all their rotating and nitrogen equipment. My duties also included the day-to-day management and supervision of all the workshop TCN.

Apr 97- June 98: Senior Service Engineer - Aggreko
Recruited by Aggreko Power Rental in the UK. I was then sent to Oman in the Middle East. My function was to undertake all maintenance and repair work both mechanical and electrical on their generator packages. Aggreko had only operated in Oman since September 1996, so I was also responsible for locating suppliers for all electrical and mechanical items required to keep a fleet of generators totaling 25 MVA running. Approximately 50% of my time was spent working in the interior of Oman working alongside PDO providing power to their down hole electrical submersible pumping equipment in remote locations. I also commissioning projects such as 5 MVA synchronized with the grid, and 4.2 MVA synchronized as an island for the local Government.

Dec 95 – July 96: Workshop Supervisor – Steven Rock
Offered and accepted a three month contract with Stevin Rock Joint
Venture in Ras-Al-Khaimar U.A.E. After the completion of this a further three months was offered and accepted. Duties included the organization of manpower within the workshop, ensuring that both maintenance and preventative maintenance and repairs were carried out to the large static and mobile plant equipment. Also responsible for all equipment involved within the 24hr barge loading operations including grabs, shovels, off highway dump trucks and tugboats. Further to this I oversaw the inspection and repair of their tugboats and barges whilst in Dubai Dry Dock for repair.

Feb 95 – Dec 95: Plant Supervisor – Wimpey International
Joined Al Futtaim Wimpey in Dubai working on three major projects.
These consisted of a major roads and interchange project at Karama, the construction of the Deira City Center and an oil tanker berth in the Jebel Ali free zone. I subsequently left Wimpey due to the company take over by Tarmac.

1994-1995: Heavy Plant Fitter – Short Bros Plant Ltd
Subcontracting to Short Bros Plant Ltd in British Steel's Redcar plant in the UK. I worked unsupervised on all aspects of plant equipment used by British Steel and Short Bros such as off highway dump truck, loading shovels, screens and crushing plants.

1987-1994: Plant Fitter – Wimpey PLC & Wimpey International
Four-year apprenticeship in Engineering Plant Equipment Maintenance with
George Wimpey PLC and successfully gained City and Guilds in this discipline Fully qualified and skilled covering the hole of the North East of England. Worked on major projects such as the Enron Power Station caring out on site repairs then went overseas to Jordan where I worked on all plant equipment involved in the construction of a potash treatment plant and supervised up to 40 Indian / Arab Nationals.

Countries Worked in:
Angola, Australia, Azerbaijan, Equatorial-Guinea, India, Indonesia, Jordan, Kazakhstan, Kuwait, Nigeria, Oman, Pakistan, Qatar, Russia, Singapore, Turkey, U.A.E, Yemen.

Territorial Army:
1989-1993 Member of the 4th Battalion of the Parachute Regiment of the Territorial Army. Fully qualified military parachutist and attended and passed courses covering skills at arms and marksmanship.
Left in 1993 due to work commitment in Jordan (see above).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 7055)

Go to Search Parameters...

Brief Description

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

PDS Frameworks, Autocad, Microstation

Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer

Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Management and supervisory skills

I am a Senior Petroleum Engineer Technologist with over 20 years oil and gas experience. My diverse background provides a comprehensive knowledge of all aspects within the petroleum industry.

Departmental development and management of process, staff and workflow integration into corporate operations.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

DSV with over 20 years experience.

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

Experienced Materials Metallurgical Engineer seeking a position in research and development facility. Has experience with fuel cells technologies, fuel reforming materials and processes, automotive industry, hydrogen related technologies, engine mechanical design.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Project Engineer with Australian education, canadian experience and with very good project management skills.

Pipeline, Facilities and Project Engineer.

More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations

Good working experience on Instrument and control system

Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National

8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,

QA/QC Enginner

Reliability, Maintenance, Planning and Material Engineer- Mechanical

More than 15+ years experience in process operation

Telecom field technicians Customer end

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out