Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #86073 next resume »»
CONTACT INFORMATION:
View contact information...

Desired employment / Occupational field Completion supervisor for offshore and onshore operations

Work experience
September 2007 to June 2009

Work-over and Completion supervisor- Service Leader

Issuing and following-up of well programs, executing, supervision and reporting for work-over jobs as well for rig-less and WO rig (acting as a CM). Performing completion jobs for new wells drilled with drilling rigs and preparing EOWR (End of Well report). Installation of completion for Oil producers (ESP or eruptive mode) and Water Injector wells. Performing and reporting all tests needed for hand-over the well to Production. As major project was a work-over campaign for activation of 16 wells.
All concerning preparation, performing and leading of well-servicing activity (including interactivity with services and logistic companies).
SPIE, Pau- France for TOTAL Yemen

October 2000 to September 2007
Sand Control / Completion Specialist ¨C SVC Leader-Completions
Involved in the on-shore preparation and responsible for the off-shore installation of Sand Control
BHA¡¯s and Production Strings on Deepwater wells, Sand Control Completion types, Frac Packs,
Single Trip, Perf Pack. Production Strings.
Conducting several projects for various clients including: Naoc (Agip), Shell, Conoil, Total, Nexen, etc
Emblematic for this period was the Amenam project ( prepared and completed since the first till the last well ¨Cabout 50wells)
Halliburton Company

Jan 2002 to April 2002
Sand Control / Completion Specialist
Participated for FAT in order to homologate new tools at PES Pau in France.
Halliburton Company

March 2000 - June 2000
Sand Control / Completion Specialist
Involved in the on-shore preparation of Sand Control BHAs¡¯ and Production Strings for Calpurnia off shore sand-control project in Italy.
Halliburton Company

1998 - 1999
Sand Control/Completion -Field and workshop toolman, consultant
Worked with Halliburton Company concerning cementing jobs in the Republic of Moldova, and sand-control jobs for Petrobel Egypt, in Mediterranean Sea, as a tool-operator for Karous and Darphill projects.
Halliburton Company

1995 - 1998
Completion/Sand control Service Specialist
Since 1995 to 1998 I have participated as a consultant with Halliburton Company to perform sand-control jobs in a large number of oil and gas wells, for Petrom and Romgaz in Romania.

In 1996 I have participated with ENTERPRISE OIL EXPLORATION from Scotland, to design and perform a DST offshore job in Bulgaria.
PETROS ( ICOTS)

1992 - 1995
Head of Tester Department
Involved in all testing (DST) operations
PETROS ( ICOTS)

1984 - 1992
Operator, oil field supervisor and Technical Advisor
Run and ensure technical assistance for DST jobs in drilling and production wells both on-shore and off-shore ( Black Sea).
I have experience testing operations at very high depth (over 7000m) both in open-hole and in casing.
I have, also participated for experimental operations for drill string freeing with tester equipment.
ICOTS

1982 - 1984
Employee with ICOTS
Cementing, Special Operations and Transports Enterprise
Performed cementing jobs in very deep oil and gas wells.
Cementing plugs and squeeze cementing jobs, fracturing and acidizing jobs, sand control jobs.
ICOTS

1972 - 1976
"Mihai Viteazul" HighSchool- Ploiesti

1976 - 1977
Reserve officer of Romanian Army with Lieutenant degree
Military status
Romanian Army

1978 - 1982
Petroleum Diplomat Engineer
Oil Well Drilling and Producing of Oil and Gas Field graduated from Oil Well Drilling and Producing of Oil and Gas Field Faculty, Oil and Gas University Ploiesti, Romania

Petroleum Engineer

1999 - 1999
TCP Cross Training Course
(TCP1, TCP2, Loading)
TCP Cross Training Course -Montrose, Scotland, UK

2001 - 2001
Sand Control School
Sand Control School- New Iberia, USA

2003 - 2003
Completion I course-training
Completion I course-training, Montrose, Scotland, UK

2004 - 2004
Completion II course-training
Completion II course-training, Montrose, Scotland, UK

2007 - 2007
Subsurface Safety valves
Subsurface Safety valves, Montrose, Scotland, U.K

2008

Certificate IWCF-Drilling

Course-training, Oil and Gas University Ploiesti, Romania

2008

Certificate RSES

Course-training, Pau, France

2009

Defensive driving

Course-training Kharir, Yemen

Romanian

Understanding Speaking Writing
Listening Reading Spoken interaction Spoken production
C2 Proficient user C2 Proficient user C1 Proficient user C1 Proficient user C1 Proficient user
C1 Proficient user C1 Proficient user C1 Proficient user B2 Independent user A2 Basic User
A2 Basic User A2 Basic User A1 Basic User A1 Basic User A1 Basic User
(*) Common European Framework of Reference (CEF) level

Resourceful and good team worker
Well administration of human resources and material financial values

Analysis and synthesize spirit
Capacity of taking decisions

Performed casing cementing jobs in very deep oil wells.
Cementing plugs and squeeze cementing jobs, fracturing and acidizing Sand control jobs (pumping, blender, filtration, etc)
Designed and performed testing operations at very high depth both in open-hole and casing. Designed and performed experimental operations for drill string freeing with tester equipment (DST)
Sand control tools and completion products: preparation / installation
FAT to homologate new tools

MS Office -Word, Power Point, Excel
Internet, Adobe Reader, Adobe Photoshop

General mechanics, hydraulics, electronics since 1976

References available upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 7037)Go to Search Parameters...
Brief Description
Free! Completion Supervisor for vertical and horizontal wells with 14 years experience
Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.
Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.
Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.
I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position
Experienced Ph.D Reservoir Compositional Simulation Engineer
Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC
I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.
30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.
cfd, thermal, aircraft, turbomachinery
I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .
A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for
A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi
I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc
23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses
As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.
front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic
Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.
Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)
Process Flow Assurance Engineer
Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.
I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.
20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms
Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller
I had a master degree in structural engineering from the University of Southern California.
30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.
Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.
Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer
Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.
Chief structural
Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing
As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.
I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.
Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.
More than 25 years in OIL & GAS Offshore and Onshore Industry.
Senior Geologist - Develoment Geologist - Advisor
Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation
Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.
MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities
Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.
Control System Engineer
Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects
Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.
Mechanical maintenance trainer
I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems
Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design
27 years experience in reservoir engineering, from field operations to pressure testing and simulation.
A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c
SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills
First   [ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com