Resume - Talented ¡¥Senior Corrosion Engineering & Control Professional, Specialized in C...

Misco Jobs

Resume #87217

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE (Beginning with most recent):
Middle East Engineering & Corrosion Control, Qatar (May 2008 to Present) as ¡¥Senior Cathodic Protection Engineer¡¦ (Reporting to General Manager);
„« 02.9.09 to till date: Review & making new technical documents as required for various projects in Qatar.
„« 25.8.09 to 01.9.09: Planning, coordinating, execution & report of DCVG survey on 36 inch x 9km QP new gas pipelines to QG II, III & IV in RasLaffan Industrial City, for FERNAS Construction Company.
„« 09.8.09 to 24.8.09: Review & making new technical documents as required for various projects in Qatar.
„« May 2008 to 08.8.2009: Assigned as ¡¥Cathodic Protection Site Engineer¡¦ for Cathodic Protection Sub-contractor BAC Corrosion Control - UK, at Yemen LNG Pipeline Project, for temporary & permanent Cathodic Protection systems [consisting of 135 magnesium anodes, 300 test points, 45 PRE/s & 45 Coupon/s, 10 Deep Well GB/s, 3 TRU/s, 7 TEG CP Converter/s, 20 Surge Diverter & 10 Solid State Decoupler] installation supervision / QA-QC reports, and testing & commissioning and reports (discontinued by client for requiring new T/R units from BAC-UK) on 38 inch diameter x 322km long cross country main pipeline & 30 inch diameter x 25km transfer pipeline for AMECSPIE HAWK INTERNATIONAL JV COMPANY (The EPC contractor from France), under Yemen LNG Company Limited.
Specialized Oil & Gas Engineering Company Limited, Kingdom of Saudi Arabia (October 2006 to May 2008) as ¡¥Cathodic Protection Projects Engineer¡¦ (Reporting to Branch Manager / Projects Manager);
„« As ¡¥Project Manager¡¦ & Royal Commission approved Engineer In-Charge for overall coordination with client in planning, scheduling, installation supervision, QA/QC reports documents for 104 ICCP systems to reinforcement in cement concrete for SWC Pump Station complete structure & Headwork's complete Structures, at INDUSTRIAL FACILITIES EXPANSION PROJECT 072 / C31R of Royal Commission at Jubail, for main contractor AL-HARBI Trading & Contracting Company.
„« As ¡¥Cathodic Protection Engineer¡¦ for installation supervision, testing & commissioning of 42 shallow vertical anodes for 3 ground bed at RABIGH REFINERY of Saudi Aramco, for main contractor AL-SUWAIDI Industrial Services Company.
„« ¡¥Site Coordinator as NACE Certified & Client (SABIC) approved Cathodic Protection Engineer¡¦ at site for carrying out CIPS & DCVG survey and complete report on 18 Inch x 50km Gas Pipeline from ABAQAIQ GOSP-3 to SAFCO plant. The job involved checking the potential profile along pipeline route & advising the client to make changes in T/R settings, before commencement of actual CIPS / DCVG survey.
„« Prepared Installation Procedures / QA-QC-ITP documents, Testing & Commissioning document, and at site as qualified permit receiver and installation supervision of one DWGB & one distributed SAGB works at SABIC National Methanol Company (IBN SINA).
„« Review of Saudi Aramco Engineering Specifications related to Cathodic Protection.
Middle East Engineering & Corrosion Control, Qatar (September 2005 to March 2006) as ¡¥Cathodic Protection Specialist¡¦ (Reporting to General Manager);
„« Assigned as ¡¥Cathodic Protection Engineer In-Charge¡¦ & Qualified permit receiver for Upgrade of 3 CP Stations [Transformer Rectifiers & Ground beds] at Mesaieed Operations Area - Qatar Petroleum, under field support department (Onshore).
„« Complete Annual monitoring survey data & report for Plant area / Pipelines / AGST bottom / AGST Internal / Marine dock facilities CP systems at Qatar Chemicals Company Limited - Mesaieed.
„« Pre-design survey data & report for Cathodic Protection of firewater pipelines at QAPCO - EP2 expansion project.
„« Planning, Coordination and Delivery of Materials for Sacrificial Anode CP System (Magnesium Ribbon Anodes), for under ground storage tanks (10Nos.) at American Air-base for United Electrical.
„« Review of RFQ for various CP related jobs (office based job).
„« Review of RFQ & Preparing BOQ & Pricing for DAEWOO - Lafan Refinery Project Cathodic Protection systems.
„« Investigations / Checking & Report of Marine Dock Facilities Cathodic Protection Systems at Qatar Chemicals Company Limited.
