Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #86593 next resume »»
CONTACT INFORMATION:
View contact information...

Experience of designation

1) QC Inspection Engineer.
2) Structure & Piping Inspector.
3) Sub Sea Wellhead and Equipment & pipe line Inspector.

Personal detail
Date of Birth: 9-8-1982
Citizenship: Malaysian.
Religion: Muslim
Gender: Male
Marital status: Married.
Language: fluent speaking in English, Malaysian, Indonesian, Chinese (mandarin)
Writing: English, Malaysian

Available:
Need company sponsorship if job in oversea.
1 month notice period, offer letter and agreement.
Available working long term if job duration in oversea onshore, (Asia, Middle East, Europe)
Working in Malaysia and (Oversea permanent & contract, depend family package, and contract agreement).
Salary: Can negotiated depend (location, job duration, country and family package).
Contact: mazri.abdullah@yahoo.com

Self introduction

Over than 9 year experience joint in Oil & Gas industrial. Specialize on inspection, testing and documentation for fabrication, installation structure and piping work for offshore Jacket structure and pile make up, process & living quarters offshore platform, FPSO piping process and floating system, sub sea inspection equipment and wellhead, Familiar with AWS D1.1, ASME B 31.1&B31.3, API 1104,API 16 D & API 16 A Specification, knowledgeable about metallurgy metal content, shock growth decay element, mechanical testing for material behavior content, strength, toughness, corrosion entrapment and avoided. Graduation Master Degree due online study program scheme, recognized from (IAAOU) international institutional accreditation online university. Also have knowledge about Welding & Non Destructive Test (NDT) testing method, knowledgeable for CSWIP 3.1 Welding Inspector, CSWIP level II Magnetic Practical Testing (MPI), and CSWIP level II Dye penetrate Testing (DPI)

Personal Education

1) Master Degree of science in Metallurgy & Mining Engineering, Belford University, Texas United State
Reference online no: RV445011
CGPA: 3.84
2) Certification of attend CSWIP 3.1 Welding Inspector Personal level II.
Serial Cert no: 07/WIS5/KL/1113
3) Certification of attend CSWIP level II Magnetic Testing.
Serial Cert no: 04/NDT30MT/CIDB/007
4) Certification of attend CSWIP level II Liquid Penetrate Testing.
Serial Cert no: 04/NDT30PT/CIDB/007
5) NIOSH-OSFAM Oil & Gas Safety passport for offshore and onshore job, still valid until 3/11/2010

Other course

AWS D1.1 (structure welding) specification, internal conduct by CIDB-TWI Johor Malaysia
API 1104 (Pipeline welding design) specification, internal conduct by CIDB-TWI Johor Malaysia
API 16A & API 16 D conduct internal course by FMC Sub Sea Wellhead & Equipment International Company.
Basic and introduction for Ultrasonic testing, internal conduct by CIDB-TWI Johor Malaysia

List of experience Project involves:-

1. May 2009 until now
Project: NCP Structure Pipe Rack.
Client: National Chevron Philip.
Fabrication Company: JGC Cooperation.

Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* All site inspection shall be carried out vide an official Inspection and Test request (ITR).
* Closely monitor site activities to ensure quality of work is in compliance with shop drawings and contract requirements, good construction practice and only approved materials are used.
* Performs inspections of an advanced, more complex nature in addition to providing day-to-day work direction, as required for the inspection of new, existing, or vendor's facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.

2. September 2008 to may 2009
Project: Ruby turret offshore
Client: SBM International
Fabrication Company: MMHE Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

3. April 2008 to August 2008
Project: B 11K-A Jacket
Client: Sarawak Shell Berhad (M) Sdn Bhd
Fabrication Company: MMHE Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

4. July 2007 to March 2008
Project: Gumusut Sub Sea Wellhead Water Injection
Client: Shell International Limited
Fabrication Company: FMC Sub Sea International
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.

5. May 2006 to June 2007
Project: Qatar Petroleum Jacket
Client: Qatar Petroleum Limited
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications

6. August 2005 to May 2006
Project: Sumandak-A Jacket
Client: PETRONAS Carigali Malaysia
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* Performs inspections of an advanced, more complex nature in addition to providing day-to-day work direction, as required for the inspection of new, existing, or vendor's facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

7. March 2005 to August 2005
Project: D-1 Wellhead & Water Injection Platform Top Side
Client: Engineering India Limited
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* All site inspection shall be carried out vide an official Inspection and Test request (ITR).

8. Sept 2004 to Feb 2005
Project: Bongkot Jacket
Client: total Thailand.
Fabrication Place Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

9. Feb 2004 to May 2004
Project: Irong Barat Jacket & Tipod
Client: Exxon Mobil (M) Sdn Bhd
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* Performs inspections of an advanced, more complex nature in addition to providing day-to-day work direction, as required for the inspection of new, existing, or vendor's facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications

10. November 2003 to Jan 2004
Project: Guntung F Jacket
Client: Exxon mobil (M) sdn bhd
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.

