Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #86065 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATION

08/1994 Doctor of Engineering, Lamar University, Beaumont, Texas.
Field study: Design and Computer simulation of three-phase catalytic reactors.
08/1986 M.E.S., Chemical Engineering, Lamar University, Beaumont, Texas.
Thesis: Computer Prediction of Physical, transport, and thermodynamic properties for organic and inorganic mixtures.
08/1984 BS Chemical Engineering, Lamar University, Beaumont, Texas.

EXPERIENCE

05/2008- Present: Lead Concept/feasibility Engineer. PDO/Shell. Muscat/Oman
Harweel/Rabab PDO Oman: Manage a team of PDO/Shell staff, and engineering contractors to complete conceptual studies on Sour Oil & Gas production facility including oil stabilization and gas sweetening and conditioning and high pressure miscible gas injection. CAPEX $3-4 billion.

07/2005- 05/2008: Lead Process Engineer; PDO/Shell; Muscat Oman
Harweel Phase 2AB project 65,000 BBLD; High pressure (600 bar)/Hi H2S (8%) crude stabilization/ Gas sweetening/Gas injection. Supervising a team of 4/5 PDO engineers to review/approve EPC detailed engineering/Hazop/HSE/Commissioning packages.

05/2002- 05-2005: Subesea System & Flow Assurance Senior Engineer, Shell International Exploration & Production, EP Projects, Houston, Texas, USA

Flow Assurance/Chemical Systems Engineering Lead: Manage/direct steady state, transient, wax, hydrate, scale, corrosion, and chemical system engineering studies/modeling. Define system operating envelopes and functional requirements of the subsea/topside equipments. Develop flow assurance strategies & mitigation/remediation processes (Hydrate, wax, scale, asphaltene, corrosion) for steady state, shutins, startups, commissioning etc. Define topside/subsea chemical systems requirements. Develop operational logic charts, train operators. Involved in many offshore oil and gas projects in GoM, West Africa; South America in water depths of 2000-7000 feet.

Project Completed: Habanero (GoM: 24 mBOPD; 55 MMSCFD); Llano (GoM: 30 mBOPD; 80 MMSCFD); (Llano II, BC-10, offshore Brazil; Bonga offshore Africa; Bujipira & Salema Offshore Brazil)

Production Support for SEPCo (Shell E&P Gulf of Mexico); Develop operation logic charts and manuals. Support well un-loadings. Develop production surveillance strategies. Support and trouble shoot daily operation/planned shutdowns etc. Train operators and develop flow assurance training tools (topside/subsea) surveillance and optimization.

06/2000- 05/2002: Flow Assurance Specialist, Intec Engineering, Houston, Texas, USA
Hydraulic-thermal analysis and flow assurance and operability of deep water gas and oil production and transport systems: Steady state and dynamic Analysis (shut-in, commissioning, depressurization, hydrate mitigation and wax formation, slugging etc.).
Projects:
BP: Mardi Gras Gas and Oil Transportation System: Southern Green and Mississippi Canyons, Gulf of Mexico.
Texaco: Agbami project, West Africa.
British Gas: Burullus Project, Egypt offshore

07/1995- 06/2000 Simulation/Process Engineer; Epcon International Inc.; Houston, Texas, U.S.A.
A. Develop mathematical models and solution algorithms.
B. Engineering Consultation Services.
C. Software Training and Technical Support.

A. Develop, implement and debug mathematical models and solution algorithms for process flow sheets calculations including multi-phase and complex flow and heat transfer, catalytic reactors and kinetics, distillation, phase equilibria, and physical thermodynamic properties. Principal developer of the following Commercial Software Packages:

- SiNet XLC (Vaaler Award 1999) Fluid Flow package for Multi-phase, multi-component, non-isothermal flow in pipelines and networks for distribution and gathering systems for oil, chemical and gas systems. Models include 2-phase gas-liquid, slurry, compressible gas, and liquid phase (Newtonian and non-Newtonian). Includes many of the pipeline equipment such as heat exchangers, control valves, flow meters and pumps may be calculated. Extensive heat transfer model is included. (10000 users worldwide. Selected as corporate hydrodynamic software package by many companies as Shell, Dow, 3M, Eastman, Air Products, Chevron...etc).
- ChemPro Flare, A flare header analysis/design with 1) a extensive database links to handle different relieve cases and contingencies, 2) Relieve Valve sizing program, and 3) Dynamic Fire case analysis program to find the gas vent as function of time.
- REACT, Multi-phase and catalytic reactor design: Models include: Trickle-bed; Slurry-bed; Fixed -bubble beds, 3-phase agitated tanks, 3-phase fluidized beds etc; Models incorporate intra-particle, gas-liquid and liquid-solid mass transfer.

