Resume - I am qualified Degree chemical Engineer from the reputed Maharaja Sayaji Rao U...

Misco Jobs

Resume #86587

CONTACT INFORMATION:
View contact information...

LOOKING FOR: Job in Refinery, Petrochemical, Oil & gas field

APPLIED FOR: For the Post of" start-up & commissioning engineer"

HOW DO I MATCH?
* I am qualified Degree chemical Engineer from the reputed Maharaja Sayaji Rao Uni, Vadodara
* Over 17 Years of Rich Experience in Refinery & oil & gas Onshore plant, off-sites, utilities & tank ages

* I am working with Samsung Engineering Co ltd at Seoul,SouthKorea for Documentations work for NHT & CCR PLATFOMER COMPLEX of PETROTRIN POINTE-A-PIERRE REFINERY now presently at Trinidad and Tobago, South U. S.A. for commissioning of same plant

* I Worked with Japan Gas corporations Middle East FZE co for Dolphin Onshore facilities project ( Ras-laffan, Doha, Qatar) for Construction, commissioning & starts-up from May-06 to Nov-07
* I had worked with M/S cairn energy-offshore-onshore at surat,India. ADNOC Takreer (Abu Dhabi) forSulphur recovery commissioning,
Panipat refinery India for the Naphtha Hydrotreater (Tank-farm)

* I have good experience to write up procedure for commissioning, dry-out Lube of flushing etc…. and Prepare Turn over Package including check list points for internal inspections, pump start up, compressors start up etc..

* Office documentations like prepare meeting agenda, minute of meeting, work planning etc.. and performing that in the field for all activities,150Bar leak test, Gas Turbine(Rolls- Royce's)Steam Turbine (Siemens),NHT RX & stripper column chemical cleaning & their start up, Compressors(Dresser-Rand) soda Boil-out, Lube-oil flushing, Furnace Dry-out startup, and commissioning

* I was involved in start up, shutdown and handling of emergencies & Moc-drill several times successfully giving full regards to safe work practices.
* knowledge for preparations of HAZOP & OTP reports
CAREER OBJECTIVE: To pursue a challenging career and achieve new Heights in the task assigned to me. To work in an environment where Performance is rewarded with new responsibilities

QUALIFICATIONS: DEGREE CHEMICALENGINEERING
Maharaja Sayajirao University of Vadodara-1989

PROFESSIONAL EXPERIENCE: 17 years

On shore commissioning experience - Dolphin Energy Project Raslaffan-qatar
- Cairn Energy-Laxmi Platform surat-India

NHT-CCR & Refinery Experience - Petrotrin Refinery Project at T&T,South U.S.A.
-Panipat Refineries Project, IOCL-India

Sulphur recovery - ADNOC Refineries, Abu-Dhabi,(UAE)

Pipeline network of approx -Takreer, Abu-Dhabi,(UAE)
700 km for inter refinery
NHT & CCR PLATFOMER COMPLEX
PETROTRIN REFINERY at Trinidad & Tobago, South U.S.A.
Process Licenser; UOP (Capacity-28000 BPSD)
Work as commissioning engr (Through Samsung Engineering Co Ltd.) for Documentations and commissioning procedure write up at Seoul South. Korea. (up to Nov-08) After that mobilized to site at Trinidad & Tobago.
Job Responsibility:
* I have good experience to write up procedure for commissioning Furnace Dry-out,
Soda-Boil out, Lube of flushing of Compressors etc….
* Prepare Turn over Package including check list points for internal inspections of Vessels, Tanks, Reactor, pump start up, compressors start up etc..
* Office documentations like prepare Method of statement, Job hazard analysis Meeting agenda, Minute of meeting, Plan and Up date commissioning activity,work planning etc..
* Performing commissioning activities as steam blowing with noise control silencer (80 db), Flushing package, Tightness test pack etc…
* Internal inspections of UOP Plat former Reactor. And Pre-com of Cont Catalyst Regenerations Complex, Packinox Ex, Thermax Heater for U.O.P Plat former Reactor,& NHT Reactor. Stripper column, Stabilizer column, Fin fan cooler etc…

