Resume - Stress Analysis of critical lines connected to static as well as rotating equipm...

Misco Jobs

Resume #86376

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Post Graduate Diploma in Piping Technology.
Institute – Vishvakarma Institute of Technology Pune, India in Year 2003 with First class (61%).

Bachelor of Chemical Engineering.
Institute – All India Shree Shivaji Institute of Engineering Pune, India in Year 2002 with First class (60.33%).
University –University of Pune, India

Diploma in Chemical Engineering.
Institute – Government Polytechnic, Jalna, Maharashtra, India in Year 1999 with First class (71.12 %)
Board of Technical Education, Maharashatra, India.

OBJECTIVE:
------------
To build a professional career with a respectable organization that allows ample opportunities for learning and career growth in the area of 'Piping Design & Chemical Engineering'

WORK EXPERIENCE:
------------
- M/S BECHTEL (INDIA) PVT LTD. –Gurgaon, India (June 2008 to May2009)
Position Hold –Engineer (Stress)
a) Current Project-Ruwais Refinery Expansion Project- FEED, (client- M/S Takreer) Abu Dhabi, U.A.E.
Job Responsibilities: In charge of following activities since Nov. 2008
* identification of 'stress critical lines' based of project specification.
* for rack and slipper lines-deciding anchor bay locations & expansion loop nesting.
* preliminary stress analysis of major stress critical lines like flare lines, steam lines, lines connected to tanks.

b) Project: Yarwun-II Alumina Refinery. Gladstone, Australia (client- M/S Rio Tinto)
Job Responsibilities for Hydrate Classification Area
* 'stress analysis' of critical lines connected to static as well as rotating equipments.
* support selection from support standards for critical and non-critical lines.
* preparation of specification for 'Rubber Expansion Joints'
* identification of stress critical lines based of project specification.

B) PREVIOUS JOBS
1) M/ S TOYO ENGINEERING (I.) LTD., Mumbai, India. (Aug 2006-May 2008)
Position Held- Assistant Engineer
Project: Shell ECC-Pulau Ulhar, Singapore) (Client- M/S Shell)
Job Responsibilities
* stress analysis of lines connected to rotary & static equipments like pumps, compressors, reactors and exchangers, column, pressure vessels,
* stress analysis of lines connected to cold-box and co-ordination with vendor.
* preparation of piping stress analysis packages by using P&IDs & line lists.
* preparation of data sheets for 'Spring Hangers'
* loop sizing and deciding anchor locations for rack lines.
* preparation of vessel clip information.
* Flange leakage check, trunion calculations
* co-ordination with the other engineering disciplines.
* preparation of support load data and passing the same to civil engg. discipline

2) M/S SNC LAVALIN (I) LTD., Mumbai, India. Nov. 2005 –July2006)
Position Held- Trainee Engineer (Stress)
a) Project: M/s Rabigh Refining and Petrochemical Company (Client- M/S
Sumitomo –Aramco- Kingdom of Saudi Arabia)
Job Responsibilities
* line modeling in CAESAR II,
* equipment modeling in CAESAR II
* loop sizing and deciding anchor locations for rack lines.
* spring & support selection.
* checking loads & stresses on equipment nozzles.
* preparation of piping stress analysis packages by using P&IDs & line lists.
* stress analysis of pump piping by using API 610 nozzle loads.
* stress analysis of columns, heat exchangers & pressure vessels by using vendor allowable nozzle loads.

Project: Reliance Flue Gas Duct- Jamnagar, India (Client- M/S Reliance
Petroleum Ltd.)
* line modeling in CAESAR II
* preparation of support load data and passing the same to civil engg. discipline
* preparation of data sheets for 'Spring Hangers'
* spring & support selection.
* calculation of duct expansion at expansion joint.
* co-ordination with the client and other engineering disciplines

3) M/S ND ENGINEERING SERVICES, Mumbai, India (Jan.2005-Oct. 2005)
Position Held- Junior piping stress analysis engineer
ND Engineering Services, a major piping stress analysis contractor, working for Kvaerner Power gas India Ltd & Petrofac International
Job Responsibilities
* line modeling in CAESAR II by using piping isometrics, P&IDs, line lists &
piping specifications.
* stress analysis & support selection.
* preparation of piping stress analysis packages by using P&IDs & line lists.

