Resume - Sr. piping design

Misco Jobs

Resume #86437

CONTACT INFORMATION:
View contact information...

EDUCATION:
Titusville High School, Titusville. Fl.
Major: Drafting

West Coast Drafting School, Fullerton, Ca.
Major: Structural design, 1973.

AutoCAD 2007
Softdesk Auto-Architect
Compucad

SPECIAL QUALIFICATIONS: AutoCAD 3D
Microstation V8
Softdesk Auto-Architect
Piping systems design, survey & Iso's
P & ID survey verification & layout
Facilities/Industrial design & survey
Electrical & power distribution layout & survey
Civil/Structural design drafting & survey

SECURITY: TWIC (Transportation Worker Identification Credential)

EXPERIENCE:

JACOBS ENGINEERING / MARTINEZ, CA.
LEAD PIPING DESIGNER: CONTRACT: Field survey and design of 27 small and medium piping system upgrades at the Tesoro refinery. Refinery wide flare relief system isometrics survey and update to facilitate engineering safety study. Assigned and coordinated design projects among the piping group and prepared same for submittal to document control for issuing to client. (2008)

CLARK ENGINEERING CONSTRUCTION / VENTURA, CA.
PIPING DESIGNER: TEMP: Developed offshore platform piping isometric drawings for spool fabrication in an engineering/pipe shop fabrication environment. (2007)

AMEC ENGINEERING @ PROCTER & GAMBLE / OXNARD, CA.
PIPING DESIGNER: CONTRACT: Survey paper mill and paper machine piping systems and update corresponding P & ID's, including logic diagram references. Organized and prioritized plant P & ID verification and update project in coordination with project managers/engineers at Amec as well as P&G. Also brought
P & ID's up to ISA standards. Was involved in various piping and mechanical engineering projects. (2006-07)

CARTER BURGESS / LOS ANGELES, CA.
PIPING DESIGNER: CONTRACT: Site survey and design of steam supply and condensate return systems for use at Nutro food processing facility. Design and layout of various piping systems for a new cogeneration plant located in Victorville, Ca. (2005-06)

BECHTEL NEVADA / LAS VEGAS, NV.
PIPING/MECHANICAL DESIGNER: CONTRACT: Layout and design of domestic water and fire water systems including, water storage tanks, booster pump stations, fire mains, and transmission piping. Assisted in the layout development of communication equipment and cabling. (2005)

TECHNIFEX INC. / VALENCIA, CA.
PIPING DESIGNER: CONTRACT: Design of pump assemblies, water treatment and associated piping design for water fountain effects display project in China. (2004)

BECHTEL NEVADA / LAS VEGAS, NV.
PIPING/MECHANICAL DESIGNER: CONTRACT: As-built survey of the Nevada Test Site's domestic water system including wells, water storage tanks, booster pump stations, and transmission piping. Survey and design of HVAC and fire protection/alarm systems for counter terrorism mock-up building. Performed survey and design of domestic water backflow prevention device installations. (2003)

LOCKHEED MARTIN / SANTA MARIA, CA.
DRAFTER: CONTRACT: Developed drawing layouts of electronics cabinets, interconnection diagrams, cabling diagrams and details for support of missile launches at Cape Canaveral and Vandenberg. (2002)

RAYTHEON Co. ESD / GOLETA, CA.
FACILITIES DESIGNER: CONTRACT: Facilities survey, design, & layout of architecture, electrical & lighting systems, critical electrical backup systems, and building systems using AutoCad. Also, modest to extensive remodeling of office space systems, research & development labs, and manufacturing facilities layouts. (2002)

IRWIN INDUSTRIES / VENTURA, CA.
PIPING AND STRUCTURAL DESIGNER: TEMP: Surveyed, designed, and detailed piping system layouts for offshore platforms and municipal water district. Produced drawings for same (bill of materials, shop fabrication spools and system iso's). Also, structural steel surveying, design, and detailing for offshore and industrial applications. (2001-02)

SO. CAL. GAS CO. / LOS ANGELES, CA.
PIPING DESIGNER: CONTRACT: Developed demolition plans for the entire removal of a remote dehydration plant at station 14 in Goleta, Ca. Also assisted the project manager with plant modernization project acting in the capacity of design and material checker and advisor. Acting designer and design consultant on assorted small projects including jacket water, fuel gas, and lube oil cooling system modification studies. (2001)

SO. CAL. GAS CO. / LOS ANGELES, CA.
PIPING DESIGNER: CONTRACT: Performed "as built" walk down (survey) of piping design plans & P & ID's for the Honor Rancho gas injection and storage plant in Valencia, Ca. (2001)

DERKSEN DESIGN, INC. / VENTURA, CA.
MECHANICAL DESIGNER: Developed HVAC design plans, piping design plans, isometric drawings, and p & id's as well as job site surveying. Clients included UCLA Medical Center, Future Media corp., Baxter pharmaceutical, and Aera oil producers. (1999-2001)

