Resume - Experienced and motivated specialist in the operation of Petrochemical plants(is...

Misco Jobs

Resume #87068

CONTACT INFORMATION:
View contact information...

Executive Summary

A highli experienced and motivated specialist in the operation of Petrochemical plants(iso propel benzene plant and phenol plant) and gas plant,with extensive experience on plants in Romania and Libya who has developed:
- organizational and co-ordination skills ;
- management expertise ;
- ability to communicate at all levels ;

As Production Superintendent and Production Supervisor, I had the responsibility for meeting Department objectives related to product production, quality, personnel matters, and interpretation of company policy. This includes continuous improvement of department efficiencies, and development of individuals within the organization.
Also I had Supervisory duties and responsibilities include: a) Responsible for performance management and development of direct reports including written performance appraisals; b) Administers company policies and procedures in the Manufacturing Department; c) Ensures compliance with QSR's and ISO, safety policies, and good housekeeping; d) Responsible for initial training of new employees and on-going training of subordinates to ensure quality of work, QSR's and ISO, and other regulatory compliance; e) Promotes Total Quality Management, and emphasizes an environment to foster teamwork; and f) Effective staffing of organization, including hires and dismissal of employees when needed.
Another responsabilities:
* Ensure that the Permit to work sistem it's used properly
* Responsible for safety of all employees within the organization.
* Develops departmental budgets and maintains adequate staff support for production requirements.
* Ensures production plans are accomplished.
* Manages on-going cost reduction and continuous improvement programs to the manufacturing process.
* Handles disciplinary needs, attendance and individual employee matters of direct report personnel.
* Maximizes all resources with respect to space, parts, machinery, and people.
* Ensures products conform to quality standards by taking the following actions:
* Initiates corrective action to prevent product non conformance.
* Identifies and records product quality problems.
* Initiates and recommends solutions.
* Verifies solutions.
* Controls further processing, delivery or installation of nonconforming product until correction of the deficiency.
* Participates in task forces, committees. teams, as necessary.
I have experience in Oil & Gas Industry in Production and maintenance of high pressure process (CO2 and H2Sremoval using MDEA)and utility equipment including wellheads(oil and gas wells ), turbines(Gas turbines), gas compressors(Reciprocating Compresors,Centrifugal Compresors), process vessels, diesel engines, control systems(ABB Frelancer and Tenore DCS Sistem ), HVAC etc.

Career Objective

* To get new technical knowledge and to combine with my abilities.
* To work in my branch at adequate level.

Bio Data

* Countries Worked In: Romania and Libia.
* Countries Lived In: Romania and Libia.
* Foreign Languages: English, French (beginer)

Work Experience
Period: May 2008-April2009
Position: GTU SHIFT SUPERVISOR
Company: EPSCO Technical Services AG-Switzerland contracted to ENY GAS – LIBYA, MELLITAH GAS PLANT- LIBYA.
Plant/Job description:
Monitoring and control of onshore Gas Plant consists in Gas Treatment Unit (three process trains) and Sulphur Recovery Unit (three sulphur trains).
Involved in Gas Treatment unit: Gas Sweetening with amine( MDEA), Gas Dehydration (molecular sieves), Gas Hydrocarbons Dew Point control (Toromont refrigeration package), Condensate Stabilization Unit (Dresser Rand compressor for off-gas recovery), NGL Fractionation Unit.
DCS: ABB Tenore
Duties: Monitors the operational activities via the DCS, and co-ordinates the process activities according to instructions and production requirements;
Maintains continuous radio contacts with duty personnel, informing them of current operating conditions, laboratory results and co-ordinates the action necessary to maintain within the agreed operating parameters;
Adjusts operating conditions or product flows to allow isolation of equipment for maintenance and resumes operating conditions following completion of maintenance;
Co-ordinates with maintenance for equipment change-over and instrument loop checks. Endorses related Permits to Work and raises Maintenance Work Orders as required;
To carry out start-up preparation, normal operations, shutdown of process/utilities lines as per Standard Operation Procedures;
Determines developing trends in operating conditions, reporting significant changes and initiating actions as required;
I was involved in all the plant activities, in all the areas, supervising and coordinating the activities of the DCS operators and the field operators, during normal operations, start-ups and normal or emergency shutdowns of the plant, also during turnarounds and maintenance activities.