11. Sept 2003 to Oct 2003
Project: Yoho YP Jacket
Client: Saipem Nigeria Limited
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
12. July 2003 to August 2003
Project: Yoho ZBA Jacket
Client: Saipem Nigeria Limited
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* All site inspection shall be carried out vide an official Inspection and Test request (ITR).
* Performs inspections of an advanced, more complex nature in addition to providing day-to-day work direction, as required for the inspection of new, existing, or vendor's facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.

13. April 2003 to June 2003
Project: Yoho ZB Jacket
Client: Saipem Nigeria Limited
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

14. August 2002 to July 2003
Project: Kinarut Ewac Topside
Client: PETRONAS Carigali Malaysia
Main contractor: Ramunia Fabricator
Fabrication Company: Menara Bersatu Engineering Sdn Bhd
Daily duties & work responsibility.
* All site inspection shall be carried out vide an official Inspection and Test request (ITR).
* Closely monitor site activities to ensure quality of work is in compliance with shop drawings and contract requirements, good construction practice and only approved materials are used.
facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.

15. June 2001 June 2002
Project: Balal PLQ Jacket
Client: Total Fina Elf
Main contractor: Sime Darby engineering Sdn Bhd
Fabrication Company: Richcall Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* All site inspection shall be carried out vide an official Inspection and Test request (ITR).
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

16. Sept 2000 to may 2001
Project: Angsi A & B Jacket
Client: PETRONAS Carigali (M) Sdn Bhd
Main contractor: Sime Darby Engineering Sdn Bhd
Fabrication Company: Haven Engineering Sdn Bhd
Daily duties & work responsibility.
* Closely monitor site activities to ensure quality of work is in compliance with shop drawings and contract requirements, good construction practice and only approved materials are used.
* Performs inspections of an advanced, more complex nature in addition to providing day-to-day work direction, as required for the inspection of new, existing, or vendor's facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