RAYTHEON Co. ESD / GOLETA, CA.
FACILITIES DESIGNER: Facilities survey, design, & layout of architecture, electrical & lighting system, critical electrical backup systems, and building systems using AutoCad 2d & 3d graphics software. Modest to extensive remodeling of office space systems, research & development labs, computer mainframe facilities, hazardous waste handling & storage facilities and manufacturing facilities layouts.
(1988-99)

LEVER BROS. INC. / LOS ANGELES, CA.
DESIGNER: CONTRACT: Facilities survey, design & layout of production and packaging equipment, conveyor systems, dust collection systems, safety systems, and utilities for powder, liquid and bar soap production. (1987)

FOWLER ENGINEERING / LOS ALAMITOS, CA.
CONTRACT: Cooling tower basin filtration systems design & layout, installation and operation manual technical writing. Developed chiller by-pass piping design and layout. (1986)

VILLAGE ELECTRICAL CO. / BELLFLOWER, CA.
CONTRACT: Electrical layout for office space, firehouse, and parking facilities. (1986)

McALPINE & SALYER INC. / PARAMOUNT, CA.
CONTRACT: Structural layouts, sections & details for "Butler" building construction bid packages, including filling station and firehouse design. (1986)

HUNT WESSON FOODS, INC. / FULLERTON, CA.
CONTRACT: Field check and design drafting for facilities maintenance departments' building remodel projects (floor plans, reflected ceiling plans and power distribution) and parking lot layouts. (1985)

HUNT WESSON FOODS, INC. / FULLERTON, CA.
CONTRACT: Field check, machinery arrangement and piping design of the Wesson oil bleach optimization process at the Fullerton, Ca. refinery. Involved in machinery arrangement and layout for "Peter Pan" peanut butter plant at Sylvester, Ga. facility. (1984-1985)

IMODCO INTERNATIONAL INC. / LOS ANGELES, CA.
SENIOR PIPING DESIGNER: Modified existing piping system diagrams and design drawings for the conversion of a cargo oil tanker to a permanently moored offshore crude oil storage vessel. (1983)

TODD SHIPYARD / SEATTLE, WA.
SENIOR PIPING DESIGNER: CONTRACT: Redesigned bilge/ballast system for the conversion of a logistic-fast ship to a heavy weapons and helo transport ship for the US Navy. (1982)

SEAHAB CORPORATION / LONG BEACH, CA.
SENIOR PIPING DESIGNER: CONTRACT: Ship checked, designed, and checked a/c condensate drain and fire extinguishing systems for the USS New Jersey at the Long Beach Naval shipyard. (1982)

PENNINGTON MANUFACTURING / OXNARD, CA.
STRUCTURAL DESIGN DRAFTSMAN: CONTRACT: Offshore platform structural modifications and additions. Pipe support design and detailing. (1981-82)

SANTA FE ENGINEERING / ORANGE, CA.
SENIOR PIPING DESIGNER: CONTRACT: Piping systems design for jack-up drill rigs, drill barges and work over barges. (1980-81)

E & L ENGINEERING / LONG BEACH, CA.
SENIOR PIPING DESIGNER: CONTRACT: Redesigned the tank and transfer pump piping to accommodate high pour crude oil at the Union oil refinery in Wilmington, Ca. (1979-80)

SANTA FE ENGINEERING / ORANGE, CA.
SENIOR PIPING DESIGNER: CONTRACT: Designed piping system layouts for offshore platforms. Produced isometric drawings for same, (spools and system iso's) and assisted in pig launcher pipe radius studies. (1979)

LAWRENCE-ALLISON & ASSOC. / SANTA ANA, CA.
CIVIL/STRUCTURAL AND PIPING DESIGN DRAFTSMAN: Responsible for the layout of topographic, site grading, foundation location and details (equipment and buildings), structural steel and details, p & id's and piping drawings for compressor stations and gas processing plant projects. (1977-79)

COAST MARINE / LONG BEACH, CA.
SENIOR PIPING DRAFTSMAN: Correspond with naval shipyard personnel to produce efficient, dependable shipboard piping system drawings. (1976)

M. ROSENBLATT & SONS, INC. / SAN FRANCISCO, CA.
SENIOR PIPING DRAFTSMAN: Shipcheck, design, develop and submit shipboard piping drawings for installation and modifications to ships. Check and mark-up blueprints of ships' piping drawings for corrections needed. Consult with pertaining groups (structural, electrical, etc.) concerning new locations of equipment to obtain highest efficiency of systems involved. (1976)

DESIGNERS & PLANNERS INC. / SAN PEDRO, CA.
PIPING DRAFTSMAN: Corrected design interference's concerning piping, ventilation, machinery and structures aboard 25,000 and 35,000 deadweight ton cargo oil tankers utilizing shipcheck, design and drafting knowledge. Incorporated revision notices into various piping system drawings. Assisted in the design and drafting of entire cargo oil tank heating piping system for the 35,000 dwt tankers. Also gave guidance and advice to fellow draftsman to accomplish all of the above. (1974-76)

DANIEL, MANN, JOHNSON AND MENDENHALL / LONG BEACH, CA.
PIPING DRAFTSMAN: Researched, shipchecked developed and submitted shipboard piping drawings to Long Beach Naval Shipyard for installation of modifications to ships' systems. Also performed weight and moment calculations. (1973-74)

WEST COAST DRAFTING / FULLERTON, CA.
STRUCTURAL DRAFTSMAN: Developed structural layouts, ran prints and attended classes concerning structural design: (classes held by employer). (1973)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 6995)

Go to Search Parameters...

