Resume - Mechanical Commissioning/Start-Up &Generation advisor engineer

Misco Jobs

Resume #87120

CONTACT INFORMATION:
View contact information...

Date of birth: 07/10/1976
Place of birth: Assiut-Arab Republic of Egypt
No. of children: one.
Martial status: Married

Academic field: Mechanical engineer (Power Section).
Title job: Mechanical Commissioning/Start-Up &Generation advisor engineer.
*Objective:
To get a challenge position in the field of power plant, Oil and Gas utilities commissioning, pre commissioning, Start up and Shutdown Engineer.
*Education Data:-
1-B.Sc Mechanical Eng.(Power Section)Assiut University, Egypt, May-2001.
¹ of years study: 5 years
Project: Cooling systems( Excellent 87.5 5%)
2- Power Plant Diploma Engineering Assiut University, Egypt, July-2009.
¹ of years study: 2 years General Grade: Very good.
*Training: -
-In faculty of Engineering workshops and laboratories during study years.
-SIEMENS training in El kurimat project combined cycle 2*750 MW.
*Cuurent Job: Mechanical commissioning/start-up Engineer with PGESCo- Power generation engineering & service company –consultant company revised to Bechtel corporation.
Current project: - (EL-Kurimate project 2*750 MW Combined cycle).
Work history and previous jobs**

1- Operation Engineer) junior &senior)
Place: Assuit thermal power plant 2*312 MW, Assuit, Egypt.
Position: Operation Engineer (junior & senior ).
Duration: (March 2002 –March 2005 ).)

2- Senior Operation engineer
Place: Dubai electricity and water authority (DEWA), E- station (625 MW Combined cycle, BPST, Auxiliary boilers ) & desalination plant (MSF), operation department.
Position: Senior Operation Engineer for thermal combined cycle and desalination plants.
Duration: from (March 2005 – March 2007).

All my experience during previous jobs

Junior and senior operation engineer experience:
1- Safe Startup & shutdown procedures for system steam turbine units 2*320 MW (cold start up, warm start up, hot start up).
2- Safe Startup& shutdown procedures for gas turbines GT's (PG9151) (3 * 110MW )design load and waste heat boilers 3* 240 T/H. (cold start up,, hot start up) water treatment plant & desalination plant 4*7 MIGD).
3- To be responsible for monitoring and ensuring the efficient operation of the equipment in my designated area, handing over to the incoming shift in a systematic and orderly manner.
4- To prepare and hand over equipment in a safe manner to maintenance staff for repair and take back in service after checks as per maintenance
5- To ensure that all of the capabilities the Integrated Control System are fully utilized to improve plant efficiency, product quality and safety.
To provide reliable and accurate information on plant condition and status to the Shift Supervisor and Shift charge Controller, for planning product movement, maintenance activities, Laboratory analysis and daily management reports.
6-To insure integrity function test change over routine and other
Scheduled verification tasks are completed efficiently and maintain the
Appropriate records and documents.
7-To communicate and coordinate with other up-stream and down-stream partners, other Departments and shift personnel to operate the plant
Smoothly and swiftly identify abnormalities.
8-To handle emergency incidents (Fire, Gas leak, Plant Shutdowns etc.) and ensure emergency plans and procedures are adhered to.
9-To comply mostly with company Health, Safety and Environment as well as Work Permit, policies and procedures.
10-To be able to communicate effectively, taking into account the wide Variety of workforce language and cultural background

3- Mechanical Commissioning/Start-up & Operation AdvisorEngineer (current job)
Place: Kurimat New project combined cycle power plant 2*750 MW.
Company: PGESCo (power generation engineering construction and service company) as a consultant.
Duration: (March 2007 up to date).
-The project outline-
Projects Gas Turbines HRSG's SteamTurbine Water tre treatment
Model Control Model Control Model Control Plant
Kurimate II SIEMENS TELEPERM CMI HITACHI Speed METTETO
finished (V94.3A) XP SKODA Emerson 1*263 MW Tronic
2*250 MW 2*331T/H Mark IV 3 Streams each one
GE Speed CMI ALSTOM TCS 1500 M3/Day
Kurimate III MS9001FA Tronic INITEC Emerson 1*263MW 300
In progress 2*250 MW Mark VI 2*331T/H

General commissioning/start-up experience:
1-I am exclusively working with a huge International Engineering contractors like SIEMENS,GE, ALOSTOM, SKODA, CMI, ENTEC and Hitachi.
2-Experience in a modern thermal power plant, and commissioning activates related to mechanical attend site mechanical commissioning/erections and other technical meetings.
3- Experience with the different operation systems that related to thermal power plant, gas turbine, combined cycle and desalination plant.

