Resume - Highly Qualified Draughtsman

Misco Jobs

Resume #86339

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To be employed in a company that will utilize my educational background and work experience. To help achieve the goal of the company which is business profitability. This also includes promotion of health and safety activities/practices among teammate.

EXPERIENCE
2005 - 2009 National Drilling Co. Abu Dhabi, UAE
Draughtsman
ƒÞ Work under supervision of an engineer in the creation and implementation of engineering design drawings in all areas of engineering disciplines (marine, structural, mechanical, piping, or electrical).
ƒÞ Frequently Travel to NDC Rig (both offshore & onshore rigs), shipyard or fabrication workshop under supervision of a divisional engineer for purposes of surveying rig or equipment, CAD support of a project in terms of issuing a proposal drawing, fabrication drawing as well as as-built drawings, or inspection of construction or design implementation.
ƒÞ Produce 3D drawings and/or views.
ƒÞ Keep Engineering, Projects and Maintenance Division, aware of progress and deadlines.
ƒÞ Work with outside reproduction companies in reproduction of required copies from CAD files.
ƒÞ Provide CAD electronic files in a readable format to others outside the engineering division, specifically for the 3rd party job orders.
ƒÞ Import and export files between CAD and Microsoft Office programs or other programs supported by the company.
ƒÞ Hard copies of support documentation for engineering or other departments as requested.
ƒÞ File electronic CAD drawings on the engineering server within divisionall requirements.
ƒÞ Estimate hours required to produce drawings and prepare drawing lists of project work.
ƒÞ Shop Drawings for Structural and Piping (Modification and repair) including schematic-single line piping system for every Periodic Major Maintenance for NDC offshore rigs (Mud system, Fire Fighting System, Hull structural repairs and modification, HVAC System, Fuel Oil System, Bilge system, Lube and Dirty Oil system, Deck Drainage System, Compressed Air system, Bulk Mud and Cement System, Exhaust System, Vent and Sounding System and other related Offshore Rig Drilling System.
ƒÞ Scan and convert old manual drawings to electronic files for updates and file management in the Engineering server.
ƒÞ Prepare correction drawings as owner done by 3rd party (engineering disciplines) for the RIAP (Rig Integrity Assurance Program) similar to total rig refurbish and to extend rig's life operation to another 10 to 20 years.
ƒÞ Shop Drawings for different kind of Workshops (Ex. Mechanical & Electrical Workshops) Skid Type, Store Room, Water Tanks, Deisel Tanks, Cages, Ladders, Cable Boom, Fly Camps.
ƒÞ Erection and Assembly drawings for Drilling Equipment since most of the Equipment is very old and not up to date manuals for installation.
ƒÞ Schematic Diagram for Electrical and Instrumentation specially for the Newly Built by NDC (locally Assembly).
ƒÞ Design Administration Building inside the NDC Base Camp, Buhasa.
ƒÞ Monitor and updates the Basecamp Facilities Site Development.
ƒÞ Design the Proposed Caterpillar and Welding Workshop.
ƒÞ Design the Proposed New Central Warehouse inside the Base Camp.
ƒÞ Design the segregation of the On-shore and Off-shore Tubular yard with a new Sattelite Office.
2003- 2005 Metaphil Inc. Mandaue City, Cebu, Phils.
Sub-Contractor For CAD works (Structural & Mechanical)
ƒÞ Prepare Shop drawings for Structural Steel Platform, Pipe Rack & misc. drawings.
ƒÞ Prepare Bill of materials.
ƒÞ Prepare Details for anchor bolt setting plan.
ƒÞ Prepare Details for Structural steel columns & beams.
ƒÞ Prepare Standard details for connection:
-Column to Beam connections
-Beam to Beam connections
ƒÞ Prepare alternative designs for renovation projects.
ƒÞ Prepare steelworks arrangement & details.
1999-2003 Gen. Dir. for Military Works Riyadh, KSA
CAD System operator / CAD Operator
ƒÞ Build & Set-up Microstation Triforma Dataset
ƒÞ Troubleshooting (limited - peripheral including scanner and plotter and users related: IPLOT, Microstation and file transfer between Unix and NT, display driver installation...etc.)
ƒÞ Backup / Archive and Restore Engineering CAD Files.
ƒÞ Software Loading (Microstation, IPLOT, IRAS and other microstation related software)
ƒÞ Microstation (Colored presentation, Arabic)
ƒÞ Rasterizing / Vectorizing Old Manual Drawings.
ƒÞ NFM Data Migration assistance and AIM data entry.
ƒÞ Projectwise File Management
ƒÞ Importing / Exporting Autocad format to Microstation format
ƒÞ Microstation Triforma Dataset Setup and Management.
ƒÞ Drafts Architectural Floor Plans, Enlarged Plans, Sections, Building elevations & Details using Microstation ver. 4, 5,SE & J.
ƒÞ Drafts Electrical Lighting & Power Layout Plans, Single line Diagram & tables, & misc. details using Microstation ver. 4, 5, SE & J.
ƒÞ Drafts Three Dimensional Drawings (Perspective).