Oceaneering Inspection, Abu Dhabi, UAE (November 2004 to July 2005) assigned as ¡¥Cathodic Protection Inspector¡¦ with Qatar Gas Company, E & V Inspection Group at Ras Laffan, at Qatar (Reporting to Senior Corrosion Engineer);
„« Monitoring surveys & report, Investigations & report, coordination with maintenance group for maintenance planning and execution for Plant Cathodic Protection systems for buried pipelines / Rebar in cement concrete / AGS Tank bottom / Drain drums / sea water in-take structure [consisting of 42 Cathodic Protection T/R units, ground beds, and associated monitoring facilities].
New Era Group Kuwait Establishment, Ahamady, Kuwait (July 2004 to October 2004) assigned as ¡¥Senior Cathodic Protection Technician¡¦ with Equate Petrochemicals Company (Electrical Maintenance), Shuiaba, Kuwait (Reporting to Electrical Maintenance Engineer);
„« Associated with Second Quarter monitoring surveys & reports, investigations & report, coordination with maintenance contractor for maintenance planning and execution of plant Cathodic Protection systems for buried pipelines & tank/s bottom [consisting of 44 Cathodic Protection T/R units and associated monitoring facilities].
Corrpro Companies Middle East LLC, Sharjah, UAE (June 2001 to April 2004) as ¡¥Technical Manager¡¦ (Reporting to Operations Manager), Also responsible as Project Engineer In-charge for Detailed Engineering & Design, planning, scheduling, co-ordination with clients and supervision for execution of the following projects;
„« ¡¥As Coordinator (office based)¡¦ for getting done the feasibility study and survey for providing cathodic protection to existing complex buried gas pipelines at Oil & Gas Development Company Limited (Pakistan) at Tandoalam, Daru and Kunnar fields.
„« As ¡¥qualified permit receiver¡¦ and execution of testing, commissioning and report complete of close remote ICCP system for plant pipelines at Dubai Aluminium Company limited, in Jabel Ali (UAE).
„« As ¡¥Project Cathodic Protection Engineer In-charge¡¦ for pre-design survey & report, detail engineering & Design, coordinator for materials, installations complete, QA/QC documentation complete, testing & commissioning of 3 remote monitoring and control deep well anode ground bed (remote) ICCP systems (complete) to 2 x 64 inch diameter x 179km twin water pipelines from Fujairah to Sweihan (in Al-Ain -UAE) for Technip Al Jaber Energy services - The main contractor & consultant Fichner, Fujairah Water & Power Project under ministry of power & water directorate.
„« As ¡¥Project Cathodic Protection Engineer In-charge¡¦ for Monitoring of temporary CP Systems on 2 x 64 inch diameter x 179km twin water pipelines and report for Fujairah Water & Power Project, for Technip Al Jaber Energy services - The main contractor.
„« As ¡¥Site Cathodic Protection Engineer In-charge¡¦ for testing, commissioning and reports complete of cross country pipeline/s and plant pipelines, 6 deep well anode ground bed ICCP systems at Qatar Chemicals Company Limited - Mesaieed - Qatar, for Kellogg Brown & Root / Technip (KBRT) - The consortium contractor/s.
„« As ¡¥Site Cathodic Protection Engineer¡¦ for testing, commissioning and reports complete of above ground storage tank (AGST) bottom - 10 grid type ICCP Systems at Qatar Chemicals Company Limited - Mesaieed - Qatar, for CBI - The sub-contractor.
„« As ¡¥Cathodic Protection expert¡¦ for carrying out post commissioning investigations & report for Gas Injection Pilot Project pipelines ICCP Systems at ADCO - ASAB in Abu Dhabi (UAE), Petrotech International Company.
„« As ¡¥Project Cathodic Protection Engineer¡¦ for testing, commissioning and report complete of 48 inch diameter x 112km Maqta - Jabel Ali gas pipeline project 3 ICCP Systems at Abu Dhabi (UAE), for National Petroleum Construction Company, under the client ATHEER / GASCO.
„« ¡¥Coordinator¡¦ for carrying out post commissioning DCVG & CIPS survey and report complete of 48 inch diameter x 112km Maqta - Jabel Ali gas pipeline at Abu Dhabi (UAE), for National Petroleum Construction Company, under the client ATHEER / GASCO.