Brief Description

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

Reservoir Engineer

PDMS Instrumentation Designer

Well experienced in the field of Mechanical maintenace of rotating equipments like compressors, pumps,turbines in Petrochemical and Oil & Gas Industry in India and Middle East. Worked with Shell affiliate NOCIL in India, Reliance India and Sabic, KSA as Mech.Technician & Supervisor.

QA/QC Engineer in onshore oil field with ASNT Level -II in UT RT PT MT . M.TECH and B.TECH in Mechanical Engineering.B.TE

Electricial technician now i am working in mask oil qatar

PDS(2.5Years),SmartPlant,Navisworks,MicrostationV7.1(3Years),AutoCad2006(5 years),MS-Office

Skill: 11 Years Structural designer ( Including 2 Y rs. in PDMS , 2 Yrs. in PDS & Micro-Station ,3 Yrs. in X-Steel , 4 Yrs. Auto-Cad ) Qualification: B.E Production Engineering - First class – April 2009 – MIT Anna University, Diploma in Mechanical Engineering – First class - April 1998.

I start my profession life from Techno Agriculture when I done Agriculture machinery repairing. After that I went to Saudi Oger and work on Hydraulic

Total 7+ years of experience in Refinery, Petro chemical, Power Plants (steel & RCC structures) and Industrial Buildings.

Project Engineer with filed experience in Marine industry, oil & gas and renewable energy industry

A qualified mechanical engineer having a litany of professional courses with 11+ years of extensive track record in heading key engineering divisions and technical operations/maintenance, across diverse geographical locations in the Oil & Gas industry, seeking a managerial/engineering position with

Rock physics / Petrophysics

“Petroleum and Gases” University Ploiesti, Romania

Over 6 years of experience in analysis and design of steel and concrete structures

15 Years Geospatial Experience. Oil/Gas, Pipeline Design/Engineering, Land Management, Geospatial RDMS

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Registered Professional Engineer in Ontario, Canada, Mechanical Engineer BSc. & M.Eng.

Project Management and General Management Professional

Project /construction director/manager FPFO, Jacket and decks, Modules, loading terminals (shallow and deep water)

Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.

Sr. piping design

Professional Civil Engineer with over 11 years of experience in the oil and gas industry focused in the analysis and design of different types of structures, such as frameworks, pipe racks, bridge trusses, operation platforms, vertical tanks supports and their foundation, and retaining walls.

A geologist with experience in the oil industry involving exploration and development projects in Guatemala South Peten basin, geological information database management, mud logging in oil drilling activities, oil tanks gauging(1996-2004). Logging geologist in USA (Nov 2005-Mar 2009)

Experienced and motivated Ph.D mechanical Engineer

Oilfield Experience 34 years. 33 years with Well Services. I began my career as Well services Technician and my last jobs with Well Services as a Team Leader responsible for Slick Line operation in both Gas and Oil wells.

Civil engineer/pipeline precommissioning

multi-disciplined autocad designer

Performing work as per international standards following operational excellence management system

Extensive 20+ year’s professional experience in instrumentation, control and automation for Oil, Gas and Petrochemical industries.

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

Experienced Drilling and DHS Supervisor

M.Tech Geo-Engineering, 9 years of proven industry experience in Geology, GIS, RS, Image processing, QA & Testing, Performance Engineering on Financial, Accounting, CRM, ERP, Retail, B2C Web & Client Server applications like ESRI arcGIS, ERDAS, MapInfo, AutoCAD, Java, J2EE & .Net, Data Warehousing

Perform all oil and gas estings, envirmental testings, wwtp testing, utility relating testing, chemical preprations, well testings, auxlery fireman, first aider, isorelating working, hse relating working, master in chemistry,

Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioning, Commissioning

12 Years of Experience in Oil & Gas, Industrial & Construction Safety (HSE Training)

I am senior Information management engineer with 12 years experience in the Petroleum and IT industries. I have a Bachelor of Mathematic / Information technology

I have been working as an executive engineer(inspection) in chittagong urea fertilizer ltd. since 2nd april,1997 to till date.I have to supervise all on-stream and shutdown inspection activities of different vessels,tanks,pipe lines etc to ensure plant integrity &reliability .

Electrical Engineer, Planner

cartography_gis_mapping_drafting

110KV/11KV substation equipments like Isolators, Circuit Breakers, Current transformers, Potential transformer, Lightning arresters, Neutral Grounding Resisters & Battery charger, etc.

Chemical engineer OCP MCAD

I am a civil engineer who has been working in the middle east for the past sixteen years. With a total of eighteen years of professional working experience, of which thirteen years were in the oil/gas and petrochemical projects construction as a civil construction engineer, civil QA/QC engineer.

QHSE Specialist

- seeking reservoir engineering consulting work - 19 years in oil and gas industry - reservoir modeling - well test analysis - petrophysics - production optimization - development planning

QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out