Period: December 2007-April 2008
Position: SENIOR FIELD OPERATOR
Company: EPSCO Technical Services AG-Switzerland contracted to ENY GAS – LIBYA, MELLITAH GAS PLANT- LIBYA.
Plant/Job description:
Monitoring and control of onshore Gas Plant consists in Gas Treatment Unit (three process trains) and Sulphur Recovery Unit (three sulphur trains).
Involved in Gas Treatment unit: Gas Sweetening with amine( MDEA), Gas Dehydration (molecular sieves), Gas Hydrocarbons Dew Point control (Toromont refrigeration package), Condensate Stabilization Unit (Dresser Rand compressor for off-gas recovery), NGL Fractionation Unit.
Duties: Monitors the operational activities, and co-ordinates the process activities according to instructions and production requirements;
Adjusts operating conditions or product flows to allow isolation of equipment for maintenance and resumes operating conditions following completion of maintenance;
Co-ordinates with maintenance for equipment change-over and instrument loop checks. Endorses related Permits to Work and raises Maintenance Work Orders as required;
To carry out start-up preparation, normal operations, shutdown of process/utilities lines as per Standard Operation Procedures;
Determines developing trends in operating conditions, reporting significant changes and initiating actions as required;
I'm focal communications point between Shift Supervisor/Superintendent and Field operators during emergency situations.

* Period: December 2005-July 2007

Position: DCS panel operator
Company & Location: Petroconsult SRL for Attahaddy gas plant development project –Sirte Oil Company- Libya.

Plant description &
Responsibilities:
The Attahaddy gas plant has been designed for treating raw sour natural gas from the Attahaddy gas field by reducing CO2 content and ensuring the compliance with the water and hydrocarbon dew point temperature specifications.The feed gas contains about 12% CO2 and a sizable amount of condensate. The feed gas is collected from the production wells by individual flow lines and is received into the plant in three manifolds. The gas is separated and treated in two identical and independent processing trains, each designed with a front end separation unit; an Acid Gas Removing unit, a Propane Refrigeration unit and a Condensate Processing unit. Both trains are sharing the common facilities as the inlet manifolds, the test separator, the Heating Medium system, the amine storage system, the Mercury Removal system and the flare system.
The front end separation unit remove water, sand and, by cooling the gas, the main amount of condensate. In the Acid Gas Removing unit the CO2 content is decreased to below 2 % by absorption in MDEA solution in an absorption tower, followed by the MDEA solution regeneration. The Propane Refrigeration unit reduces the gas temperature in chillers to ensure the proper water content and the hydrocarbon dew point temperature. This system also uses an MEG injection and regeneration unit for removing the water from the gas. The liquid propane is evaporated in the chillers and is liquefied after been compressed in the propane compressors. The condensate processing unit collect all the condensate from the train, and flashes the condensate to the proper bubble point necessary for transport.
The treated gas from both trains is routed to the Mercury Removal unit where traces amount of mercury are removed and then the gas is routed to the pipeline.
The Utilities and Off-Site Section consist in a Nuovo Pignone Gas Turbine and Generator for the power generation, Demineralised Water system, Raw Water storage and Potabilization system, Fire Fighting system, Instrument and Service Air system using air compressors and the associated dehydration unit, Nitrogen generation package, Fuel Gas system, Flare system.
I was involved in all the plant activities, in all the areas, controlling the plant using the DCS system, during the plant normal operations, start-ups, normal and emergency shutdowns also during the maintenance activities.
As a DCS operatorI had the following duties and responsabilities:
To comply with all company Health, Safety and Environment policies and procedures.
Monitors the operational activities of my assigned area, via the DCS, and co-ordinates the process activities according to instructions and production requirements.
Maintains continuous radio contact with duty personnel, informing them of current operating conditions, laboratory results and co-ordinates the action necessary to maintain within the agreed operating parameters.
Maintains continuous liaison with the Panel Operators of other areas to co-ordinate operations that may affect the operation and/or production or any unit within the plant. Includes synchronising activities to minimise loss of production.
Adjusts operating conditions or product flows to allow isolation of equipment for maintenance and resumes operating conditions following completion of maintenance.
Keeps myself aware of ongoing maintenance work by reviewing permit to work records and operating logs.
Co-ordinates with Maintenance for equipment change-over and instrument loop checks. Endorses related Permits to Work and raises Maintenance Work Orders as required.
Determines developing trends in operating conditions, reporting significant changes and initiating action as required.
I was focal communications point between Shift Supervisor/Superintendent and Field Operators during emergency situations.
Responsible for the support of Company Safety, Environment and Quality Policies and Programmes. Carries out specific duties and responsibilities related to his job as dictated in the Management System Manual, Safety Manual and other related documents.
Carries out similar or related duties such as maintaining shift log, initiating emergency procedures as required while complying with Company safety rules and regulations.