„« ¡¥Coordinator¡¦ for carrying out post commissioning DCVG & CIPS survey and report complete of 24 inch diameter & 36 inch diameter x 12km each (Detour Section) of Maqta-Taweelah gas pipelines at Abu Dhabi (UAE), for National Petroleum Construction Company, under the client ATHEER / GASCO.
„« As ¡¥Project Cathodic Protection Engineer¡¦ for testing, commissioning and report complete of 24 inch diameter & 36 inch diameter x 12km each (Detour Section) of Maqta-Taweelah gas pipelines ICCP Systems at Abu Dhabi (UAE), for National Petroleum Construction Company, under the client ATHEER / GASCO.
„« As ¡¥Project Cathodic Protection Engineer¡¦ for installation supervision, testing, commissioning and report complete of 10 inch & 4 inch diameter x 24km Pipelines ICCP System for gas supply to desalination plants, and Coordinator for Carrying-out DCVG / CIPS Survey and Reports complete, for National Petroleum Construction Company, under the client GASCO.
„« As ¡¥Site Cathodic Protection Engineer¡¦ for pre-design survey, installation supervision, testing, commissioning of ICCP System and final documentation of 24 inch diameter pipeline for supply of gas to A1 power plant at Taweelah, for National Petroleum Construction Company, under the client GASCO.
„« ¡¥As Coordinator (office based)¡¦ for completing Installation supervision, testing, commissioning of ICCP systems for OMV Kadanwari-Miano Pipelines Project in Pakistan, for Descon -The main contractor, under OGDCL - Pakistan.
„« ¡¥Coordinator¡¦ for complete purchase requisition documents & in procurement of complete Indigenous Cathodic Protection materials for pipeline & jetty ICCP systems at Chennai Petroleum Corporation Limited (CPCL) project at Nagapattinam - India, for Afcons constructions Limited - The main contractor, under consultant Engineers India Limited (EIL).
Heston Kuwait Company, Kuwait - The manpower support contractor (October 1999 to August 2000) as ¡¥Corrosion Technician¡¦ with Kuwait National Petroleum Company, Mina Al Ahamady, Corrosion & Inspection Department (Reporting to Corrosion & Metallurgy Engineer);
„« As ¡¥Corrosion Supervisor¡¦ for various routine corrosion monitoring, cathodic protection monitoring, maintenance & trouble-shooting.
„« As ¡¥Corrosion Supervisor¡¦ for testing & final commissioning of 5 deep well anode ground bed ICCP systems for plant pipelines & structures at acid gas removal project (AGRP) -Licensor process area / Sulphur handling facilities and above ground storage tank (AGST) bottom 2 grid type ICCP systems at boiler No.7 area.
Special Technical Services, Oman (January & February 1999) as ¡¥Cathodic Protection Supervisor¡¦ at Petroleum Development of Oman (Reporting to Senior Cathodic Protection Engineer);
„« ¡¥Crew leader¡¦ for Carrying-out DCVG survey & training technician/s, under pipeline maintenance contract with PDO.
Specialized Oil Services -Asahi JV, Qatar (February 1998 to August 1998) as ¡¥Cathodic Protection Technician¡¦ with Qatar General Petroleum Corporation, under the Inspection & Corrosion (MCI/2) department, Mesaieed (Reporting to Senior Coating & Corrosion Engineer);
„« Routine CP Inspection & survey of existing ICCP systems of around 1000km Oil & Gas pipelines, jetty, tank farm, etc., with about 50 CP station installation & monitoring facilities at various locations.
Unicorr Engineering (Cathodic Protection Contractor) in India (January 1998) as ¡¥Job In-charge & Cathodic Protection Contractor¡¦ with Gujarat Alkalis & Chemicals Limited, Petrochemicals, Vadodara, Gujarat, India (Reporting to Client Manager - Electrical);
„« Trouble shooting services on existing cathodic protection system of 3 x 6 inch diameter x 6.5km Methane and hydrogen (inter bonded) pipelines from Indo Nissan OXO-Chemicals Industries Ltd (INOXIL plant) to Gujarat Alkalis & Chemicals Ltd (GACL plant) at petrochemical township in Vadodara, Gujarat.
Unicorr Engineering (Cathodic Protection Sub-contractor) in India (September 1996 to May 1997) as ¡¥Project In-charge & Cathodic Protection Sub-contractor¡¦ with Skoda Export Company Limited, at Indian Oil Corporation Limited (IOCL) Kandla Bhatinda Pipeline Project New Delhi, India - The main contractor (Reporting to Client Construction Manager & Project Director);