01/1997-2001 Lamar University (Adjunct professor/Researcher)
- Teaching: graduate course in multi-phase kinetics and reactor design and thermodynamics.
- Research: 1) Online process optimization for waste minimization. 2) Multi-phase reactor design and modeling. 3) Heterogeneous catalytic rate parameter-optimization. (Funded By EPA and Gulf Coast Hazardous Substance Research Center, Primary supervisor of 6 graduate students; master degree)

08/1992- 08/1994 Lamar University, Teacher and Research Assistant.

* Computer simulation of 3-phase gas-liquid catalytic reactors. Research was presented at the AICHE Spring 1995 Meeting.
* Teacher assistant for reaction kinetics and reactor design graduate and undergraduate courses.

10/1986-08/1990 Research Assistant, Dept. of Training and Technological Develop. Kuwait University.
* Various researches projects on L-L extraction, UNIFAC method, Expert systems. (Published)
* Trained over 750 students on PC computer languages and applications.

08/1988- 08/1989 Research Assistant, Kuwait Institute for Advanced Scientific Research.
* Simulation of packed absorber columns in the Shuiba refinery.

Simulation Packages PRO/II, Simulation Science ;ChemCad, Chemstation, OLI, OLI Systems; HYSYS, Hyprotech; Aspen Plus V 10, AspenTech; PPDS, NEL; Olga2000, Scanpower; PipeSim, Baker Jardine; PVTSIM, Calsep; Multi-Flash, Infochem.

Computer Languages Visual Basic, FORTRAN, M.S. Access, Visual C++.

Honors and Awards

1999 * Vaaler Award by Chemical Processing Magazine: SiNet XLC (Best Fluid Flow Software, Principle software Developer)
1998 * Professional Engineer, State of Texas.
1997 * Adjunct Assistant Professor, graduate faculty of Lamar University.
1990 * Outstanding Employee, Kuwait University.
1984 * Omega Chi Epsilon, Lamar University Chapter.
1983 * Dean of Engineering Honor List, Lamar University
1981 * Phi Theta Kappa

Publications/Presentations

H. Alboudwarej, M. Muhammad, and A. Shahraki, Schlumberger; S. Dubey and L. Vreenegoor, Shell Global Solutions (US) Inc.; and J. Saleh, Shell International E&P; "Rheology of Heavy-Oil Emulsions" (SPE 97886) 2007
R. Menon; G. Bethke; and J. M. Saleh; "How long have you got; Heat transfer simulation estimates flow line cooldown for SEPCo."; E&P, April 2005.

R. Menon; G. Bethke; and J. M. Saleh; "Field Joint Cooldown Simulation for Hydrate Prevention". EP Journal of Technology, Shell Exploration & Production publication. 2004. EP 2004-7065

J. M. Saleh; "Fluid Flow Handbook", 2002. McGraw-Hill. Book Editor & Author of 12 chapters.

C. L. Yaws, J. M. Saleh, and J. D. Sameth; chapters 46, 47, 48, 49, and 50 in Carl L Yaws: "Matheson Gas Data Book" 7th ed.; Matheson Tri-Gas; Parsippany, New Jersy, 2001

Hopper, J. R., Saleh, J., and Pike, R. W.: Multi-phase and Catalytic Chemical Reactors Design Simulation Tool for Pollution Prevention; Clean Products and Processes, 2001, Vol. 3, issue 2, pp. 92-103.

Hopper, J. R., Saleh, J., and Apte, V.: Determination of Heterogeneous and Homogenous Reaction Rate Constants Using Non-linear Optimization; CACHE, Fall 2001

R. Pike, T. A. Hertwig, J. R. Hopper, C. L. Yaws, J. M. Saleh: "An Advanced System for Pollution Prevention in Chemical Complexes"; AICHE Annual meeting, LA, Ca, 2000.

Saleh, J; and J.R. Hopper: "REACT, The Reactor Flow-Sheet Analysis Program". CACHE, Spring 2000 page 8.

