Resume - Mechanical Supervisor/technician

Misco Jobs

Resume #87121

CONTACT INFORMATION:
View contact information...

MARITAL STATUS: Single

NATIONALITY: British
DATE OF BIRTH: 5 September 1969

DRIVING LICENCE: 609059 RW9FF

EDUCATION AND QUALIFICATIONS
SCHOOL ATTENDED: Aberdeen Grammar School

'O' GRADE: Metalwork
CSE: Arithmetic English
Modern Studies Science
COURSES ATTENDED

1 Year YTS Forklift Certificate
Fitter Welder Course MV104 City & Guilds
Abrasive Wheels Course RTITTB Safety Foundation Module
RGIT Fire fighting Course RGIT O.P.I.T.O. Offshore Survival
Wellhead Familiarisation Course Lok-Ring & Jointing course
Manual Handling Course Hydratight bolt tensioning City & Guilds Oil & Gas Separation
OSMTD- offshore Supervisory Management Course
NVQ level 3 Mechanical Engineering IOSH Certificate

WORK EXPERIENCE

May 00 – July 09 Wood Group, Aberdeen
Mechanical Supervisor.(Offshore, Clyde platform) (Supervisor FromJune-06)
I am currently Supervisor in charge of all aspects of running the
Mechanical department Main duties include: ordering
Spares, budgets, manpower and planning of all work within the department
Liasing with the OTL as to priority work schedules.
Maintaining all equipment and processing all data in to Maximo database system.
Maintaining and repairing all mechanical equipment on the platform.
Co-ordinating adhoc mechanical shutdown personnel, and controlling all spare parts, permits and associated mechanical requirements.
Gained City & Guilds Oil & Gas Separation module & Coxswain
Certificate
Level 3 NVQ Mechanical engineering
OSMTD management certificate, gained
Gained a lot of plant experience on Clyde Platform and process knowledge.
May 99 – May 00 MESSER NITROGEN, Portlethen
Mechanical Fitter shift Supervisor

Involved in the running of 8 primary compressors feeding NPU units ongoing to feed
2 4 stage Collicut Hanover boosters to maintain a steady SCFM down the parasitic annulus on Under balanced drilling project on the Jack up Britannia. Main tasks were to keep primary compressor engines running at all times and regulate and adjust primaries and boosters as to requirements of the driller.

Sep 98 – Dec 98 AOC Hopkinsons, Stonehaven
Valve Technician

Stripping down, inspection and rebuild with new parts, also test and certification of general valves, pressure relief valves and pressure safety valves.

Feb 98 – Aug 98 WELLSERV PLC, Aberdeen
Wellhead Service Engineer

This involved working on Various Offshore Platforms where I repaired, tested and overhauled Wellhead Equipment and Trees. This also included maintenance of the same equipment. Surface completions Mcevoy trees and fmc also Vetco Gray.

Dec 97 – Feb 98 AJT ENGINEERING, Aberdeen
Mechanical Fitter

Temporary work covering same tasks as when previously employed.

Sep 97 - Sep 97 Santa Fe Drilling, Aberdeen
Subsea Engineer Senior Hydraulics Engineer

Working as Subsea Engineer Offshore on Galaxy One.

Mar 96 - Sep 97 AJT ENGINEERING, Aberdeen
Mechanical Fitter

Working on Ram and Annular B.O.P.'s, Pulsation Dampers, Tubing Hanger Running
Tools, various Actuators, Ball Valves, Riser Spider Joints and other types of Oilfield
Equipment. This work involves stripping down, preparing for inspection, rebuilding and pressure testing of the equipment to required A.P.I. spec. And the Supervision of
Semi-skilled Fitters. Also offshore on Byford Dolphin for Third Party Inspection of entire Subsea B.O.P. stack due to key seating caused by drilling, involving a written report to Hydril UK.

Dec 95 - Feb 96 ABB VETCO GRAY, Aberdeen
Temp. Mechanical Fitter

Stripping down, inspection and repair of Subsea and Surface running tools and associated equipment in the rental dept. For recertification for clients.

May 95 - Nov 95 ABB VETCO GRAY, Aberdeen
Temp. Mechanical Fitter
Test & Assembly of Subsea Xmas Trees, L.R.P.'s, P.G.B.'s, R.G.B.'s and associated equipment and hydraulic pressure testing and flushing to NAS Level 6 with Braco and HW540 as the main control fluid. Also testing equipment by submergence in water with nitrogen for purges and porous metalligeral structural faults.

April 95 - May 95 DRIL QUIP, Aberdeen
Temp. Mechanical Fitter

Assembly in T & A subsea Xmas trees and associated equipment, P.G.B. 's and
L.R.P.'s etc. Pressure testing of same equipment.

Feb 95 - April 95 BAKER OIL TOOLS, Aberdeen
Temp. Mechanical Fitter

Assembly and disassembly and Q.C. of down hole navi drills with mud motors. Built to spec of required well operations!

Oct 94 - Jan 95 GRAMPIAN MOTOR ENGINEERS
Mechanical Fitter Supervisor

Refurbishment of diesel motors and pumps. Gearboxes and clutches for marine and commercial use.

May 94 - Aug 94 INGRAM CACTUS, Aberdeen
Mechanical Fitter

Assembly of casing hangers, mudline hangers, wellhead casing with valves and hydrostatic pressure testing of the above equipment. To API 6a specs! Fat

Feb 94 - Apr 94 WORLDWIDE OILFIELD MACHINE
Mechanical Fitter

Initially employed temporarily for 2 weeks for dismantling Vetco Gray solid block with RHA actuators. Due to further duties, was asked to work an additional 5 weeks.