DOLPHIN ENERGY LTD at RasLafan QATAR
Natural Gas On-Shore: (Off-site,Utilites &Process plants)
Working as commissioning engr (Through Japan Gas Co Ltd.)
May- 2006 to Nov 2007 Plant capacity ; 2600MMSCFD
Job Responsibility
* Prepare Operational Test Procedure & Pre start up- activity,
* flushing plan preparations,Degreesing of Amine stripper, Absorber etc.
* High pressure leak test 110 bar, Inertisation, Hydro carbon charging etc.
* Furnace Dry-out Soda-boil out of HRSG, Lube oil flushing, commissioning activity for start-up turbine, Hazop report, Emergency trips, start up-shut down &related activities

Equipment Commissioned.
* Air compressor (6720 NM3/HRX3 KOBALCO Three stage
* Centrifugal gas Compressor (Two stage centrifugal,30/130 bar Dresser-Rand)
* Gas Turbine Rolls-Royces,
* High pressure fuel gas compressors is pressure-60 bar- Supplier - Man Turbo
* 223Tons/Hr HHP Steam at 43Bar &385 c temp (vendor-Mechhi-ITLY
* Nitrogen plant, Sea water, potable water plant, Metheniser,Propeniser, Buteniser, Etheniser, Mercury Guards, propane recycle etc

ADNOC-TAKREER (Abu-Dhabi)(From-Dec-07 to March-08
(Cross-country pipeline Project through DODSAL)
Dodsal 400 million USD, EPC project to connect existing refineries and product storage terminals (tank farms) with major distribution centres in Abu Dhabi.
Equipment commissioned:
* Tank farms, multistage / multi-product / large volume pumping systems &pipeline net automated and controlled through DCS / SCADA.
Job Responsibility;
* Preparations of commissioning procedure, Process calculations for procurement of chemical required during commissioning,Participte in process walk through, safety walk through etc
Sulphur recovery-(lincensor-ortloff engineer's ltd) at TAKREER (Abu-Dhabi)
Equipment Commissioned.
* Claus Reactor-Thermal& catalytic conversion of H2S 90%conversation
* Cold bed Adsorptions: sub dew pt conversations Adsorber99%recovery

Cairn Energy (Laxmi Onshore Platform, Surat.). (Oct-2003 –March-2005)
Methane (CH4) gas rich man plate form capacity 150 MMSFD gas
Equipment Commissioned:
* Glycol regenerations
* Screw comprs / centrifugal comprs
* off gas comprs (two stage single acting -10 to 60 bar)
* Booster Gas Compressors.

Indian Oil Corporation Limited (Sept 2005 to May-2006)
Offsite, & Tank ages, xylene (NHT-CCR), at Panipat refinery
The capacity of Panipat refinery is 09 MMTPA,
Working as a commissioning engineer in SRU, NHT-CCR Tank ages.& Off-site
Job Responsibility
* Review of the plant Pfd's and P& ID's and equipment data sheet.
* Check listing of piping, tank& equipment (on process & safety related point) etc and release format accordingly, follow up for liquidate
* Check point as per plant specific operating manuals and standard procedure operating manuals.

GPL Polybutene unit (Ranoli)
Iso Butene Purifications from C4 stream and Polymerizations
Process Equipment & Job Responsibility
* Hydrogenations in plug flow reactor pressure 22.5-23.0 kg\cm2
* Hydrogen Compressor (Double Stage double Acting Reciprocating
* Maintenance of column, Simulations of past operating parameter and result, after that conclude for enhance yield, troubleshooting, etc

INDIAN PETROCHEMICALS CORPORATION LTD.ACN Plant (Solid Waste) Inclinator
Process Equipment & Job Responsibility
* Rotary Furnace: Temp.1200 to 1250oC
* Caustic scrubber, Effulent Treatment plant. Venture scrubber (L.Andersons-2000)
In-charge of plant. Developments, implementations and optimizations of chemicals process. Able to carry out economics/technical evaluations on technical matters.