General Duties and Responsibilities:-
1-To assist Manager Commissioning (Mechanical) in all the activities which required supervision, coordination and follow-up mechanical tests on completion of the plant ( systems walk down, piping hydrostatics tests& flushing, mechanical equipments first start-up, chemical cleaning, steam blow out--------------ect,).
2- Enhances skills, performance and development of all employees by sponsoring and promoting on job training programs to ensure adherence to specifications and promotes work of the highest quality (shift advisor job).
3- Directs, coordinates and supervises the actions of client operational staff during the pre-commissioning, commissioning, start-up and operational phases of project execution.
4- Troubleshoots plant operational issues and coordinates corrective action with required discipline to Ensures proper operation of all systems and equipment and Ensures compliance with water and steam chemistry requirements befor issue TOC. For the contractors.
5- Monitor and report day to day any mechanical defect / deficiency in the plant or any deviation from the contractually specified scope and reports discipline progress against schedule activities.
6- Maintains a safe and healthy work environment by following and ensuring adherence to Established project Safety Procedures, Work Permit Procedures, Work Order Procedures & Lock Out / Tag Out (LOTO) Procedures.
7-Plans and coordinates DCS Logic Functional testing with I&C, Electrical and DCS commiss. specialists and Participates in Plant Performance Testing.
8-Reviews engineering drawings and specifications to ensure a thorough understanding of plant operational and safety related issues.
and develops work plans to support project milestones.
9- Ensures effective application of all strategic commissioning tools, techniques and programs (for example, Commissioning Manual, Field Reference Guidelines, Manufacturers' recommendations, standard industry practices).
10-Continually improves commercial and organizational skills and knowledge.

*Others experience that I was gained during the work:
Good experience with Dealing of different Maintenance work types like:-
1- Routine Maintenance work. 4- Emergency Maintenance work.
2- Preventive Maintenance work. 5- Overhaul Maintenance work.
3- Predictive Maintenance work.

**Personal skills**
*Language: Arabic: Native tongue.
English: good in understanding, speaking and writing
Germany: little pit I was studied 3 years courses. Germany
*Computer skills:
Good user with: -MS windows 98, 2000 and XP -Word and internet.
-MAXIMO(Maintenance Management System).

***Merits***.
*My mission: *this is my business
To ensure that high quality product demand of the customers is met at all time reliability, efficiency and safely.
* My vision: *where I want to be--??
To become and remain the best engineer in my field and continuous searching for basic science for best performance.
*Values: *what I believe in my self----??
* Continuous innovation, hard work and the ability to motivate others, result in leadership that's truly exceptional.
* Fairness, equity, integrity, honesty and trust.
* Using sound judgment and common sense.
* Good understanding of integrating multicultural staff into one team.
* Ability to communicate and interact with employees at all working and management levels
* Ability to build effective relationships with Client, Engineering, Construction and vendor personal.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 7054)

Go to Search Parameters...

Brief Description

Maint Planning, Materials management, warehouse, plant maint, turnaround, project

Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation

Reservoir/Geoscience Technician

Completion/Workover Supervisor

Oil and gas production, well testing, gas lift wells performance, Gas lifting optimization and automation, Gas sweetening efficiency, improve chemical injection to better water separation and minimize the consumables, giving training of local operators and engineers. Operation and production techno

I am a Chemical Engineer having 10 yrs of valuable experience in various areas of petroleum refining including unit operation, Revamp jobs, Process engineering, Process Modification, PFD/P&ID review, HAZOP study, Safety review, troubleshooting, Advance Process Control, Simulation Studies

Mechanical Supervisor/technician

Mechanical Commissioning/Start-Up &Generation advisor engineer

An Electrical Engineer having 10+ years of experience in Petroleum & Petrochemical Plants

