Resume - I am having 6 years of experience in PDMS I have done B.Tech in Mech Engg . •Exp...

Misco Jobs

Resume #85889

CONTACT INFORMATION:
View contact information...

Totally 6 years of experience in piping design using PDMS.
Exp.in Oil & Gas Floating Platform Project(offshore)
Experience in Equipment modeling, pipe routing from P&ID's, structural Modelling & other piping design related work. Knowledge of Plant layout design, Plot Plan, PFD's
Knowledge of code and standards like ANSI,ASME,NORSOK
Good communication skills, Good co-ordination with team members and superiors, Good presentation skills, Responsibility towards assigned work.

Completed B.Tech in Mechanical Engineering from
JNTU Hyderabad JNT University, Hyderabad, A.P. (2002)

Completed Diploma In Mechanical Engineering from
Sir.C.R Reddy Polytechnic, Eluru, S.B.T.E.T, A.P. (1996)
Project: 1: Gjoa Semi EPCH
Owner: STATOIL, Client: AKET, Norway.
Site location: NORTH SEA, NORWAY,
S/W used: PDMS 11.6
Product: Oil & Gas

The Gjøa Semi Submersible Floating Platform is developed for production of hydrocarbons at the Gjøa Field located approximately 60km north-east of the Troll C platform (Norway). This is the biggest ever Floating Platform in the world.

Roles and Responsibilities:
* Equipment modeling by using GA drawings
* Preparation of Piping Layouts for different Systems
* Piping design in 3D model Using PDMS from P&ID's
* Ensuring that the Piping Design confirms to requirements for Erection, Fabrication, Testing and Installation.
* Review of vendor drawings and documents
* Modeling of the Access Platforms & access ways.
* Issuing Isometrics to IFC using PDMS
* Review of P&ID's for various systems
* Markup the P&ID's as per piping design in model
* BOM'S generation and checking
* Data consistency checking
* Support marking in layouts and 3D Model
* Report Generation using PDMS
* Clash Checking
* Coordination with other Departments to take care of
Process & Piping requirements
Attending Model reviews with client concern to the areas
Etc….

Project: 2: SRL Compressor
Client: B.H.E.L, Hyderabad

Roles and Responsibilities:
* Equipment modeling by using GA drawings
* Piping design in 3D model Using PDMS from P&ID's
* Review of vendor drawings and documents
* Issuing Isometrics to IFC using PDMS
* Markup the P&ID's as per piping design in model
* BOM'S generation and checking
* Data consistency checking
* Report Generation using PDMS
* Coordination with other Departments to take care of
Process & Piping requirements

Project: 3: Governing Console and Lube Oil Piping for 1 x 15MW
Client: ACC chaibasa

Roles and Responsibilities:
* Equipment modeling by using GA drawings
* Piping design in 3D model Using PDMS from P&ID's
* Review of vendor drawings and documents
* Preparation of Bill of Material for piping as well as supports

Project: 4: Numaligarh Motor Spirit Compressor
Client: Numaligarh refineries Ltd, Chennai

Roles and Responsibilities:
* Equipment modeling by using GA drawings
* Piping design in 3D model Using PDMS from P&ID's
* Review of vendor drawings and documents
* Machinery arrangement & foundation for compressor, Steam turbine, coolers, separator, lube oil console, accumulator, control panel, seal gas skid.
* Generation of isometrics,Prepare bill of materials

Project: 5: Vizag Vessel Project
Client: Indian Navy

Roles and Responsibilities:
* Worked as Design designer for Directorate of Naval Design, Mumbai.
* Involved in the project Modeling of all Equipments, piping, Structural, etc.
* Placement of all models according to design. In routing of pipes, models of Pipes releases as spools.
* Transfer these spools to AutoCAD by using FTP-32 software.
* Extraction of Iso drawings of piping spools, DCR incorporation.

Software:
Design: PDMS 11.6/11.5, AutoCAD,ProArc
Unigraphics- NX3, Catia- V4/V5
Good command over all the modules listed below of that of PDMS design
* Piping design
* Equipment modeling
* Structural modeling
* Draft
* Isodraft

* Experience in Layout design, Routing of Lines for various systems like Hydro carbon systems, Hydraulic Oil System, Fire Water System, Cooling Water Supply/Return System, Hot Water System, Open Drain System, Closed Drain System, Hydrants System, Flare system, Sea Water System, Utility systems, Fuel Oil System, Turbine Main Steam Piping System, Condensate System, Lube Oil System, Feed water suction and discharge system, Ammonia System, Power Piping & Oil and Gas Systems.
Problem solving ability. Coordination with other disciplines and piping designers.

Organization: ITC Infotech India Ltd, Bangalore.
Period of employment: Oct 2008 to till date
Designation: Associate IT Consultant(piping)

Organization: Aker Solutions Pvt Ltd, Mumbai
Period of employment: Oct 2006 to Oct 2008
Designation: PDMS Design Engineer

Organization: Larsen & Turbo-HED,Visakhapatnam
Period of employment: May 2004 to Sep 2006
Designation: Design Engineer

Organization: B.H.E.L, Hyderabad
Period of employment: Mar 2003 to Apr 2004
Designation: Project Assistant

PERSONNEL PROFILE:
Martial Status Single

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 7041)

Go to Search Parameters...

