Resume - DCS, PLC, Automation Specialist

Misco Jobs

Resume #86580

CONTACT INFORMATION:
View contact information...

B.Sc. in Electrical Engineering --- Over ten years experience in the oil and gas industry. Experienced in Gas Turbo-compressor's Control Systems, Oil production facilities, and DCS (Delta-V and Yokogawa). Experience with Siemens, GE Mark V and Allen Bradley PLCs.
APEGGA: Engineer in training, Membership No: M98278

EDUCATION
1992-1997 B.Sc. in Electrical Engineering Shiraz University of
Electronic Industry, Shiraz, Iran
EXPERIENCE

Control Specialist
April 2009-June 2009 TARPON Energy services company, Calgary, Alberta
* Prepared HMI for DCS system with Yokogawa Centum VP, for different oil production facilities in Middle East.
* Responsible for FAT test of Allen Bradley PLCs and DCS control systems.
* Worked experience with industrial communications.
* Worked experience with Wonderware and YOKOGAWA CENTUM VP software.
Instrument and Control Engineer
2003-2008 NIGC, National Iranian Gas Company, Shiraz, Iran
* Developed PLC's logic programming and troubleshooting strategies for Speedtronics Mark5, Siemens step7, CCC control module (Compressor Control Cooperation), DCS and HMI software.
* Responsible for fault finding of turbo compressor control systems, DCS, SIS, ESD and F&G systems.
* Conducted site inspection coordinating with the contractors. Supervised and trained the instrument technicians and journeymen involved in site maintenance.
* Designed timetables for preventive repairs and developed repair methods to increase the efficiency of the system.
* Procured instrument spare parts for control systems.
* Member of supervisory team for installation, test, loop checking and commissioning.

Junior Engineer in Industrial and Control Technology Training

2001-2003 Ministry of Labor and Technical Training, Shiraz, Iran

* Wrote and modified training standards. Liaised with and advised senior management of 30 satellite training centers to ensure that the quality of training delivered met government-specified standards.
* Developed and facilitated industrial training such as Instrument and Control, IT, Computer Hardware, Industrial Electricity and Industrial Electronics.
Hardware & Network Engineer
2000-2001 Chakavak Engineering Company
* Designed and implemented different computer LAN networks for more than 30 transportation companies. Provided solutions for problem solving of electrical and electronic apparatus like modems, UPS and communication channels. Troubleshot computer hardware issues.
Communication Engineer
1998-2000 Military Service in Iranian Army

COMPUTER APPLICATIONS
* Proficient in Microstation, VMWare, HMI.
PROFESSIONAL DEVELOPMENT
2009 Engineering & Technology Upgrading Program, CCIS, Calgary
* MS Office Suite 2003
* Business Communication
* AutoCAD 2009—SAIT
* Project management
2008 PLC Allen-Bradley Controllogix RSLogix 5000
Delta V DCS
* SAIT Polytechnic, Calgary, AB
2007 Network+, WinXp, WinServer2003 Certificate
* Shiraz South Industrial University, Shiraz, Iran
2003 Instrument and Control system Training
* Oil University, Isfahan, Iran

REFERENCES
* Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 7054)

Go to Search Parameters...

Brief Description

Maint Planning, Materials management, warehouse, plant maint, turnaround, project

Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation

Reservoir/Geoscience Technician

Completion/Workover Supervisor

Oil and gas production, well testing, gas lift wells performance, Gas lifting optimization and automation, Gas sweetening efficiency, improve chemical injection to better water separation and minimize the consumables, giving training of local operators and engineers. Operation and production techno

I am a Chemical Engineer having 10 yrs of valuable experience in various areas of petroleum refining including unit operation, Revamp jobs, Process engineering, Process Modification, PFD/P&ID review, HAZOP study, Safety review, troubleshooting, Advance Process Control, Simulation Studies

Mechanical Supervisor/technician

Mechanical Commissioning/Start-Up &Generation advisor engineer

An Electrical Engineer having 10+ years of experience in Petroleum & Petrochemical Plants