J.R. Hopper, J. M. Saleh, S. Waghchoure, S.C. Hedge, and R. Pike:"Multi-phase and Catalytic Chemical Reactors Design Simulation Tool for Pollution Prevention " Hungarian Journal of Industrial Chemistry. V 28, pp 17-22 (2000)

R. Pike, T. A. Hertwig, J. R. Hopper, C. L. Yaws, J. M. Saleh: "An Advanced Process Analysis System for Improving Chemical and Refinery Processes", 9th European Symposium on Computer Aided Process Engineering, Budapest, Hungary, May 31-June 2, 1999.

Telang, K. S., R. W. Pike, F. C. Knopf, J. R. Hopper, J. Saleh, S. Waghchoure, S. C. Hedge and T. A. Hertwig, "An Advanced Process Analysis System for Improving Chemical and Refinery Processes," Computers and Chemical Engineering, Vol. 23, p. S727-730 (1999).

Hopper, J. R., Saleh, J., Yaws, C. L., Hertwig, T. A., Pike, R. W., Chen, X., and Telang K., " An Advanced Process Analysis System For Pollution Prevention," proceedings of Third International Conference on Foundations of Computer aided Process Operations; Snowbird, Utah, July 5-10, 1998, A.I.Che Sypsosium Series, No.320, Vol.94, pp. 421-427, 1998

Hopper, J.R., Jamal M. Saleh, Sandeep Waghchoure, Sandesh Hedge, Niraj Ramachandran, Ralph W. Pike, "An Advanced Process Analysis System with a Multi-Phase and Catalytic Chemical Reactor Design simulation Tool," presented at PRESS'99 2nd conference on Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction, Budapest, Hungary, May 31- June 2, 1999

"Multi-phase and Catalytic Chemical Reactors Design Simulation Tool", Semana Integral, presented at the Universided Autonoma De Nuevo Leon, Monterry, Mexico, Sept. 29,1998.

"Advanced Process Analysis System for Pollution Prevention", Foundation of Computer Aided Process Operations; Snowbird, Utah; July 5-10, 1998

Saleh, J., and Hopper, R. J.: "Three-phase Catalytic Reactors: An Interactive Simulator". AICHE Spring 1995 meeting, Houston, Texas.

Saleh, J., and A. Qurashi: Prediction of Liquid-Liquid Equilibria of Polar/Nonpolar Organic Species by the UNIFAC Model", Journal of Environmental Sciences & Health, V 7 n 10, 1988.

Saleh, J. and D. Chen: "TTPGL, A Personal Computer-based Transport and Thermodynamic Properties Package for Gases and Liquids", AICHE annual meeting, Florida, Nov. 1986.

Thesis/Dissertations (Supervisor, Lamar University)

August, 1999 "Simulation of Two-Phase Catalytic Fluidized Bed Reactors for Pollution Prevention"
M.E.S.

August, 1999 "Simulation for Pollution Prevention: Gas-Liquid Reactors and Sulfuric Acid Alkylation Process"; M.E.S.

August, 2000 Application of Synphony (process synthesis) for Pollution Prevention- Allyl Chloride Process. M.E.S,

August 2000 Application of Synphony (process synthesis) for Pollution Prevention- Acrylonitrile Process. M.E.S.

December 2000 Parameter-Optimization of Heterogeneous Catalytic Reaction Rate Equations. M.E.S.