Brief Description

Excellent working knowledge in Piping stress analysis using caesar II

GIS Specialist

I am a Mechanical Engineer with over 20 years of oilfield experience in Drilling, Well Intervention, Cementing and downhole tools

B.E. Mechanical engineer with 6 years experience

Coating Inspector

Seeking assignments in Quality Assurance, Quality Control & Inspection for Pressure Vessels, Piping, Pipeline, Structures, Test Pack, Plant Construction and project execution with a reputed organisation in Oil&Gas.

Sulphuric plant operator ITI (AOCP NCTVT)

I am having 6 years of experience in PDMS I have done B.Tech in Mech Engg . •Experience i

Instrument Engineer with MBA having 10 years Expeience in Refinery & Chemical Industries Project & Maintenance.

Stractural/ Mechanical Engineering

API 650 & AP1 620, ASME SEC VIII Div. 1&2, ASME B31.1 & 31.3 ,ASTM & NFPA'S

Highly motivated and articulate petroleum engineer. Driven to succeed in all projects Supervised and undertaken, leaving no detail to chance. Engineering is a passion, this is displayed in unwavering ability to be hands-on with every Project.

PDMS Pipe Design using 11.6; 2D Design using Microstation; Able to communicate and work directly with client;

Piping engineer with good knowladge of asme,astm,api code

Mech.Eng.with 4+yrs Exp.in Petrochemical and Fabrication industry

Process Chemical Engineer

Having Over 10 years of experience in Documentation in Oil & Gas Industry using EDMS

A keen analyst with 11 years of experience in QMS Implementation, Testing & Inspection, Inspection Co-ordination, Welding Operations, Audits etc.

Piping &pressure vessel design

Research and Development of Oilfield Equipment

Instrumentation Engineer. EPC experiencied.

I am Mechanical Engineer . Working in Ras Gas Industries Limited,Qatar on Contract basis.i am looking for the long term job with my skill,experience & hard work.

Roustabout,mud/pumpman,floorman and presently as a derrickman.

API 510 Inspector

*Licensed Electronic Engineer *Certified CompTIA Security+ *Certified CompTIA Network+ *Microsoft Certified Professional

knowledge in CHEMICAL ENGINEERING field and to be seen my self as a successful Engineer of (I.I.Ch.E) and wish to have good knowledge application, continual growth and learning prospectus with a reputed organization in near future.

SCADA, DCS, CCMS, BMS, DDC, power, lighting, grounding, ...

I am M.Tech and got 13 years of experience in the field of process automation & controls

Mechanical Field Service Technician

Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.

Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.

I am interested to fulfill one of the geologist position in your company, here in I apply for that slot. I have been working on the several oil companies for more than 15 year experiences to look at some hydrocarbon basin studies throughout Indonesia

Diverse experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management.

Instrument Electrical. Real polyvalent-Electronics: Fire detection/gas detection/communication system and hydraulic systems(crane, wellhead control)

14 year-experience(6 years in Arabic World) in Oil&Gas and Petrochemical Industries as C&I Engineer(Technician).Involved in design, construction, commissioning, startup, shutdown and maintenance of some plants.I worked with great companies – ANSALDO, BROWN & ROOT, SHELL, LUKOIL.

5 Years of Digital DCS Control systems erection ,testing and commissioning experience.

NACE certified corrosion technologist with over 25 years experience in all aspects of the Corrosion Protection field. Extensive field experience. Willing to travel. Interested in contract work.

Presently I am working Bunduq oil company at offshore Abudhabi as a techanicianmechaical

I am well conversant with ANSI/ASME codes and standards as well as software packages CAESAR-II, SPR. I am well versed in conceptual engineering, detail engineering, Piping Stress analysis, Team leading, project planning, Project managements, Project execution techniques and pre-commissioning. I am w

Mud Engineer/Consultant 18yrs experience with all kinds of muds and locations. Hard working

Senior Structural Designer Wide range of experience in Civil/Structural engineering with 10+ years solid background of Structural Design in the Oil Gas industry.Experience from FEED, FEL, to detailed engineering covering offshore and onshore.

DCS DELTA V (Emerson 7.3, 8.3 versions)

Offshore Rig Safety & Training Coordinator.

Drilling high angle & horizontal wells, H2S, perform injection & production completion, well testing. Experienced in directional drilling, dealing w/ anti-collision, etc.

Innovative career in the field of electrical power engineering: Installation, Service and Commissioning

electrician

A total of 6 years of industrial experience which includes 2 years of production & commissioning experience in an Indian Refinery and 4 years of Advanced Process Control experience with Honeywell India & Aspen Tech Middle East.

AN EXPERIENCED BOILER AND PIPELINE DESIGN ENGINEER

EXPERIENCED PETROLEUM ENGINEER and PMP (PROJECT MANAGER), DEEP OFFSHORE, DRILLING, COMPLETIONS, SUBSEA EQUIPMENT AND CONNECTORS

Safety and Risk Researcher

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out