„« Installations, QA/QC reports, testing & commissioning of complete ICCP Systems to 375km long section of cross country pipeline from Rewari in Haryana to Bhatinda in Punjab, and station area ICCP systems complete on lump sum contract [INR: 5200,000 awarded & INR: 3800,000 paid], under QA/QC inspections by representatives of pipeline owner (IOCL) and consultant (EIL) with main contractor (Skoda Export Company Limited).
Unicorr Engineering (Cathodic Protection Sub-contractor) in India (June 1995 to August 1996) as ¡¥Project In-charge & Cathodic Protection Sub-contractor¡¦ with Corrosion Control Services (B) Private Limited - The Turn-key CP Contractor, at Indian Oil Corporation Limited (IOCL) Kandla Bhatinda Pipeline Project New Delhi, India - under Skoda Export Company Limited- The main contractor (Reporting to General Manager / Managing Director & Client Construction Manager);
„« Installations, QA/QC reports, testing & commissioning of complete ICCP Systems to 112km long section of cross country pipeline from KOT in Rajasthan to Salawas in Rajasthan, and station area ICCP systems complete on lump sum contract [INR: 2000,000 awarded & INR: 1600,000 paid], under QA/QC inspections by representatives of pipeline owner (IOCL) and consultant (EIL) with main contractor (Skoda Export Company Limited).
Unicorr Engineering (Cathodic Protection Sub-contractor) in India (February 1995 to May 1995) as ¡¥Cathodic Protection Consultant¡¦ with Mitcorr Services, Vadodara, Gujarat - The Cathodic Protection maintenance contractor, at Gas Authority of India Ltd., Delhi & Noida Region India - HBJ Gas Spur lines - monitoring & maintenance of Cathodic Protection systems (Reporting to Reporting to Owner Dy. Manager - Electrical);
„« Complete cathodic protection systems monitoring surveys, recommendations, report for HBJ consumer pipelines (200km) around Delhi - Noida region for and installation of one remote anode ground bed ICCP station at Indian Oil Corporation Limited in Panipat, with complete manpower support services.
Unicorr Engineering (Cathodic Protection Contractor) in India (May 1994 to November 1994) as ¡¥Project Cathodic Protection Engineer & Cathodic Protection Contractor¡¦ with Indian Petrochemicals Corporation Limited, Maharashtra Gas Cracking Complex in Nagothane, Maharashtra, India - under Pipeline Division (Reporting to Manager - Pipelines);
„« Annual Rate Contract [INR: 300,000 awarded & INR: 300,000 paid] for daily / fortnightly / monthly and quarterly monitoring, interpretation of data and submission reports with recommendations to client, carrying out preventive maintenance schedules, repairs and replacements works on the 175km cross country pipelines ICCP systems consisting of 7 CP stations and associated monitoring facilities.
Unicorr Engineering (Cathodic Protection Sub-contractor) in India (September 1991 to April 1994) as ¡¥Site In-charge¡¦ with Electro Corr Damp Private Limited, Mumbai - The Cathodic Protection Contractor, at Indian Petrochemicals Corporation Limited, Maharashtra Gas Cracking Complex in Nagothane, Maharashtra, India - under Pipeline Division (Reporting to Manager - Pipelines);
„« Annual Rate Contract [INR: 160,0000 awarded & INR: 160,0000 paid] for daily / fortnightly / monthly and quarterly monitoring, interpretation of data and submission reports with recommendations to client, carrying out preventive maintenance schedules, repairs and replacements works on the 175km cross country pipelines ICCP systems consisting of 7 CP stations and associated monitoring facilities.
„« Carrying out Pearson Detection survey and report for 150km onshore pipelines.
Corrosion Control Services (B) Private Limited, Mumbai (June 1988 to August 1991) as ¡¥Senior Cathodic Protection Technician¡¦ (Reporting to Managing Director) responsible for planning, scheduling, co-ordination with clients, execution and / or supervision for execution of the following projects;
X-Ray Engineering India Private Limited, Mumbai (January 1987 to June 1988) as ¡¥Cathodic Protection Supervisor & Corrosion Technician¡¦ (Reporting to Technical Services Manager) responsible for planning, scheduling, co-ordination with clients, execution and / or supervision for execution of the following projects;
ECD Electrons & Electrolysis Private Limited, Mumbai (January 1985 to December 1986) as ¡¥Technician¡¦ for Cathodic Protection works (Reporting to Director) responsible for execution and / or supervision for execution of the following projects;