Aug 92 - Oct 93 WORLDWIDE OILFIELD MACHINE
Mechanical Fitter

Dismantling, fault finding and repairing water, oil and gas valves. Also building of wellhead test manifolds, standpipe manifolds and wellhead choke manifolds.
Refurbishment of solid block valves and hydraulically actuated gate valves including refurbishment of actuators such as OTIS, RHA, WKM, WOM, Cameron, etc.
Refurbishing of cement circulating subs and various downhole tools. Testing of subsea valves. Lapping of gates and seats and the use of liquid nitrogen for replacing choke beens on wellhead manifolds. Underwater testing of gas valves with the use of nitrogen and pumps. Various hydrostatic tests on miscellaneous oilfield products for recertification.

May 90 - Jul 92 GRAMPIAN MOTOR ENGINEERS
Motor Mechanic

Duties involved all aspects of vehicle maintenance, repair, and faultfinding.

Jul 86 - May 90 WOODSIDE GARAGE, Aberdeen
Apprentice Motor Mechanic

Duties involved fault finding, general maintenance and repair of all types of motor cles, including diesel.

Jul 85 - Jul 86 GRAMPIAN MOTOR TRAINING Motor Mechanic's Course

One year training course involving all aspects of vehicle maintenance and repair.
Worked 4 days per week in workshop and one day was spent attending lectures.

May 84 - Jun 85 HALL RUSSELL TRAINING CENTRE
Fitter/Welder's Course

One year training course involving fitting, welding (ARC, TIG, MIG, and GAS), basic thread form, tapping, drilling etc. Also attended Abrasive Wheels Course.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 6997)

Go to Search Parameters...

Brief Description

A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.

Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.

Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.

Full hands-on maintenance, Working under extreme conditions

M.Sc. Petroleum Engineer with excellent experience in Petrophysics- Specialist in Geolog Software_highly self motivated, Oriented and hard working, able to work in multidecipline, willing to travel internationally on mission

Linux/Storage Admin

Piping detail design isometric MTO and layout detailng etc

Highly skilled engineer with over 10 years experience undertaking electrical engineering projects as well as having an understanding of industrial automation

Currently authorized to work indefinitely in the United States (Green card holder). Have more than 6yrs work experience in the oil industry. Worked as a Petroleum/Reservoir engineer and well versed in EOR and secondary recovery techniques and use of commercial reservoir simulators

Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).

I am a fully qualified Electrical Engineer to HNC level, having served my apprenticeship with a multi-national company within the UK. I enjoy excellent health and am competent, dependable and hardworking. I am equally comfortable working on a solo project or as part of a team.

Mechanical Engineer with 12 +years expereince with experience in Front end Engineering and Detailed (FEED) Engineering, Project Management and supervision industrial projects in Petrochemical/Oil & Gas. Presently i am working in a Engineering Consulting Company in Saudi Arabia.

Having total 10 years of exp. in HSE-Safety field in Petroleum/oil/gas Project, steel, automobile plant and project at Oman , UAE, Qatar & India

Over 10 years experience in shipping industry mainly in estimation, project planning, building, design and purchase.

SENIOR PIPING / MECANICAL DESIGNER

Geotechnical Field Rep

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

A highly skilled Chemist Engineer with over 24 years experience in Oil and Gas Industry in Romania and abroad. QUALIFICATIONS: technical advisor, training supervisor, commissioning & start up engineer , shift supervisor

I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.

NAval architect

Motivated and capable in team or independent work setting , Strong problem solving abilities, Mechanical aptitude, Receptive to feedback, Attention to detail with strong sense of urgency and precision , Honest and hard worker, Quick learner, Supervisory skills (managed up to 60 people),

QA/QC Inspection Engineer

I am a Petrophysicist with 8 years experience in a major independant energy company. I have worked in exploration and field development. I have a masters degree in petroleum geology and undergraduate degree in geology. I have well developed communication and interpersonal skills.

A result-oriented Instrument/Control Systems Engineer offering over 11 years of experience in the Petrochemical, Oil, Gas and Refinery industry handling operations and maintenance.

Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

Reservoir or Production Engineer

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

Petroleum Engineer with various and quantifiable exposure in production and reservoir engineering roles. Been involved in both onshore and offshore work environment, mature and new field development, heavy/light oil and gas wells.

Static equipment like vessel, tank and heat exchanger

BS Ceramic and Cement Technology, my experience is working in the field of Refractories and insulation, i have about 12 years field experience.

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

See resume body

Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.

Maint Planning, Materials management, warehouse, plant maint, turnaround, project

Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation

Reservoir/Geoscience Technician

Completion/Workover Supervisor

Oil and gas production, well testing, gas lift wells performance, Gas lifting optimization and automation, Gas sweetening efficiency, improve chemical injection to better water separation and minimize the consumables, giving training of local operators and engineers. Operation and production techno

I am a Chemical Engineer having 10 yrs of valuable experience in various areas of petroleum refining including unit operation, Revamp jobs, Process engineering, Process Modification, PFD/P&ID review, HAZOP study, Safety review, troubleshooting, Advance Process Control, Simulation Studies

Mechanical Supervisor/technician

Mechanical Commissioning/Start-Up &Generation advisor engineer

An Electrical Engineer having 10+ years of experience in Petroleum & Petrochemical Plants

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out