Reference contact Person:
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 801 to 850 of 6998)Go to Search Parameters...
Brief Description
Electrical & Instrumentation Inspector - Broad experience in E&I installation in Fabrication of Offshore Production Platform, FPSO, D.P Cable Laying Vessel and Oil & Gas Refinery Plant. (Knowledgeable in industry standard recommended practice: NEC 500, IEC/NEC 505, API RP14C, 14F.
Instrument engineer
To Carried out overhauling, repairing preventive, corrective breakdown, and shutdown mechanical maintenance, trouble shooting, condition monitoring, alignments, hydro testing, of rotating & static equipments, like pumps, compressors, fin fans blowers, heat exchangers, column, and using all type of
My strengths are my ability to take charge and work well within a team environment and in my experience in developing algorithms from concept phase to commercial implementation
Read blue prints, electrical scymatics, troubleshooting and repairing electronic devices for the industrial sector and wireless communications equipment.
Information Management, Data Management and CAD Systems Management
Over than 9 year experience joint in Oil & Gas industrial. Specialize on inspection, testing and documentation for fabrication, installation structure and piping work for offshore Jacket structure and pile make up, process & living quarters offshore platform, FPSO piping process and floating system,
I have experience in all phases of both electrical and petroulem experience.
Nimr'C' Full field water injection project.
10+ years of combined professional experience utilizing geophysical interpretation, seismic processing, single stack and simultaneous deterministic inversion, 3D geo-cellular modeling, software consulting, training, and development skills. Working knowledge of 3D interpretation techniques, etc.
SDE with very good experience in very demanding working environment; person self-motivated, performance driven, team player, with good IT skills. Experience in FSU and Eastern Europe. Bilingual Spanish– English, with basic conversational knowledge of Russian.
Mechanical Engineer & a result oriented professional with qualitative experience of over 13 years in Cost Estimation, Planning & scheduling and Cost Control in the EPCM & EPIC projects of Offshore and Onshore Oil & Gas, Port & LNG Terminal and Petrochemical plants in Nigeria, India and Middle East
Wellsite Geologist
High school and some collge . worked offshore jack up rig and onshore rigs in oman , Dubai , Abu Dhabi, Kuwait and recently work in Saudi Arab
Sr. Petroleum Management Engineer with extensive diverse experience in Light to Heavy Oil, Oil Shale, Tar Sands, Reservoir, Completions, Production, Drilling, Well Completions/Simulations and Facilities Engineering, and in Offshore, Deepwater, SURF (Subsea, Umbilical, Risers, Flowlines), Terminals,
Free! Nearly 30 years of significant, progressive experience directing teams to successful completion in onshore and offshore drilling.
Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project
Started carrier with Operations and later switched over to projects. For the last 17 years employed as a safety professional mainly in the Petroleum/ Petrochemical field. Expert in carrying out Safety audits/ HAZOP studies and QRA.
Over 28 years professional experience IT and SAP SECURITY
Geoscience expertise from progressively increasing career responsibilities. Management expertise from progressively increasing career responsibilities. Please see resume for details.
Masters in automotive engineering
Senior Hydrogeologist
Production Geologist 25+ years experience. Expertise in Field Development, mature field integration, locating additional infill drilling targets.
Over 25 Years of Extensive Oil Industry Experience in Contracts Administration, Purchasing and Materials Controls. Presently working for the last two years as a CONTRACTS ENGINEER with RasGas LNG Company, Qatar. Seeking advancement and higher opportunities.
Over twenty years experience in oil and gas construction industries
Senior Reservoir Engineer
Total 24 years in various capacities in Oil refinery, Gas processing including Gas Cracker&Petrochemicals with Technical services & commissioning background that covers Process Design, Equipment rating, Troubleshooting, Plant change orders management, Capacity enhancement.
SUMMARY Professional Production Geo-Scientist with 24+ years experience in Geological and Geophysical interpretations. Technical expertise in Oil & Gas Field Development & Exploration, with the use of well logs, core descriptions, sequence stratigraphic & seismic stratigraphic concepts.
B.Sc. in Chemical Engineering (Gas and Petrochemical); 19 years experience in process facilities (more than 17 years in oil and gas industry). The summary of major duty is design, optimization, installation and operation of process equipment.
Overall 20 years experience in Design, Engineering, Project Coordination, Project management, Maintenance of Instrumentation, Analyzers & Control Systems of Major/DBN Hydrocarbon(Olefins) and Polymer(PVC/VCM) projects. Upgrades of DCS, PLC, SCADA, GC, Process Gas & Liquid Analyzers, CEMS A
32 years of work experience and present position senior most lead inst. engineer
Petroleum Engineer, twenty-two years experience, strong analytical Reservoir Engineering on implementing exploitation strategies for petroleum and gas reservoirs, and secondary recoveries techniques. Reservoir description and simulation. Reserves Assessment. Performance production evaluation. Econom
17+ yrs. experience in petroleum engineering from onshore/deepwater offshore (large) oil & (multi TCF) gas fields. Delivering reservoir/production engineering solutions for maximizing asset value by boosting production, well potential & technical integrity and improving overall business performance.
Responsible for generating all detailed design drawing & ensure that all designs are in accordance to Company specifications and conforms to local and international drawing Codes and Standards. Gathering information thru site surveying as per job modification stated in the client scope of works.
Total experience of 12 years (7 years PDS Administration, 2 Year AutoPLANT Administration, & 3 Years as Piping Design Engineer)
An experienced result oriented Corrosion/Material Specialist with a professional background comprising 10 years of research, technical and supervisory experience in corrosion, materials, mechanical, chemical and metallurgical engineering especially on corrosion prevention and control in the oil an
DCS, SCADA, INSTRUMENTATION
Senior Structural Engineer with 12 years experience in offshore structural engineering. Able to lead, forecast and allocate structural engineering resources and possesses conceptual to detailed design experiences in brown and green field projects.
Mechanic specialist
I have More than 35 years in the marine, oil and gas related industries,
With 13 years of extensive experience in Engineering and Construction of Multi-Discipline projects such as Oil and Gas – FPSO, jakcets, Top sides, Buoys, Industrial Refineries and Heavy Steel Structures
SENIOR CONTROL SYSTEMS ENGINEER
diploma in electrical engineering
Highly accomplished, pragmatic and methodical engineering professional with a progressive career spanning over 13 years in the field of Telecommunication, Industrial Operation, Maintenance of power network & process machinery, industrial installation & erection.
Instrument Supervisor for 10 years. very good computer Literature( office,MS project,Labview...etc)
To pursue a career in the field of Piping Designer (Cadworx-3d modeling) with an emphasis on basic and Detailed Engineering.
Experience/Knowledge in: Classification Survey Statutory Survey Ship Operation/Management/Audit Shipbuilding Ship Repair/Modification Ship Design (Computer Aided-2D & 3D, Structural & Mechanical) Quality/Safety Management & Certification International Standards Project Management Teaching/Training
Intelligent pigging engineer - 13 years of oil and gas experience - Worldwide
20 Years Total Experience In Drilling As Drilling Engineer/ Drilling Supervisor/Well Planning, Well Control, IWCF Supervisor Passed
Drilling, Completion, Fluids Engineering, Directional Drlg Supervisor/Consultant
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   [ 17 ]   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com