* Period: 2001-2005
Position: Superintendent
Company & Location: Carom S.A. Onesti -Romania

Responsabilities:
Dealing with the coordination of the following processes: IPB (isopropyl benzene) obtaining by alkylation of benzene with propylene, phenol and acetophenone synthesis. Controling the mercaptan absorption process from C3 fraction, using DEA (diethanol amine) and the dehydration unit using molecular sieves as well. Ensuring the observanceof technical documentation, monitoring the production achievement and products quality, supervising supervisors' activities. Elaborating (alongside with supervisors) the operating manuals of the plants after revamping works, attending to process improvement. Taking the corrective adjustments of the process for a better quantity and quality of the finel products: phenol, acetone, acetophenone, IPB. Monitoring the evolution of the pollutants analyzing each of them, adjusting process parameters for lowering the environment impact.

* Period: 1998-2001

Position: Phenol plant –Supervisor
Company &Location: Carom S.A. Onesti-Romania
Responsabilities:
Starting up the plant after revisions works or overhauls, keeping the production at the designed specifications; preparing the plant for revisions or maintenance operations, shutting down it in safe conditions if necessary. Coordonating proces activities, verifying products and raw material quality, lowering the raw material consumption and energy as well. Training the subordinated personnel regarding the plant equiment and process stream, drawing up the overhauls and revisions schedules. Elaboratin the work procedures in compliance with safety regulations and fire fighting rules.

* Period: 1995- 1998
Position: Phenol plant –Team leader
Company & Location: Carom S.A. Onesti-Romania
Responsabilities:
Ensuring the technical assistance during the shift regarding the following processes: cumene oxidation to cumene hydro peroxide and its decomposition to phenol and acetone followed by purifyng process of these components; phenol and styrene alkylation; acetophenone obtaining process. Training subordinated personnel regarding the process, enforcing compliance with HSE regulations, controlling the entire process in safe conditions, veryfing productsquality and adjusting the process parameters according to this, attending to revisions work.

Education
* "Communication and Development of Managerial Ability"-Romanian Institute of Management-Bucharest, June 1997
* University of Iassy, Faculty of Industrial Chemistry -1995, M. Sc.
* High School Baccalaureate –„Cuza Voda „ High School ‚ Husi –Romania -1987.
Computer Literacy
MS Windows ‚ Word, Excel.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 7055)

Go to Search Parameters...

Brief Description

15 years of experience in PDP/FEED/Detailed Engineering and Construction support in Petrochemical/Chemical industry. Extensive experience with Pressure Vessels (ASME Boiler and Pressure Vessel Code: Sec. VIII, Div. 1/2), Piping (B31.1/31.3), Above Ground Storage Tanks (API 620/API 650)

Chemical process/project engineer, small projects manager

Lokking for a Inspector Job

A total of sixteen (16) years of working experience (thirteen years were in the oil/gas and petrochemical construction projects in the Gulf Region. A computer literate and proficient in oral and written English skills. Experienced in civil, building , steel structures, fire proofing and piping works

Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation.

Reservoir Engineer specialized in Simulation

I have 33 plus years of maritime engineering experience. Over 18 years of this is offshore/oilfield/maritime experience as Chief Engineer, Maintenance Engineer. I have an ability to work safely and efficiently, without direct supervision, I use initiative to solve difficult problems and work well as

M.E in Instrumentation Engineering with 17 years Oil & Gas Project design, Detailed Enginerring, Construction & Commissioning .

I GRADUATED FROM TULSA UNIVERSITY ,OKLAHOMA,USA,1985.WITH A BACHELORE DEGREE IN PETROLEUM ENGINEERING,I HAVE A 24 YEARS OF EXPERIENCE IN DRILLING INDUSTRY , IN THE PRESENT TIME I'AM WORKING IN AN OIL CO. AS AN OPERATIONAL MANAGER.

A medical doctor with long years of experienced on the rig,company ,ship,clinic and hospital seeking employment.

Over 33 years of working experience within India and abroad as electrical superor, senior electrical foreman, commissioning engineer, Elelectrical specialist.and Specialist Consultant.All the 33 years Maintenance ,Commissioning and Consultant for CMMS and Mtc Optimation Projects in oil,power Indys.

Mud engineer with 24 years of experience, on land and off shore, made all types of mud, OBM, SBM and WBM

Twenty-Seven years work experience primarily in Mechanical, Process Piping Design, Civil/GIS, CADD (Computer Aided Design Drafting) and CADD Management. Broad based as well as extensive expertise in Engineering Applications and Software Systems.

