Resume - Petroleum Engineer with 13 years experience in the Oil and Gas Industry with sol...

Misco Jobs

Resume #86483

CONTACT INFORMATION:
View contact information...

Education

* Environmental Management Certificate
University of Calgary, Alberta, Canada (2006-In Pro.)

* Environmental Inspection in the Oil Industry Diploma
Universidad de los Andes, Colombia (1994)

* Bachelor of Science in Petroleum Engineering
Universidad Industrial de Santander, Colombia (1993)

Work Experiences

Petroleum-Geomechanics Engineer 2007-2009
Halliburton Co.- Houston

* Geopressure analysis and engineering support for PEMEX–Reynosa.
* Set up the First Real Time Monitoring Center for Drilling and Geomechanics operations to control wellbore stability using Predict, Geostress, Compass and Wellplan software for Saudi Aramco–S.A. It reduced 15 % wellbore stability problems in the first year.
* Geomechanics analysis for a VCDSE-PEMEX-Ciudad del Carmen and OVENG field- DEA-161, BP-Africa.
* Initial Set up of the first Real Time Monitoring Center in Halliburton-Houston focus on Geomechanics to support drilling activities in GOM.
* Monthly Real Time operational reports Saudi-Aramco and Geomechanicis reports and presentations Pemex-Mexico

Measurement While Drilling (MWD) Field Engineer 2006-2007
Ryan Energy- Alberta, BC and Saskatchewan

* Set up and programmed MWD tool string according to drilling engineering plan for Encana, Nexen and Canadian Natural Resources and others.
* Determined and predicted KOP angle and identified high pressure zones in problem wells.
* Reach targets according to schedule and budget for the company and the operator companies.
* Compiled final MWD project reports (PD-292 Encana, Ensign 121, kinwest)

Emissions Monitoring/ Lab Analyst Engineer 2003 – 2006
MAXXAM Analytics – Alberta and BC, Canada

* Determined and measured air pollution in sources (SO2, CO, CO2, NOX) in refineries (TransCanada, Suncor and others).
* Air departments achieved 41% revenue comparing to the year before.
* Analyzed and measured trace metals (Na, Cl, and others) using ICP/MS Spectrometers and execute lab tests to soil and water samples: BTEX, TEH, CCME, OGG and metals.
* Used LIMS software in determination of Boron, total mineral and others.

Reservoir Lab Specialist
AGAT Laboratories – Calgary, AB 2002 – 2003
* Conducted capillary pressure measurements using porous plate for evaluation of reservoir hydrocarbon saturation for Pemex and Encana
* Determined formation resistivity parameters, measured on reservoir core samples.
* Relative permeability parameters, measured at full reservoir conditions of pressure and temperature to predict recoverable reserves.

Drilling- Environmental Engineer
AUDITORIA AMBIENTAL– Colombia 1995– 2000

* Drilling engineer assistant for PETROBRAS Oil Co in Rio Ceibas field.
* Realized Environmental Audits for ARGOSY ENERGY INTERNATIONAL in seismic, drilling, and production in Linda, Toroyaco and Mary Fields.
* Implemented de-Salinity programs for salt-water mud in drilling.
* Prepared drilling programs and drilling permit applications for the wells Petrobras-Colombia

Petroleum - Environmental Engineer
GEOAMBIENTAL LTDA. - Colombia 1993 – 1994

* Monitored gas injection programs for Los Mangos and Rio Ceibas fields to maintain and increase reservoir pressure – Petrobras Colombia.
* Conducted lab test to determine water and soil qualities. Rio Ceibas field – Petrobras Colombia.

Softwares
* Predict, Geostress and Presage (2007) KSI-Halliburton Inc.
* Compass and Wellplan (2008) KSI- Halliburton Inc.
* WinMirp,TFO, QMWDPC, qMWDCnfg and Qw32Server (2006) Ryan Energy.
* STARTLIM (2003)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 6998)

Go to Search Parameters...

Brief Description

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.

To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Highly Qualified Draughtsman

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

M.Sc with 15 years Laboratory experience in Analytical Lab.

Electrical Engineer

Piping Engineer (PDMS)

PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman

I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory

Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)

Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.

Piping design and checking:Cadworx, Bentley 3D, Autoplant

Piping Designer - Mechanical / Piping.

G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

20+ years in offshore engineering; including marine, structural, pipeline, and project engineering

About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.

Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis

Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc

Senior Rotating Engineer

A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.

I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT

I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys

Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.

Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.

PhD Petroleum Engineer (Production Technologist)

M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.

Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.

25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation

TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks

Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.

More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.

More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

I have 18 years of experience in the activities with respect to Oil and Gas Construction projects as a PIPING FOREMAN

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.

Involved in commissioning and pre-commissioning activities.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out