DCS, PLC, Automation Specialist

Instrumentation ICSS commissioning specialist

Sr. Designer with Autocad,Microstation, PDMS,AutoPlant, SmartPlant

14 years in Details engineering, Control system, Construction, Operation and Maintenance works of Electrical and Instrumentation in EPC projects Oil & Gas, Hydrocarbon, Petrochemical, Refineries

Sr. Java developer

Have B.Sc. degree (2:1 upper division) in Geology, and 11.5 years (1998 – 2009) working experience with Shell E&P (Netherlands and Nigeria) as senior Geologist and subsurface team leader. Very skilled in static modelling using Petrel, HCIIP volumetric computations, Field development planning

Senior Piping Designer/Field Coordinator/PDMS and PDS Designer

General Analysis of Petrochemical, raw materials, process, products, customer complaint. Expert in several Lab instruments as AAS, ICPS, ICS, DSC, HPLC, GC, etc.

31 Yrs. Of Experience i Rotating Equipment Maitenance /Conditio Monitoring

I have high energy level and eager to learn new skills ,I am very organized person and in my entire job I have organized my activity and other people activity.I can take responsibilities ,I am a customer focused and I have always met my deadlines.

Solid experience in Project Management and Project Control of Oil and Gas Projects.

■ Quality-driven professional with over 25 years of experience■ Verifiable track record for successful completion of projects in EUROPA ,SOUTH- AFRICA.RUSSIA and QATAR. ■ Business oriented; able to understand and execute broad corporate policy. ■ Implementatio

Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes.

I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const

I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3).

NACE 3 Senior Coatings & Insulation Inspector

Chemical Engineer with 12 years of experience

Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic

Quality Assurance/Control * Inspection & Project Engineering * Welding * NDT * Coating * Fabrication * Construction * Offshore and Onshore Gas / Oil / Gas Plants*Jackets / Topsides / Well sites / Pipelines / Piping / Structural / Pressure Vessels / Tanks /

Telecom Engineer transmission speciality more than 16 years experience

18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years

Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures.

Ph.D. materials engineer with 23 years of R&D experience in: a) Program management; b) Measurement of material properties Test method development and fixture design; c) Polymers, composites and their processing; d) Laboratory supervision and management of technical personnel.

A Professional Mechanical Engineer with nearly 13 years of experience in project as well as maintenance field in Power and Petrochemical industries, to seek a performance oriented and challenging career in the Industry.

A highly competent and hard working Instrumentation & Control Systems Engineer

Over 12.5 years experience in process piping design. In Design equipment arrangements and piping layouts, isometric and GAD piping drawings with using engineering 3d and 2d software. My other activates such as material take-offs, checking, and supervising the piping personnel as in team.

AWS,CSWIP with 16 years of experience

Sales Engineer

I 19 year experince in instrumentation.

Education : 1).M.Tech (Mech) 2) B.E (Mech) Software Skills:- CAESAR – II 4.5 & 5.0, PDMS Review & PDS / Intergraph Smart Plant Review (SPR) and Piping Stress Engineer + 7 Years of Experience

10+ years of experience in Piping Design, detail engineering, PDS, Estimation& tendering.

A dedicated, hard working and objective driven Reservoir Manager with more than Ten year diversified experience in Upstream E & P Sector.

Drilling Engineer with 7 years of experience

PABX SERVICE ENGINEER

Production Engineer with 12 years of industry experience

Having Experience in Construction of all Types of building. Industrial Substation, foundation, Water Treatment Plant ,Tank foundation, Pipe rack foundation, Infrastr

25+ Years Experience Prepared P&IDs, equipment arrangements, piping layout drawings, system and fabrication isometrics, and as-built drawings. Provided field construction support services including: QA/QC for mechanical systems, trouble shooting and correcting mechanical/piping conflicts.

Senior Drilling Engineer with over 10 years of experience in both international and domestic arenas of drilling, completions, and workover operations with dual citizenship in Canada and Brazil. Excellent cross-cultural communication skills with language abilities in Portuguese, French, some Bahasa

Process/P&ID Designer with Smartplant PID experience

Senior Vessel Designer

Good in design of pressure vessels and storage tanks, Cathodic protection, Corrosion monitoring and control of pipelines; Installation/maintenance of gas turbines; Excellent in facility management, inventory, warehouse and logistics management; Good in preventive and corrective maintenance

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out