NAME OF ORGANIZATATIONS PERIOD POSITION
PETROTRIN REFINERY at Trinidad and Tobago, South U.S.A. (Through Samsung Engineering Co ltd. At Seoul, South Korea May-08 continue Commissioning engr
Abu Dhabi National Oil Corporation. &Takreer(U.A.E.) Through Dodsal Dec-2007 to March-o9 Shift in charge
DOLPHIN ENERGY LTD, QATAR
Through Japan Gas Corporporation May-2006 ToNov-2007 commissioning engr
Indian Oil Corporations Ltd panipat MAY-2005 ToMar-2006 Commissioning engr
Abu Dhabi National Oil Corporation.(U.A.E.) March-2005to May-2005 Commissioning engr
Cairn energy pyt ltd, Laxmi plate form(off-shore
Surat, India.Through Pomentec co ltd,Vadodara Oct-2003 –March-2005 Commissioning engr
Gujarat Petro synthesis Ltd.,Vadodara, India Dec99 toOct-2003 Shift -in charge
Indian Petro chemicals corporations, India Apr 96 toDec99 Sr. engr
Baroda Rayon corporations ltd, surat, India March93 toapr-96 Shift- in charge

PERSONAL DETAILS:
BORN 01.06.1967

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 7051)

Go to Search Parameters...

Brief Description

Industrial Eng. with master degree in HSE. Title obtained: HSE eng. Specialist

A production/well completion engineer with over 20 years experience in Canada and overseas

I have Very good Experience in the Petrophysical Operation, Studies and Well reservoir Survillance. Have experience in QC/QA of integrated studies. Have leadership experience

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Multi skilled engineer, Technical Advisor, Mud Engineer

15 years Mechanical Engineer within Oil / Gas & refinery industry, inclusive 5 years maintenance experience; 5 years for nuclear power project; P.Eng of APEGGA, Canada

Can perform both technical work and sales work involving oil/gas industry more specifically as an advisor, planner, support or salesperson.

Drilling Engineer – DCWO planning, programming, engineering, operations evaluation, performance analysis; deep HPHT gas wells, high deviated, ERD and horizontal oil wells, sidetrack wells; land operations; harsh desert (Middle Asia) and arctic (Siberia) environment; English-Russian-Slovak

Senior Mechanical Engineer experienced in detailed mechanical / thermal / process and E&I design of Fired Heaters, Reaction Furnaces, Reformers, SCR’s WHRU’s, Boilers, Incinerators, Flares and associated ancillary equipment. Very strong E&I, DCS / PLC & BMS skills.

By working 17 years in the field of petrochemical field, I experienced all kinds of key projects like FCCU, Hydro-cracking unit, Hydro-treating unit and have expert ability to do piping static and dynamic stress analysis. Also I have five years working experience as a mechanical engineer in refinery

35 years of experience in the process industry working for engineering firms, equipment manufacturers, chemical company

Conducting a piping training program from zero skill up to a skill trainees supervising the assigned work from planning, organizing, leading and controlling. Performed piping work activities from designing and drawing the piping tie-in to existing pipelines, drawing various structural platform

Twenty years of professional experience in, design, consultancy, construction and maintenance, covering a broad range.

25 years of experience in construction, installation, commissioning, testing and maintenance of Electrical, Electronics and Instrumentation equipments and controls in Petrochemical Industry

Have more than 20 years experience in Piping Design and Engineering including Stress Analysis and Piping Materials Control for various projects in petrochemical plants, refineries and commercial chemical plants. Presently working in Worley Parsons (Colt Engineering Corporation), Calgary, Canada

Overview: Thirty (30) years of engineering management experience, 25 years of which were in the oil, gas and shipping industry and EPC projects that include the following: Project management, conceptual, feasibility studies, detailed design engineering, procurement, constr. and commissioning

Over 18 years experience in 2D and 3D seismic data processing. Processing land desert and mountain data. Processing experience gained in Geofizyka Krakow Ltd, WesternGeco and CGGVeritas. User knowledge of Unix, Linux , excellent Omega SPS and Tango, basic ProMAX. Good MS Office skills.

Advanced Process Controls, RealTime Process Information Systems, LIMS

PROJECT MANAGEMENT, CORROSION & MATERIALS,INSPECTION & INTEGRITY ENGINEER/MANAGER

More than eighteen years of experience in premium International Oil and Gas Engineering Consultancy Companies within the field of Process Safety, Technical Safety and Loss Prevention.

well services, production technology, safety, beam pump

Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.