EDUCATIONAL QUALIFICATIONS
1. Passed Secondary School Certificate Examination from Pune Divisional Board in March 1977.
2. Completed Higher Secondary Certificate Course (Science Stream) at Vani Vidhyalaya Junior College at Mulund in Mumbai from 1978 - 1980.

TECHNICAL QUALIFICATIONS
1. Passed Wireman Apprentice Certificate from Indian Technical Education Society - Mumbai.
2. Passed Wireman Trade Certificate from Indian Institute - Mumbai.
3. Passed Electrician Trade Certificate from Indian Institute - Mumbai.
4. Passed Wireman License Exam of Electricity Directorate in the State of Bahrain.
5. Completed Diploma Level Correspondence Course in Electrical Engineering from Hindustan Institute of Engineering Technology - Madras, India.

PROFESSIONAL QUALIFICATIONS
1. MICorr professional grading certificate # 937 from Institute of Corrosion - UK.
2. NACE International The Corrosion Society - USA Certified 6523 Senior Corrosion Technologist.
3. NACE International India Section, Corrosion Society of India Certified Qualification in Cathodic Protection.
4. NACE International India Section, Corrosion Society of India Certified Qualification in Paint Coating & Lining Inspection.

PROFESSIONAL AFFILIATIONS
1. Individual Senior Member (124924-00) of NACE international The Corrosion Society - USA.
2. Life Fellow Member of SAEST (Society of Advancement for Electrochemical Science & Technology) India.
3. Life Member of Corrosion Society of India (NACE International India Section)
4. Professional Member (204532) of Institute of Corrosion - UK.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2401 to 2450 of 7051)

Go to Search Parameters...

Brief Description

I am smart Lithuanian male, strong wide profile IT specialist with more than 15 years related experience and searching for the position in IT sector, where my experience and strong background in computer science can be best utilized. My main personal qualities is: calm, disciplined, communicable.

12 years oil&gas experience geologist& mudlogger,8 years environmental scientist, MS&BS Degrees in Geology, recent education includes 32 semester hours of business and computer courses, 1989&90, 3.7GPA, 20 semester hours of graduate courses in environmental science, 1997, 4.0GPA

Aspen 12.1, Pro II, HYSIS, DMC, CONTROL STATION

DCS/CONTROL ROOM/PRODUCTION/PROCESS OPERATOR

I've 16 years experience in oil and gas field as mechanical engineer with Sonatrach oil & gas company and as maintenance mechanical supervisor with ADMA-OPCO Offshore AbuDhabi.

Experienced Directional Driller

Results-driven and well-organized Engineering Professional able to combine a unique blend of formal technical education with a solid, hands-on background in the Consulting and management industry.

I am a graduate in Polymer/chemical Engineering. My willingness to work hard is evident from the fact that I hold professional experience of 4 years in Polyurethane & fibre reinforced plastics in all aspects of Processing, Production & quality.

Piping engineer in oil and gas

My name is Onah Bethrand chukwuka,a drilling/completion fluids engineer with both local and international training and certification. I have good experience in both offshore, swamp and land drilling fluids engineering services.

Chemical engineer with 4 years experience in simulation applications like UniSim Design (HYSYS), HTFS,etc and industrial production experience

I have 10 years working inspection experience (7 Yrs at Middle East and 3 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, RT Film review, QA/QC, MECHANICAL EQUIPMENTS AND PAINTING JOBS (QA/QC activities, inspection, supervision & coordination), in large international m

Professional B.S. in Mechanical Engineering, with 18 years of experience at production fields in onshore and offshore areas and Power Generation Facilities. Turbomachynary and Rotating equipment, performance diagnosis, nondestructive inspection techniques, asset management and RCM

Admisnistrador de sistemas,Systems Administrator,Ingeniero de Sistemas,Systems Engineer,Ingeniero de Software,Software Engineer,Ingeniero Telecomunicaciones,Telecommunications Engineer,Project Manager

Experienced in design of electrical, instrumentation, and control systems. Experienced in Intools-SPI, heat trace, SKM, PLC, and DCS, Delta V design

Electrical/Automation/Controls Enginer

Mechanical Engineer with Masters (M.E) in CAD and with One Year of Static Equipment Design experience in FACT ENGINEERING AND DESIGN ORGANIZATION (FEDO), India and one year and four months experience in Inspection of Storage Tanks and Pressure Vessels.