4) INNOVASSYNTH TECHNLOGIES INDIA LTD., Mumbai, India (July 2003
– Dec 2004)
Position Held- Production Officer
Job responsibility includes supervision and planning of production activities.
INNVASYNTH TECHNLOGIES INDIA LTD is a customer synthesis unit of FUTURA Polyesters in collaboration with AUSTIN Pharma (US)

ADDITIONAL INFORMATION:
------------
Date of Birth: 5th Sept 1979
Passport No.: E5562816 valid upto July 2013
Nationality: Indian
Languages known: English, Hindi and Marathi

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 7051)

Go to Search Parameters...

Brief Description

On line analyzer & Field Instruments Installation & commissioning Experience, DCS & PLC maintenance level experience

B.Tech from IITK, 6 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

A Logging Analyst in the Syrian Petroleum Company. A Petrophysicist in Al Furat Petroleum Company, responsible for many fields for all petrophysical operations and formation evaluations. Petrophysics section head, Wireline logging, perforation and core analysis contract holder.

Extensive Wonderware software experience including Industrial Application Server and System Platform products. Expert industrial PC skills. Extensive experience with Microsoft Virtual Server and Terminal Server products.

I have involved in petrochemical, oil/gas, and heavy industrial projects. I have strong academic achievements, excellent interpersonal skills, and positive attitude, Commitment and desire to perform engineering design. I am also exceptionally well organized and highly motivated and able to pull toge

To obtain a challenging position in your organization where my technical and management skills can be effectively honed and utilized and to gain practical experience in the realm of Civil/Structural Engineering.

Over Eight years of multidisciplinary Civil Engineering experience

Instrumentation & Maintenance industrial Engineer

Substation primary design engineer for high voltage substation

DEEE with 4 years Triconex Knowledge

I had passed bachelors degree in safety and fire engineering.Passed NEBOSH international certificate in occupational Safety and health.

I have 13 years in piping design and drafting field for Oil and gas industry

I possess hands on experience in developing EMS (ISO 14001) and OHSMS (OHSAS 18001) procedures in line with International best practices, performing HSE audits, leading EIA and Risk Assessment study teams, assisting in development of emergency response / contingency plans e.t.c,

Vast experience of planning, Management reporting, Refinery Economics,Vast experience in Petroleum Refining. Confident and result-oriented, Able to analyze and apply problem solving and decision-making techniques to achieve desired objectives within target deadlines.

16+ years experience HVAC Engineer with intension to work in Oil and Gas field

Sr. Projejct Document Controller-Exp of 12 years in Oil & Gas/Power Project Industry

Thirteen (13) years of extensive and diversified experience in managing and leading variety of upstream Oil & Gas handling, Chemical & Petrochemical Projects.

About 16 yrs of experience in the field of Civil Engineering Design, Construction & Inspection and Document Control for turn over (Piping Test Packages, Punch list & etc) & dbase management using MS Access program.

Electrical Intrument & Control System

Lead Mechanical Engineer, 17 years of experience in preparation of Specification/ Material Requisition/ Proposal/ Scope of Work; Design Basis and calculations, Technical & Cost Evaluation; Vendor Drawing Review, Static, Rotating and Material Handling Equipment and Mechanical Packages

Senior Piping Designer with 20+ years experience. AutoCAD, AutoPlant, Excel, Access, Word, Outlook.

Wireline supervisor or wireline consultant

Geoscientist with experience of working in a multidisciplinary team in a major E and P company. Experienced in Seismic modelling and Interpretation, and reservoir modelling. Holds an M.Sc in Petroleum Geoscience.

