Resume - 11 years extensive experience in engineering and design of all piping system and...

Misco Jobs

Resume #86650

CONTACT INFORMATION:
View contact information...

Senior Piping Designer
11 years extensive experience in engineering and design of all piping system and the overall layout of a plant for both on- and off shore project in the field of oil, gas and petrochemical plants, including plot plan development, plant and piping layout study, equipment arrangement, 3D modeling, vendor document review, nozzle orientation and ladder platform, material take off, isometrics extraction, general understanding of pipe stress calculation, familiar with some codes and standards like ASME, ASTM, API, DIN, field engineering and skill in leading piping & plant design teams to accomplish company objectives
2 years experience in HVAC (heat ventilation and air condition) supervision.

PROFESIONAL EXPERIENCE:

CB&I LUMMUS B.V., Netherlands Nov.2008-Present

Nagarjuna Oil Refinery Project, Senior Piping Design Engineer Mar.09-Present
- Responsible for piping layout of main pipe rack of CDU/VDU unit in basic design phase,
- Involved in PMC phase to review of documents

Shell SNR Integrtded HDS-6 Project, Piping Material Control Engineer Mar.09-May.09
- Involved in Basic Design and Engineering Package (BDEP), Responsible for P&ID mechanization and Involved in material estimation at basic design phase,

Hough LNG FPSO Project, Senior Piping Design Engineer Nov.08-Mar.09
- Involved in Front-End Engineering Design (FEED) phase, responsible of piping and plant layout of Inlet Facilities and NGL separation units, Mechanical handling study, development of plot plan and equipment arrangement,

SAZEH Consultants (Engineering & Construction), April.2000-Nov.2008

Hormuz Oil Refinery Plant, Piping Lead Engineer Jun.08-Nov.08
- Assignment to AXENS France for participating in review meetings
- Piping Lead Engineer of Hydrogen unit, responsible for man-hour estimation, review of requisition for steam Reformer and PSA units.

Azadegan Oil Field Development, Piping Lead Engineer Dec.07-Jun.08
- Piping Lead Engineer, responsible for basic design review, involved in detail engineering phase, development of plot plan and equipment arrangement, mechanization of P&ID, line list and responsible for preparation of nozzle orientation, ladder platform, single line diagram for platforms, shelters and sleepers, project communication and correspondence.

Air Separation Plant II, Piping Lead Engineer Jan.06-Sep.08
- Assignment to LINDE Germany for participation in Design review meetings,
- Responsible for leading team of up to 8 members to development of plot plan and layout of pipe racks and trench, mechanization of P&ID and UDD, monthly site visit, change status report, monthly progress report, helping to piping material team for preparation of Technical Bid Evaluation (TBE for Insulation)

PVC Complex (EDC/VCM Plant), Piping Area Leader Dec.03-Feb.06
- Assignment to UHDE Germany to participate in Design and Engineering Package phase (BDEP), FEED and Model Review meetings,
- Responsible for leading team of up to 5 members at EPC phase to piping layout of purification and tankage units, 3d modeling, development of plot plan & equipment arrangement, mechanization of P&ID & UDD, nozzle orientation, ladder platform, instrumentation location, Vendor document review, Checking of Isometrics, piping arrangement, Preparation of monthly progress report, Involved in field engineering.

Air Separation & Compressed Air Plant I, Piping Design Engineer Sep.02-Nov.03
- Assignment to LINDE Germany for participation in Basic Design, FEED, HAZOP study and model review meetings,
- Responsible of piping layout of compressors area and pre-cooling silencer area and pipe rack, mechanization of P&ID and UDD, monthly site visit and preparation of as-built drawings.

4th Aromatics Project, Piping Design Engineer Oct.01-Jan.02
- Involved in detail engineering phase, Responsible for piping design & 3D modeling, Preparation of Isometrics and piping arrangement

3rd Aromatics Project, Piping Design Engineer Apr.00-Aug.02
- Involved in detail engineering phase, Responsible for piping design & 3D modeling of Eluxin Towers, Catalogue & participation in field engineering

Tehran Mosalla Construction Project, 1998-2000
HVAC (heat ventilation and air condition) Supervisor

EDUCATION AND CREDENTIALS
B.Sc., Mechanical Engineering (Fluid Mechanic), Azad Tehran University (1998)

TRAINING COURSE & CERTIFACTES
- Safety Diploma for Operational Supervisors SCC (VCA Certificate)
- ISO 9001:2000 to Quality Management System based on ISO 9001:2000 & TS 29001
- PDMS, Piping and Plant Design, Auto Plant,

COMPUTER SKILLS
PDMS 11.3 and 11.4, Auto PLANT 1.5 and 2.01, Autodesk AutoCAD, Review Reality, Microsoft Office ( Word, Excel, Access, Outlook)

LANGUAGE SKILLS
Good Working knowledge in English and Native in Persian

MEMBERSHIP
Iranian Construction Engineers Organization

General Interests
Literature (Reading of classical literature), Sports (Swimming, Running, Hiking)

References Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 7051)

Go to Search Parameters...

Brief Description

E & I designer

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

My interesting field is Process Engineering and I am ready to work in field run projects, main office or sales departments as a Process Engineer in oil & gas and Petrochemical Industries.

Rotating Equipment Engineer

Experience product and manufacturing engineer with strong understanding in design, product develoment, manufacturing, ECN,ERP

Experienced chemical process engineer with more than four years of demonstrated effectiveness in the Designing, Production and Technical Service fields. Results-given Process Design Engineer with expertise in CTL(Coal to Liquefaction) projects. Experienced Technical process engineer with proficien

Diploma in Electronics with 7 year experience in PLC/CNC/Commissioning

Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.