August 2001 Computer Simulation of Bio-Reactors, M.E.S

View contact information...
«« previous resume next resume »»
Search Results (Resumes 101 to 150 of 7040)Go to Search Parameters...
Brief Description
MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.
Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.
I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.
Well-developed interpersonal skills.
Senior Process and flow assurance engineer with full project cycle experience.
I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary
Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5
I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model
Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.
Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..
Free! I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.
Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway
Drilling exploration production, per cv below
B.E. (Mechanical) - 1980
Petroleum Engineer with 26 years of professional experience mostly in Production Engineering. Spanish and English fluent speaker. Artificial lift, workover and well service recommendations. Well Completion programs. Well testing. Field Evaluation and Production Optimization.
30 + year mud engineer, experienced in all phases of drilling fluids & BOP.
I have more than 17 years experience in exploration and development domains. During my career, I have explored for hydrocarbon in the Algeria sedimentary basins. North Sea Norwegian sector, Libya and now I`m working in Canada for Fugro-jason.
23 YEARS EXPERIENCE IN PETROCHEMICALS -PROJECT , OPERATIONS ,ERECTION ,COMMISSIONING
Seasoned and versatile process engineer (Oil & Gas, Refining) seeking a Process Engineering position that utilizes my analytical and communication skills to enhance organizational growth and profitability.
Project management, Coordination with End User/ Vendors/Contractors/Consultants, Progress monitoring& reporting, Supervision, Quality/Safety assurance and Tender documents
Professional API 510 and AWS CWI Inspector
With thirty years experience in the workforce in industries such as oil & gas, mining, fabrication/construction, and marine engineering, I have a very strong mechanical aptitude in all disciplines and a strong commitment for OHSE having started with my apprenticeship as a Mechanical fitter/1st class
Petrophysicist
Over 15 years of experience in Instrumentation Engineering, Procurement, Construction, pre-Commissioning and commissioning of projects
Highly skilled and experienced Sr. Drilling Engineer, experience with land/offshore (including deepwater), having worked as Drlg Engineer through Drilling Engineering Supervisor for a large scale GoM deepwater developement project.
20 years experience in drilling/work
Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP
Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering
B.E.(Mechanical); 22 Years total Industry Experience; Served with SABIC, Reliance, SPIC & Shell;
More than twenty (20) years experience in the field of Engineering Construction in
A professional, well-qualified MECHANICAL ENGINEER with extensive project management experience in the oil refining, gas, LNG/LPG, petrochemical and associated industries.
Senior Plant Inspection Engineer. Mechanical engineering graduate with 29 years of experience in Oil/ Petrochemical industries loking after Process Plant Inspection, Materials Inspection, NDT, Corrosion, Failure Analysis, Fabrication/ Welding inspection in running plants + new grass root projects.
Geologist, Heavy Oil and Oilsands. Experienced consultant, prospect generator, horizontal well planner for thermal and CHOPS applications.
I have 22 Years of experience in the Detailed Design and Engineering in the areas of Plant Design & Piping for Oil & Gas, Petrochemical, Chemical and Power Projects. I am presently working as a Head Piping.
With 20years O&G experience, my main experience has been on major projects during design. I have experience within Operations, Construction and Commissioning and also worked on site; offshore, pipeline construction and FPSO shipyard construction. I have Australian and British Citizenship.
Dedicated professional in Exploration and Production with 27 years experience working for the two largest major Oil Services Companies. Strong engineering background in Drilling and Completion Fluids as well as Drilling Waste Management through years of focused operational management.. Strong engi
Drafter & Designer experience in estimation and designing of transmission lines and poles. Facilitated department meetings for administration of projects. Have worked the industry for twenty-five years and have obtained a Bachelors of Science degree in, Business Administration. Ability to prioritize
Profile: A Specialist Seismic Interpreter with over 15 years experience in Oil & Gas exploration, in seismic interpretation and prospect generation. Having the ability to supervise seismic processing and acquisition activities and take on role as a Project Manager. Confident in ability to cont
Working with Transocean as a Drilling Manager in Integrated services Project started for 5 Jack up rig for Bombay High field with client -ONGC. Operation commence in Jan 2007.
Drilling Engineer offshore tender rigs jackups onshore land rigs
process engineer
a senior instrument & Controls engineer
Sr Piping Designer Oil & Gas 3D model
Senior Planner with more than 20 years experience in Oil & Petrocehmical Industries
Qualified professional Project Manager and licensed US chemical engineer, with 32 years oil and gas and refined products production and processing facilities, pipelines, stations and terminals.
Piping Engineer/Designer
Presently working as Drilling Manager with Transocean started up the project in India for 5 Jackup rig for ONGC along with Tony Flynn who was than our GM -Integrated services in May 2006. Direct responsibility is managing T12 and JTA ( 300' Jackup)on day to day coordination, planning and execution
AutoCAD drafting, Drawing, Painting (Acrylic, Oil, Water Color), Airbrushing, Faux Finishing, Murals, and Computer Graphics /Illustrations. Software: Adobe Illustrator, Adobe Photoshop, Adobe Streamline, Adobe 3D, Flash, Fractal Painter, Quark Xpress, Microsoft Word, Power Point and various scanning
Instrumentation, Control and Safety Systems Design Engineering - Projects
A Professional Engineer with over 18 years' experiences in Process Control Systems for the design, development & implementation of process control applications, oil storage, movement & blending applications and process training simulations. Extensive knowledge in Honeywell Distributed Control System
First   1   2   [ 3 ]   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com