Resume - I have experience with rotating equipment such as turbine, compressors, motorrs,...

Misco Jobs

Resume #86276

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

To secure a challenging position in an organization that would allow me to use my extensive experience in operations, maintenance, and troubleshooting for maximum plant availability.

EDUCATION:

1982-1988 Polytechnic Institute of Belarus former USSR.
Electro-Mechanical Engineering & Master of Science in Power Plants.
WORK EXPERIENCE:
2008-Present. GE Energy, Mechanical field Engineer. Installation and repair of rotating equipment also repair mechanical drive steam turbine, hydro-generator, turbine-runner, gearbox, compressor and fans. Electromechanical Engineer to provide leadership and technical support of activities for the power generation plants within the region as needed regarding technical issues. Some of the responsibilities include to participate and/or lead teams that focus on specific problem areas or needs for generating units, to initiate/participate in continuous improvement planning and implementation in assigned area of responsibility, to coordinate activities with Vendors/Contractors, to perform field inspections and take field measurements, to analyze technical performance of plant systems and equipment, to perform root cause analysis of system and equipment problems, to develop and evaluate alternative solutions to engineering problems, prepare studies/scope statements outlining alternative solutions, and recommend least cost solutions, etc. Responsible for both phases of the projects - tendering and construction. Responsible for developing detailed specifications for the main process equipment (boiler, turbine, air-cooled condenser, fuel handling). In charge of developing datasheets and specification for mechanical balance of plant equipment (pumps, tanks, heat exchangers, de-mineralized water, compressed air, etc…). Responsible for the preparation of the request for proposal for mechanical equipment, request for proposal for mechanical contractor, selection and follow up with suppliers and the mechanical contractor. Responsible for interfacing with the civil, electrical and Landscape engineers on support requirements.

2006-2008. Advanced Drainage Systems, Inc- Logan Twp. NJ. Plant Services Engineer: Installation and maintenance of Heavy equipments, Corrugators, extruders and downstream equipment for plastic manufacturing of HD-polyethylene PIPES for drainage. Also installation of new facilities at nationwide and international.

2000-2006 Linc Facility Services – FEDEX, Newark International AIRPORT, NJ
Maintenance Engineer: Duties included, coordinating and directing the 52 maintenance CREW and repair of all equipment including conveyors, lifts, instrumentation and controls, Pumps, blowers, boilers and compressors. Implements preventative maintenance programs, evaluating potential new equipment for purchase, manage the parts and supply inventory. Ensure all related maintenance records are accurate and current. Supervisor the activities of 52 assigned maintenance personnel, and keep management informed of all activities.

1996-2000 Waste Management – Elizabeth, NJ
Foreman: Duties included Supervising and hands-on maintaining and troubleshooting of conveyor sorting system, hydraulic system, welding machine, etc.

1992-1996 Automated Recycling Technologies – Newark, NJ
Maintenance Supervisor: Duties included, creating a predictive and preventive maintenance program for the conveyor system. Shift scheduling, repairing and maintenance of conveyors, blowers, shakers, hydraulic system, and welding.

1990-1992 Dominican oil Refinery
Electromechanical Engineer: Duties included Engineering and supervision of installation and start-up activities of work on-site. Support and coordinates construction interface activities in accordance with Management Plan.

1988-1990 Dominican Power and Light Corp. – Dominican Republic
Project Engineer: Duties included, Engineering and Construction, including directing and coordinating multiple disciplines from incepting of engineering through start-up, testing of equipment, site and equipment layout, technical design review, process engineering, instrument and control systems, vendor equipment selection and negotiation, troubleshooting and problem resolution, coordination of installation activities. Supervision and start-up activities, employee training, documentation and executive reporting.

ACHIEVEMENT: Low Pressure Boiler License (Black Seal)
I hold a TWIC card.

COMMUNICATION SKILLS:

Speak English, Russian and Spanish fluently.

REFERENCES:

Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 7051)

Go to Search Parameters...

Brief Description

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

PDS Frameworks, Autocad, Microstation

Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer

Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Management and supervisory skills

I am a Senior Petroleum Engineer Technologist with over 20 years oil and gas experience. My diverse background provides a comprehensive knowledge of all aspects within the petroleum industry.

Departmental development and management of process, staff and workflow integration into corporate operations.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

DSV with over 20 years experience.

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

Experienced Materials Metallurgical Engineer seeking a position in research and development facility. Has experience with fuel cells technologies, fuel reforming materials and processes, automotive industry, hydrogen related technologies, engine mechanical design.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Project Engineer with Australian education, canadian experience and with very good project management skills.

Pipeline, Facilities and Project Engineer.

More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations

Good working experience on Instrument and control system

Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National

8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,

QA/QC Enginner

Reliability, Maintenance, Planning and Material Engineer- Mechanical

More than 15+ years experience in process operation

Telecom field technicians Customer end

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out