I am an enthusiastic and professional (HSE engineer) who has emerged from work in-field of Oil spill response, Oil Spill Response Equipment Maintenance, hazardous material response, waste management and STS (Ship to ship transfer) and through the continual training and practical hands on experience,

Mechanical engineer with more than 4 years experience in oil and gas industry including: site management, planning, supervision, construction, overhauling, revamping, petrochemical plants and refineries.

EPIC / EPCM FEED Feasibility study, Project Execution (Contract Management, Schedule and Planning, Cost Control, Procurement / Expediting)

Have gained above 6.7 years depth experience in the Field of Piping and Pipeline in various Onshore projects like Oil and Gas, Power & Petro-Chemical Plants and Water Treatment Plant, Fully conversant with Piping / Pipeline Design Codes API 5L, API6D, NACE, ANSI / ASME 31.3, 31.4 and 31.8.

MECHANICAL ENGINEER (12+), 10 YEARS WORK EXPERIENCE IN QA/QC/QMS WITH REPUTED ENGINEERING INDUSTRIES CERTIFIED WITH ISO/TS 16949:2002 QUALITY MANAGEMENT STANDARD. I HAVE KNOWLEDGE OF 5 CORE TOOLS APQP, MSA, PPAP, FMEA & SPC.

I have 13 years of experience in Mechanical Field as Project Manager in a project of special equipment which is a multimillion Dollars project supervised by me from 2001 to 2004 and have experience in Budgeting, Coordination, Project Management, Planning & Scheduling, Presentation, Construction & Lo

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

Project management & consultancy experience for large refineries & power plant in Mumbai.

Petroleum engineer with over 16 years of industry & regulatory background in production & injection well drilling, design and operations; including regulatory aspects.

Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Electrical Officer Gaining Broad- Based Hands On Engineering Skills Encompassing Servicing ,Installation , Fault Finding , Conversion , Modification , Commissioning ,Surveying , Repair, Running And Maintenance

Offers more than ten years of versatile experience in all phases of petroleum, gas, and alternative production facility operation. Equipped with a master’s degree in chemical engineering and a background in the development of PFDs and P/IDs. Excels at risk/hazard review and mitigation.

8 years experience as a Drilling Engineer, Drilling Supervisor, Directional Driller & Well Performance Engineer(Onshore & Offshore).

Mechanical Commissioning & Maintenance, Maintenance Planning Scheduling

Extensie background in instrumentation and analyzers. Lots of CEMS experience.

Fourteen years Welding/Materials/NDE experience in fossil power industry, oil&gas industry, engineering, fabrication and construction

Currently Sr. piping designer on Bentley 3d and piping design checker. Experienced in all areas of piping Including high temperature and high pressure piping systems, lined and jacketed pipe, stress analysis, p&id’s, specifications, process, utilities, sulfonation, pharmaceutical, pharmaceutical val

Corrosion /Pipeline engineer with 5 years experience

Instrumentation/control/Automation/PLC programming/Robot programming

piping engineer with 5 yrs exp. in piping detail engineering with pdms as a 3D piping software, and PDMS administrator

IT Support/ personnel

Drilling standard directional, horizontal, “S” (build and drop), and build and hold wells for Shell Petroleum, Saudi Aramco, Encana, ConocoPhillips, EOG, Petrobras, Agip, Mobil, Elf, Chevron etc., with MWD/LWD tools and mud motors.

Involved in Sales Support, System Design & Estimation, Tendering & Engineering Low Voltage / Low Current Systems, including Fire Alarm System, SMATV Systems, Intercom Systems, Security Systems, Automatic Gate Barriers / Swing Gates, etc,.

Mechanical Engineer with over 15 years of technical business experience with emphasis in cost control projects.

12th standard,iti-electrical,1year -diploma-electrical,maitenance,comissioning-crane,mcc panel

Detailed Engineering for Offshore Plant, Hysys Simulation, Pipe line sizing, safety Valve Sizing, Equipment Sizing

Senior IT Analyst / Engineer

05 Years experienced HSE Advsior with NEBOSH

11 years extensive experience in engineering and design of all piping system and the overall layout of a plant for both on- and off shore project in the field of oil, gas and petrochemical plants, including plot plan development, plant and piping layout study, equipment arrangement, 3D modeling,

Having over 4 years experience as QC Engineer in various oil & gas indusries like, petrochemical refinery, ship building, offshore wellhead platform construction etc. I have a good background welding & Having ASNT Level 2 in RT, UT, MT & PT

Water/wastewater treatment engineering study, design, modeling, operation optimization for municipalities,oil &gas, refinery,power and petrochemical plants.

Geologist with a very strong experience in most of the oil/gas drilling operations

Qaulity Engineer, ISO 9001. ISO TS16949, Supplier Quality Engineer

More than ten years experience involving in Basic Design & Detailed Engineering, Construction and commissioning in Oil & Gas field. Extensive experience in all phases of Instrumentation Engineering starting from Feasibility Study, Basic Engineering Design Data, Design & Detail Engineering, Construct

Gas Turbine Repair Engineer

B.E., (Bachelor in Industrial Engineering from Indian Institution of Industrial Engineering),

B. Sc. Chemistry (Grade Good)

Senior design Engineer in CITEC engineering vaasa,finland

6 years experienced piping designer, PDS/PDMS & other computer-aid design

Piping Stress Engineer: Have approx. 6.5 years of hands on experience in stress analysis of piping systems and piping design for Petrochemical, Fertilizer , Oil & Gas plants and Offshore platforms using software like CAESAR-II, Well conversant with CAESAR-II 4.5, 5.0 and 5.1 versions. Also, well con

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out