B.E., Mechanical Engineering with an Aggregate of 70.02%-(2000-2004)

Nuclear Engineer in process reactor specialist. Have ISO 9001 and other certification.

Certified Internal Auditor, international auditor

Chief elecrician !!!

Talented ¡¥Senior Corrosion Engineering & Control Professional, Specialized in Cathodic Protection Technology Services¡¦ with extensive background in Project Engineering, Construction Management, Maintenance Management & Specialized Surveys at Oil, Gas, Petrochemicals, Power & Water S

Attorney specializing in Land and Oil/Gas Law

Mechanical Engineering Technologist

Well logging, seismic data interpreting, sea mapping

Work History in brief: Hay Engineering Ltd - 1985-89 Sedco Forex - 1989-94 Retsco Intenational - 1994-99 Finnco Ltd - 1999-2000 Transocean Deepwater drilling - - 2000-2003 BP-CNOOC - - 2003 - present.

Experienced Cad Manager. Primary system experience in Autocad, Multisuite, Autoplant, CadDuct, ADT33. Other systems experience in MIcrostation, PDMS, Prime Medusa. An engineering background in Structural/Civil.

Bachelors in Technology - Chemical Engineering – 14 years performing works on: Hysys, Pro-ii, Pipe Phase, Sinet, AutoCAD, AutoLISP, Micro-Station, 3Dstudio Max, Primavera, MS-Project and MS-Office products

Objective To provide solutions that will maximize productivity and profits Status

33 years in various survey disciplines. 21 years onshore and offshore experience in hydrographic, engineering & seismic survey (hands-on surveys), & more currently in the last 13 years, navigation QC and Project Management.

The last 8 years I have been working mostly in Asia in Instrument and Metering engineering and Process Supervisor positions. I am experienced in working with Nationals and using CBTA on the job training and assessment methods. I currently have a valid BOSIET certificate.

Industrial and Heavy Equipment Technician

25 years experience operator / contractor experience willing to relocate status: single

Looking for work as an instrument tech. in the oil industry.

21 years in oil & gas From Insp Eng to welding inspector Exp on new and in-service plant QA/QC & clients rep on jacket & module fabrication Senior insp sub-sea pipelines, offshore platform hook-ups Insp Eng and plant insp on oil & gas platforms Familiar with most intl. codes & standards

Interrested in rotational international opportunities in Maintenance Management or Senior Maintenence Planning positions

GIS Professional with an excellent background in Geomatic and engineering work. GIS experience included pipeline route planning utilizing GIS/DSS, land use changes utilizing GIS/RS data, advanced RS researches using Airphotos, Hyperspectral image analysis.

Electronics / Electrical Technician

24 years in Pipeline Construction, Operation, Inspection, Precommissioning and Commissioning both Onshore and Offshore

I am a Canadian citizen having 17 years solid building construction, Civil and structural design, quality Management, project management, construction Management. a dedicated team player/leader exhibiting a high level of energy and initiative under pressure.

Please see resume for full details. Thank you

Over 26 years experience, 16 of which are with major foreign oil companies employment in specialized gas field operations which have included pre-commissioning and commissioning activities in the onshore and offshore Oil and Gas industry.

to secure a responsible position as an electrical engineer.

Naval Architect with 6 years Experience of which 4 years in Indian Navy.

A motivated and experienced OIM/Superintendant/Supervisor, accustomed to tight budgets in an innovative atmosphere.

18 years of experience in respective fields

Senior Electrical Engineer , MEP Manager

15 years of utility/specialty chemical management experience.

. I have strong leadership skills and proven ability to manage and motivate a team to achieve assigned results. Through my previous jobs, I have learnt to provide and maintain consistent high standards and service.

Structural Designer With 9Yrs. PDS,Microstation & Autocad Experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 [ 49 ] 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out