1998-1998 Kinden Philippines Cebu, Phils.
CAD Operator (Electrical)
ƒÞ Drafts Electrical Lighting & Power Layout Plans, Single line Diagram & Electrical schedules & misc. details using Autocad rel.14.
ƒÞ Drafts As-built Drawings.
1996-1998 ISLA Communication Cebu, Phils.
CAD Operator
ƒÞ Drafts Telephone Standards & method of installation, layout design telephone cable line (city mapping) & equipment using Autocad rel.12 & 14.
ƒÞ Digitized Maps using Cablecad software.
1996-1996 Metaphil Inc. Mandaue City, Cebu, Phils.
CAD Operator
ƒÞ Drafts Structural, Mechanical & Electrical using Autocad rel.12, 13 & 14.
ƒÞ Prepare bill of materials.
ƒÞ Prepare Details for anchor bolt setting plan.
ƒÞ Prepare Details for Structural steel columns & beams.
ƒÞ Prepare Standard details for connection:
-Column to Beam connections
-Beam to Beam connections
1995-1996 Phil. Nat. Oil Company Leyte, Phils.
Draftsman (On-job-Training)
ƒÞ Drafts (Civil) Roads plan & profile, cross section, box culvert, Lined drainage & Structural Layout such as pipe support-pedestal, boiler & separator foundation.
ƒÞ Drafts Mechanical Piping Layout & straight line diagram.

EDUCATION
1992-1996 Leyte Institute of Technology Leyte, Phils.
ƒÞ BS in Industrial Technolgy
ƒÞ Major in Industrial Drafting

TRAININGS
ƒÞ Autocad 12, 13, 14, 2000, 2002, 2006 & 2009
ƒÞ Microstation ver.4, 5, 95, SE, J & V8
ƒÞ Microstation Triforma
ƒÞ Projectwise (Bentley Data Mngt.) Administrator & Users tratining
ƒÞ CAD Standard & Procedures
ƒÞ AIM (Asset & Info. Managemnet) Data Migration
ƒÞ NFM (Network File Managemnet) Data Migration
ƒÞ Scanning, Rasterizing & Vectorizing
ƒÞ Windows NT / Windows 2000 & XP
ƒÞ MS Office
ƒÞ Steel Classification & Welding Procedure
ƒÞ OffShore Survival
ƒÞ Basic Fire Fighting
ƒÞ H2S (Hydrogen Sulphide) & BA
ƒÞ ADCO Defensive Driving Course

PERSONAL
Nationality: Filipino
Sex: Male
Civil Status: Married

REFERENCE:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 7009)

Go to Search Parameters...

Brief Description

28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.

Electrical Technician with 20 years experience in the oil and gas industry.

A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.

To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Highly Qualified Draughtsman

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

M.Sc with 15 years Laboratory experience in Analytical Lab.

Electrical Engineer

Piping Engineer (PDMS)

PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman

I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory

Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)

Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.

Piping design and checking:Cadworx, Bentley 3D, Autoplant

Piping Designer - Mechanical / Piping.

G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

20+ years in offshore engineering; including marine, structural, pipeline, and project engineering

About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.

Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis

Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc

Senior Rotating Engineer

A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.

I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT

I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys

Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.

Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.

PhD Petroleum Engineer (Production Technologist)

M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.

Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.

25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation

TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks

Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.

More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.

More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

Applying for RTG Crane Operator Rigger And Dog Man Position Willing to relocate

I have 18 years of experience in the activities with respect to Oil and Gas Construction projects as a PIPING FOREMAN

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out