Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #85963 next resume »»
CONTACT INFORMATION:
View contact information...

Degrees/Certificates

1. MBA (General) by distance learning – Heriot-Watt university UK
2. Bachelor of engineering (Mechanical engineering), Madras University, India
3. Ontario Red seal Industrial Mechanic
4. Class 4 stationery engineer, Ontario
5. Vibration Institute (USA) – Level 2 certificate
6. PLC technician course certificate, George Brown college, Toronto.
7. ISO 9001 internal auditor certificate
8. ASQ quality basic certificate

Experience

Jan 2009 – till today – MODEC management systems – Maintenance Superintendent on FPSO Cidade de Rio de Janeiro, offshore Brazil – Maintenance management of topside oil/gas production plant, power generation plant (4 SOLAR gas turbines of each 11MW capacity), HP gas compression plant, marine diesel power plant, offloading systems etc. Using AMOS PMS software for CMMS and stock control.

Feb 2008 – Jan 2009 – MODEC offshore production systems, Singapore – Commissioning manager of FPSO TSJOC offshore Vietnam. Commissioning of topside and marine systems, steam power generation plant (boiler and turbines of total 10 MW capacity), gas compressors and cargo pumps. Preparation of pre-commissioning/commissioning procedures, schedule of mechanical completion and commissioning, resource plan, forming the team and execution of pre-commissioning and commissioning of all plants on shore. Control commissioning documents/dossiers and handover to operation team. Preparation and execution of onshore field tests. Follow company PTW system and ensure safety at workplace.

April 2007 – Jan 2008 – MODEC offshore production systems, Singapore -- Senior project engineer of FPSO Cidade de Niteroi, offshore Brazil, owned and operated by MODEC Management systems. Assigned as topside engineering lead. Lead a team of 6 package engineers, 3 discipline engineers (structural, E&I and piping). Check and approve all engineering documents produced by contractor (L&T Valdel, Bangalore, India). Ensure progress of deliverables as per schedule to production site. Coordinate all engineering issues with production site and vendors of all packages. Organize module 3D review by client and follow up on corrections. Issue MTOs in good time to procure materials by procurements, and coordinate and help clear vendor TQs.

June 2004 – April 2007 – VESTAS Canadian Wind Technology – Site Manager – Manage a site facility of approx. 215 wind turbines, parts inventory of approx. $4 million dollars, 10 work trucks, 22 employees. Prepare annual budgets and obtain approval, keep costs under control, manage customers (owners of wind farms) affairs, monthly reports to head office in Portland OR, participate in continuous improvement process, assist other sites to implement good methods, carry out internal audits in other sites, recruit, train and assess technicians, inventory controller and office manager. Ensure practice of safety at work place, all necessary safety related training and certification for technicians. Implemented a strict inventory control system that resulted in reduction in loss of nearly $200,000.
Reason for leaving – Had to move to Calgary for family. Hence quit the job.

Jun 2002 – Aug 2003 – MODEC LLC, Houston (through agency) – Marine superintendent – FSO Komo Kribi 1, offshore Cameroon, owned and operated by EXXON MOBIL. Assigned with various responsibilities – Check project specification and make necessary corrections for renegotiation of prices, prepare commissioning procedures for marine systems, turn over coordination between construction and commissioning, systems owner for 12 of the marine systems (supervise construction, commissioning and handover), assigned offshore Cameroon to lead offshore commissioning team to clear punch lists on many deck systems, resolve major problems with cargo pumps (large centrifugal pumps) bearings and mechanical seals.
Reason for leaving: One year contract job.

Feb 2000 – Feb 2002 – AUDEX, Singapore, Maintenance services to petrochemical plants – Maintenance manager – Marketing and obtaining service contracts in petrochemical industries, recruit/train and form a team of maintenance technicians, carry out maintenance work in customers plants, provide specialist services such as CMMS implementation, vibration monitoring/troubleshooting/problem solving of rotating machinery, installation supervision, turn-around maintenance, rotating machinery laser alignment etc. Provide on job training to all new employees as per Singapore Govt. MOM rules, ensure safe work practices as per customer safety regulations. Implemented Condition based maintenance system and CMMS in CRODA Singapore. Break downs were reduced almost nil within one year.
Reason for leaving: Company shrinking due to depression and reduction in business.

NOTE:

I have given above my experience in the past decade only, but I have about 3 decades of total work experience -- Marine (19 years), Petrochemical (5 years), offshore (3 years) and wind power (3 years). Following are specific skills worth mentioning:
1. extensive experience in machinery repair, maintenance and problem solving.
2. Implementation of CMMS system, condition based maintenance system.
3. Trouble shooting and problem solving of pumps, small compressors (reciprocating and centrifugal), diesel engines and steam turbines.
4. Project management of small project, such as plant modification, packaged equipment, turn around maintenance, project commissioning etc.
5. operation and management of a small business unit providing service to petrochemical, wind power or marine industries.
------------

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 7037)Go to Search Parameters...
Brief Description
Free! Completion Supervisor for vertical and horizontal wells with 14 years experience
Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.
Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.
Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.
I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position
Experienced Ph.D Reservoir Compositional Simulation Engineer
Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC
I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.
30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.
cfd, thermal, aircraft, turbomachinery
I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .
A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for
A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi
I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc
23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses
As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.
front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic
Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.
Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)
Process Flow Assurance Engineer
Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.
I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.
20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms
Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller
I had a master degree in structural engineering from the University of Southern California.
30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.
Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.
Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer
Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.
Chief structural
Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing
As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.
I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.
Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.
More than 25 years in OIL & GAS Offshore and Onshore Industry.
Senior Geologist - Develoment Geologist - Advisor
Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation
Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.
MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities
Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.
Control System Engineer
Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects
Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.
Mechanical maintenance trainer
I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems
Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design
27 years experience in reservoir engineering, from field operations to pressure testing and simulation.
A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c
SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills
First   [ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com