Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #87209
next resume »»
CONTACT INFORMATION:
Objective: A Career oriented individual with 14 years of oilfield experience. Specialized and experienced, at a Management level, in completions, workovers, and aspects of oilfield work seeking full time employment.
Employment History
2005 – Present - Self employed as Principal of Big K Contracting, with work assignments with perfect HSE record, for the following 4 companies: Enforcing all corporate and legislation policies ( well control, HSE, risk assessment, JSA, crew training, incident reporting, communication with Office base )
Encana Oil Corp. ( Based out of Dawson Creek, and Fort Nelson, BC )
* Well site supervisor for Completions/workover on sweet and sour wells
* Vertical wells 1000m – 3000m
* Horizontal wells 2000m – 3000m vertical with 1000m – 2000m horizontal
* Completed wells rigless, 2" coil, stand alone snubbing unit
* Up to 9 intervals fracing every intervals. 4 wells per pad
* Stand alone subbing units
* Cut and caps and abandonments. Plunger lift and Optimization programs
* Worked with Well view for well files
Shell/Duvernay Oil Corp. ( Based out of Dawson Creek, BC )
* Completions Well site supervisor for Vertical and horizontal wells
* Coil completions up to 16 intervals, fracing all intervals, snubbed in final string
* Worked on completions, 1500m- 4500m, sweet or sour wells
* Worked with 10,000 PSI equipment
* Completions with 1300 m3 – 4000 m3 water fracs, 3 ½ frac strings
APACHE ( Through Gerry Well Services) ( Based out of Zama City, BC )
* Well site supervisor for winter project, on Abandonment's in sour field
* Worked with service rig, Eline/slickline unit, cementing units
Canadian Natural Resources Ltd. ( Based out of Fort St John, AB )
* Well site supervisor for mostly workovers and production in up to 5% sour field
* Worked with service rig, snubbing units, swab rig, testers, and slickline/Eline units, Preformed multiple 20% acid jobs
* Have preformed over 100 bottom hole pump changes and BHP installs
* Worked extensively with 1.25" - 1.5" coil units
* Worked with Well view for well files
Previous Oilfield Experience:
Kodiak Well Service Ltd. 2001-2005 ( Based out of Beaverlodge, AB )
* Rig Manager on a double service rig.
* Worked on single to triple gas completions at depths of 1500m to 3000m.
* Fractured all zones with water or hydro carbons up to 1500m3 and 100 tonnes of sand.
* Completed numerous locations with up to 5 wells on a pad.
Precision Drilling 1999-2001
* Worked as a Rough-neck on a double drilling rig.
* Drilled depths up to 2000m with invert.
Grimes Well Service Ltd. 1995-1999
* Moved up to a Driller position in 1997.
* Worked on single and double service rigs. Mostly BHP change outs and installs
* Most formations sour up to 40% H2S.
* Serviced well depths of 1000m to 2000m.
Education
* Received Grade 12 High School Diploma
Mount Baker Secondary School, Cranbrook, BC
Computer skills
* Oilfield Well Management (Jeff Rice Program)
* Microsoft Word and Excel
* Windows XP/Vista
* Air Card Watcher (remote internet program)
* Well View
Oilfield Tickets
* Safety Management and Regulatory Awareness or Well Supervision Jun. 25/2011
* Well Service Blowout Prevention Jun. 11/2013
* Detection and Control of Flammable Substances Feb. 27/2012
* H2S Alive Jan. 01/2010
* Fall Protection for Rig Work No Expiry
* Fall Rescue for Rig Work No Expiry
* Level 1 Workplace First Aid Sep. 01/2012
* Ground Disturbance Jan. 16/2010
* Class 1 Driver License (6193053) Sep. 24/2011
* PST, IRP 16 Jan. 03/2010
* Fire extinguisher, Bear aware, TDG, Whimis Training.
Other Experience/Accomplishments
* Able to read, write and speak English.
* Worked in many climates with temperatures from -40C to +35C
* Able to adapt easily to different cultures and locations
* Prime contractor for 60 x 100 shop with down draft paint booth
next resume »»
Search Results (Resumes 1 to 50 of 7037)
Go to Search Parameters...
Brief Description
Free!
Completion Supervisor for vertical and horizontal wells with 14 years experience
Free!
Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.
Free!
Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.
Free!
Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
Free!
Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.
I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position
Experienced Ph.D Reservoir Compositional Simulation Engineer
Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC
I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.
30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.
cfd, thermal, aircraft, turbomachinery
I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .
A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for
A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi
I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc
23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses
As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.
front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic
Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.
Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)
Process Flow Assurance Engineer
Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.
I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.
20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms
Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller
I had a master degree in structural engineering from the University of Southern California.
30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.
Free!
A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.
Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer
Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.
Chief structural
Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing
As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.
I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.
Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.
More than 25 years in OIL & GAS Offshore and Onshore Industry.
Senior Geologist - Develoment Geologist - Advisor
Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation
Free!
BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.
MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities
Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.
Control System Engineer
Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects
Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.
Mechanical maintenance trainer
I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems
Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design
27 years experience in reservoir engineering, from field operations to pressure testing and simulation.
A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c
SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills
First
[ 1 ]
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com