Reservoir Geologist  To perform characterization Reservoir integrated Studies and reservoir Modeling. Generation and evaluation Geological Prospects and development opportunities. Elaborate Exploitation Plans. Planning (targets) and monitor of Special Wells. Volumetric reserve estimations.

Primavera, MS Project, MS Office, EVMS, Planning

Versatile technology professional with expertise as a Senior Reservoir Engineer and Operations Business Manager. Resourceful problem solver who performs well under pressure. Outstanding leadership, organizational, and communication skills. Granted Top Secret Security Clearance. Analytical.

More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic

SmartPlant 3D/P&ID Application support

I wish to apply for suitable position in the highly motivated & challenging environment. I am having 21 year of experience in different fields of Gas, Petroleum and Chemical industries. Also involved actively involved as an engineering material coordinator. I am having experience in identifying

More than 20 years experienced in project design services which involved mechanical and piping design preparation of conceptual design packages and detailed design packages, specification of pipes, fittings, valves and other specialties. Developed specifications for pumps, steam turbines, tanks, pre

A total of 15 years of professional work experience, (9) years in the Gulf region, of which seven years Were in the oil/gas, petrochemical, power/desalination plant and building construction projects. A Computer literate and proficient in oral and writing English communication skills.

Geophysicist position in a oil-field services company. I have more than 18 years of seismic data processing and data management experiences.

Welding Inspector, CSWIP 3.2, ASNT-II Certified, 18 Years working experience in Oil and Gas Industries in various countries.

Has 20 Years Expeierence in various aspect of Control and Automation and last 7 years in Middle East with ABB /Invensys. Has done large projects and several latest DCS/ESD systems such as Triconex,ABB infi90 , Foxboro I/A , Honeywell TDC3000 etc

I am qualified Degree chemical Engineer from the reputed Maharaja Sayaji Rao Uni, Vadodara

I’ve total of Eighteen (18) years experience in the area of Pipeline design and Piping design for oil & gas and petrochemical projects.

Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion

Expertise in gas sweetening, gas compression, gasification process, and U&O facilities.

Over 16 years experience as Electrical Engineer

I have been a Process Engineer for 16 years. My experience includes process design of oil, gas and petrochemical plants and steam and power generation units, expertise in conceptual design, basic design, FEED and detailed engineering, experienced also in optimization and troubleshooting projects.

Over 20 years experience in chemical, petrochemical and oil&gas industry.

Presently working as Sr APC & Opt Engineer in Qatar Petroleum Refinery. A total of 20 years experience in Petroleum Refinery industry (8 years in APC & Opt, 5 years in Technical Services and 7 years in Operations).

I have extensive experience in Oil&Gas industry and EPC, I have extensive experiencey in Rotating Equipments Design and I worked in a refinery in Egypt as the Head of the Rotating equipments for 14 years.

Having achieved many goals in my long career how MECHANICAL ENGINEER, I am interested in continuing my professional horizons by working as a FLEXURAL STRESS AND MECHANICAL PIPING DESIGN AND LEADING MECHANICAL ENGINEERING PROJECT for your respectable company.

Have about 25 years of experience in logging operations (Open hole, Cased hole and Production Logging Services) and interpretation of well logs (Open hole, cased hole and Production Logging)

To provide technical expertise of piping, mechanical engineering for Oil & Gas, Petrochemical, Power plant. Support to projects management, Supply division and projects controls through all phases of major and minor projects

Process Design Engineer with experience o fEPC contracts in Saudi Arabia. I also have expereince in operating plants, providing plant support. I am currently working as Technical Manager of 20 process engineers, doing small projects execution for Sasol Infrachem Utilities.

Seismic interpreter and reservoir geophyscist with experience in reservoir modeling, geostatistics and rock physics

An experienced Control & Instrumentation Engineer with extensive achievements in leading, designing, executing, and organizing project activities for process industries, e.g. oil/gas refineries, chemical/petrochemical complexes, Power plants, steel and copper industries.

Accomplished PLC, HMI, automation, programmable controls specialist

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out