DCS, PLC, Automation Specialist

Instrumentation ICSS commissioning specialist

Sr. Designer with Autocad,Microstation, PDMS,AutoPlant, SmartPlant

14 years in Details engineering, Control system, Construction, Operation and Maintenance works of Electrical and Instrumentation in EPC projects Oil & Gas, Hydrocarbon, Petrochemical, Refineries

Sr. Java developer

Have B.Sc. degree (2:1 upper division) in Geology, and 11.5 years (1998 – 2009) working experience with Shell E&P (Netherlands and Nigeria) as senior Geologist and subsurface team leader. Very skilled in static modelling using Petrel, HCIIP volumetric computations, Field development planning

Senior Piping Designer/Field Coordinator/PDMS and PDS Designer

General Analysis of Petrochemical, raw materials, process, products, customer complaint. Expert in several Lab instruments as AAS, ICPS, ICS, DSC, HPLC, GC, etc.

31 Yrs. Of Experience i Rotating Equipment Maitenance /Conditio Monitoring

I have high energy level and eager to learn new skills ,I am very organized person and in my entire job I have organized my activity and other people activity.I can take responsibilities ,I am a customer focused and I have always met my deadlines.

Solid experience in Project Management and Project Control of Oil and Gas Projects.

■ Quality-driven professional with over 25 years of experience■ Verifiable track record for successful completion of projects in EUROPA ,SOUTH- AFRICA.RUSSIA and QATAR. ■ Business oriented; able to understand and execute broad corporate policy. ■ Implementatio

Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes.

I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const

I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3).

NACE 3 Senior Coatings & Insulation Inspector

Chemical Engineer with 12 years of experience

Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic

Quality Assurance/Control * Inspection & Project Engineering * Welding * NDT * Coating * Fabrication * Construction * Offshore and Onshore Gas / Oil / Gas Plants*Jackets / Topsides / Well sites / Pipelines / Piping / Structural / Pressure Vessels / Tanks /

Telecom Engineer transmission speciality more than 16 years experience

18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years

Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures.

Ph.D. materials engineer with 23 years of R&D experience in: a) Program management; b) Measurement of material properties Test method development and fixture design; c) Polymers, composites and their processing; d) Laboratory supervision and management of technical personnel.

A Professional Mechanical Engineer with nearly 13 years of experience in project as well as maintenance field in Power and Petrochemical industries, to seek a performance oriented and challenging career in the Industry.

A highly competent and hard working Instrumentation & Control Systems Engineer

Over 12.5 years experience in process piping design. In Design equipment arrangements and piping layouts, isometric and GAD piping drawings with using engineering 3d and 2d software. My other activates such as material take-offs, checking, and supervising the piping personnel as in team.

AWS,CSWIP with 16 years of experience

Sales Engineer

I 19 year experince in instrumentation.

Education : 1).M.Tech (Mech) 2) B.E (Mech) Software Skills:- CAESAR – II 4.5 & 5.0, PDMS Review & PDS / Intergraph Smart Plant Review (SPR) and Piping Stress Engineer + 7 Years of Experience

10+ years of experience in Piping Design, detail engineering, PDS, Estimation& tendering.

A dedicated, hard working and objective driven Reservoir Manager with more than Ten year diversified experience in Upstream E & P Sector.

Drilling Engineer with 7 years of experience

PABX SERVICE ENGINEER

Production Engineer with 12 years of industry experience

Having Experience in Construction of all Types of building. Industrial Substation, foundation, Water Treatment Plant ,Tank foundation, Pipe rack foundation, Infrastr

25+ Years Experience Prepared P&IDs, equipment arrangements, piping layout drawings, system and fabrication isometrics, and as-built drawings. Provided field construction support services including: QA/QC for mechanical systems, trouble shooting and correcting mechanical/piping conflicts.

Senior Drilling Engineer with over 10 years of experience in both international and domestic arenas of drilling, completions, and workover operations with dual citizenship in Canada and Brazil. Excellent cross-cultural communication skills with language abilities in Portuguese, French, some Bahasa

Process/P&ID Designer with Smartplant PID experience

Senior Vessel Designer

Good in design of pressure vessels and storage tanks, Cathodic protection, Corrosion monitoring and control of pipelines; Installation/maintenance of gas turbines; Excellent in facility management, inventory, warehouse and logistics management; Good in preventive and corrective maintenance

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out