Process Engineer with over 11 years oil and gas engineering background. Design experience of Liquefied Natural Gas import terminals and process simulation experience of base load liquefaction trains.

Structural engineer with over 14 years experience in EPC projects (grass root and revamp) in refineries, petrochemical plants, spinning mill, cement plant & other industrial units.

OBJECTIVE: To utilize my experience in manufacturing and construction. Using various software programs, and engineering disciplines, (24,000hrs) Of AUTOCAD experience.

More than 14 years process & project engineer experience in Oil & Gas and Oil Refinery.

CAREER OBJECTIVE A suitable, challenging, and rewarding position in Petroleum Engineering.

Working Experiences as Senior Process Engineer from 1992 - 2003 in LNG/ LPG Plant of PT. Badak NGL in Bontang East Kalimantan Indonesia. I have been working for PT. Badak NGL over 20 years. Previous Job experienced in PT. Badak as Senior Production Planning Engineer from 1983 - 1991.

ERP Consultant (functional and technical) : MFG-PRO and Progress, Axapta, Movex, SAP Software Development Project Manager : Visual Basic, Oracle, Access, SQL-Server

I have multilingual skills and am fluent at Russian, Turkish and good atdrilling

Proactive and skilled professional with a solid supervisory background and experience developed on projects in Venezuela

Good Capability and ability to get goal the project with safety, quality, planning and costing

Using FEM packages (COSMOS, ALGOR) to analyze structures and components (Stress, Stiffness, Fatigue, etc). Document drafting and review (Calculations, P&IDs, MITPs, etc.).

More than 23 years experience as Sr. rotating techn/foreman in the refinery, responsible for the repair, troubleshooting, modification, preventive and predictive maint. of all rotating equipt.; ensure safety, planning, scheduling of personnels, preparations of tools and spare parts.

Stress Analysis of critical lines connected to static as well as rotating equipments like exchangers, columns, reactors, pumps, compressors. Super high pressure steam lines, lines connected to ‘cold box’ (Cryogenic lines), and expansion loop sizing for rack lines, analysis of pressure safety valves

A highly experienced MBA professional with exceptional interpersonal and communication skills and an external extensive background in the following broad-based competencies: Procurement/Supply Chain Management Strategic Planning; Contract Negotiation; Business Development

Wire line logging: done a special six months course on wire line loggingIn which I Have studied all the logs their specifications, uses, tools, interpretation etc, like gamma ray, sp log sonic log, neutron porosity logResistivity & conductivity log, density &photo electric factor log etc.

Crude oil storage tank construction experience as per API 650/653

i am looking for dimensional survey engineer job. i have complite Diploma in Marine & Offshore Technology.i have been work for Keppel fels Shipyard 3yers. Dyna-Mac shipyard 1.5years. now working for Norce offshore in Indonesia for DLB Projct.

I Mr. Noel C. Atienza 12 almost 12 years experience in oil and gas as a senior mechanical technician, including as a machinery supervisor. I'm permanent residence in singapore

a great job seeker of electrical field

Pipeline Integrity Engineer / Project Engineer / Design Engineer

Technical Assistant to Reservoir/Production/Petroleum Engineering.

BSc Chemical Engineer Having Six Year experience in Petrochemical Industry

Currently working in SNC LAVALIN ENGG INDIA LTD. Mumbai and deputed to SNC LAVALIN EUROPE B.V. BRANCH to Shaybah, saudi arabia as a PDS ADMINISTRATOR. My job profile is related to Piping Engineering and PDS(PLANT DESIGN SOFTWARE),RIS (Relational Interface

Controls and Instrumentation Engineer / ESD-Triconex & DeltaV SIS/ 6+year Exp

Provide structural engineering, construction management, real estate due diligence and expert witness services.

Innovative Professional with 26 years of progressive experience in engineering design, maintenance planning and management, including 16 years in the Oil/Gas industry.

Over 18 years experience in construction, installation and mechanical assemblies, heavy

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out