I am graduated from Algerian Petroleum Institute as an Enginer in petroleum geology (5 years graduation). I was involved in geological interpretation for prospect generation from 1995 to 2000, since then I have been focusing in geochemistry and basin modelling (1D, 2D and 3D) regional studies.

PROJECT MANAGEMENT

Quality, Health, Safety and Environment Manager - Offshore and Onshore

Well Test Engineer

Experienced Professional Mechanical Engineer with 17 years diverse professional experience in Oil & Gas Industry - Project/Design/Operations Engineering, Rotating & Static Equipment sizing and selection, Commissioning Activities, and associated technical skills.

Instrument engineer supervisor material control supervisor

Individual expert in Surveying - Topography - Land registration - Remote sensing – GPS – Cartography - GIS agreed by the European Commission

I am a Civil Engineer, Internal Auditor & shortly being certified as Lead Auditor by IRCA.

Well Integrity Specialist, Completion Production Engineer

I offer many years of experience in the Petroleum Reservoir Engineering field. I have expertise in reservoir engineering management and consulting, reservoir integrated studies, well testing/pressure transient analysis and decline curve analysis

1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu.

EEHA and Hazardous Area Expert - Seeking FIFO - Remote Area Work

Administrative and Technical support Telecom, Electrical, Electronics and Instrumentation professional with 19 years of experience in India & Abroad, fast-paced environments demanding strong organizational, technical and interpersonal skills

15+ years of various jobs with Foxboro DCS, and Triconex IPS/FGS Systems

I senior completion and workover engineer 19 yeas experience

ISO 9000:2000 QMS-03 Lead Auditor IRCA Course No.17047 and Internal Quality Auditor (IRCA No. R141), Senior QA/QC Engineer, Certified Welding Inspector (CSWIP3.1), SNT-TC1A Level 2 for RT film interpretation / UT / PT and MPI, Piping, Blasting/Painting, Structural & Pressure Vessel Inspector. Expert

Rigging & Lifting Supervisor, Health & Safety Advisor, looking for work in the construction industry, freelance contractor

I am a Petroleum Engineering Technologist with 29 yrs E&P experience, the last 12 yrs have been with major Operating Companies in positions of; Lead UBD Engineer, UBD Project Manager, UBD Advisor and Drilling Supervisor. Available for a new project 30 Novembewr 2009.

20+ years piping field - 13+ years PDS

over 35 years expierence in piping design; AutoCad, VersaCad, Intergraph 3D piping

Integrity management engineer with world leading expertise

Corrosion and Metallurgy Engineer, Painting and Coating Inspector, Engineer, QA/QC Inspector, Manager

I strongly beleve that I am a match for the position of Drilling Completion Engineer with any Oil/Gas organization , and that the beneficial will be mutual.

Experience Environmental engineer in the oil and gas and fertilizer industries in the field of environmental monitoring, auditing, implementation of Environmental Management System ISO 14001, Waste Management

Rotating Equipment, Package Engineer, Water and Waste Water

I am HSEQ professional and want tp work with any multi-national company as HSEQ Professional.

My working career was started from 1988 after pass out Diploma in Electrical Engineering 3 year’s course. I have total 20 years of experience in various fields. I will do all types of maintenance, troubleshooting & commissioning works.

C&I / DCS/Control System/Engineering/Project Management

Electrical and Instrument Project Execution, Installation, Precomm, commissioning and Estimating

21 years experience in Drilling Engineering.

Refinery Analyzer Engineer

I could be a valuable asset to your organization because of my vast background in the Oil and Gas industry. I have worked in almost every corner of the industry, from the bottom to the head man, in the field and in the office. I have attended NAIT (Northern Alberta Institute of Technology

27 Years Experience in the Field of Piping Construction and commissioning for Oil & Gas Industry,

Experienced and motivated specialist in the operation of Petrochemical plants(iso propel benzene plant and phenol plant) and gas plant,with extensive experience on plants in Romania and Libya who has developed organizational and co-ordination skills along with management expertise

20 years experience QA/QC SENIOR WELDING INSPECTOR IN petrolium refinery piping &cross country pipelines .having CSWIP-3.2,API-510,PT,MT,RT&UT ASNT LEVEL-2

Technically competent electrical engineer with chronicled success of over 27 years predominantly in managing installation, commissioning ,operation and maintenance of electrical equipments, networks in various projects including - power generation, desalination, oil & gas production/ process facili

Experienced on preparing Engineering Design such as FEED preparation package and Detail Design preparation package including procurement and planning support activities and projects involves are TOTAL FPSO, Off- shore Facilities, On- shore gas plant, semi- conductor plant, pharmaceuticals plant.

First 1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out