Resume - Senior Plant Inspection Engineer. Mechanical engineering graduate with 29 years ...

Misco Jobs

Resume #87262

CONTACT INFORMATION:
View contact information...

Date of Birth: 13th December 1959
------------------------------------------------------------------------------------------------------------------------------- -----------
Nationality: Indian
-----------------------------------------------------------------------------------------------------------------------------------------
Education & Qualifications
B.E. (Mechanical), University of Roorkee, now re-named as
Indian Institute of Technology (I.I.T.) Roorkee, India - 1980
in 1st division (with Honours)
------------------------------------------------------------------------------------------------------------------------------------------
Career Objective:

I am seeking a rewarding and long lasting assignment to utilize my 29 years of experience in the field of Process Plant Inspection, Materials Inspection, Corrosion, Failure Analysis, Non Destructive Techniques, Fabrication/ Welding inspection in running process plants as well as new grass root projects.

Employment Record:

Period Organisation Responsibility
November 1993 to present -
Senior Plant Inspection Engineer (Acting)
Bahrain Petroleum Company (BAPCO), Refinery unit,
Bahrain
(100% owned by Bahrain Govt. ; Earlier a joint venture company between Caltex & Bahrain Govt.). * Process Plant inspection (Shutdown + On stream) of refinery static equipment like heat exchangers, columns, vessels, furnaces, lines and fittings etc.
* Material Inspection of incoming material.
* Fabrication, Installation & welding inspection of new grass root projects such as Hydrocracker,
Sulphur recovery, Hydrogen, RGDP & LBOP Projects.

April 1989 to November 1993 -
Senior Engineering Officer National Organic Chemical Industries Ltd. (NOCIL), Mumbai, India, Naphtha Cracker Petrochemical Plant (Royal Dutch/Shell Group Co.) * Process Plant Inspection( Shutdowns + On stream ) of
Naphtha Cracker Petrochemical Plant's static equipment like heat exchangers, columns, vessels, furnaces, lines and fittings etc.
* Fabrication stage wise inspection of new equipments procured.

Dec. 1980 to April 1989
Senior Engineer Engineers India Ltd (E.I.L), a premier engineering & consultancy organization * Construction supervisor/Inspection of process piping in new grass root projects such as offshore oil platforms, refineries and petrochemical plants.

Area Of Particular Expertise:

* Process Plant Inspection of static equipments like heat exchangers, columns, vessels, furnaces, lines & fittings etc. in refinery/petrochemical plant.
* NDT methods like radiography, ultrasonic, magnetic particle, dye penetrant examination, interpretation of weld radiographs, hydro & pneumatic testing, positive material identification using nuclear analyzer.
* Welding procedures for carbon steel, alloy steel, stainless steel, duplex stainless steel, Monel, Al- Bronze, Cu-Ni etc.
* Material inspection on incoming material such as pipes, tubes, fittings, valves, plates, bars etc.
* Fabrication/installation, inspection of piping of new grass root refinery/offshore platform/petrochemical projects involving material identification, welding, hydro/pneumatic testing etc.
* Fabrication/welding inspection of pressure vessels at vendor's shop.
* Familiar with various International codes & standards such as ASME, ANSI, API, ASTM.

Professional Experience Details:

1. Bahrain Petroleum Company (BAPCO), (Refinery), Bahrain:

Nov.1993 to Present:

Senior Plant Inspection Engineer (Acting) of Low Sulphur Diesel Production Plant (LSDP) consisting of i) Hydrocracker plant ii) Sulphur Recovery plant & iii) Hydrogen Plant at Petroleum Refinery + additional charge of upcoming new grass root Lube Based Oil Project.

1.0 Nature of Duties:

1.1 Process Plant Inspection:

* Inspection & testing of static equipments such as heat exchangers, columns, vessels, furnaces, lines & fittings, during shutdowns as well as on stream.
* Specify scope of inspection, provide short-term as well as long term recommendations regarding repairs & replacements.
* Issue inspection work lists detailing the methods of repair, materials to be used, fabrication methods, specify welding procedures/NDT methods/heat treatment, quality control & test procedures.
* Checking & approval of the quality and correctness of construction and repair work.
* Checking and verification of the equipment minimum allowable thickness (MAT), corrosion rates, service life estimation, determination of rejection limits and take corrective action accordingly.
* Maintaining history of individual equipments, updating inspection and repair records including data, anticipated repairs, and thickness readings.
* Monitoring corrosion conditions, evaluation of material performance in corrosive systems, failure investigations, root cause analysis and recommend up gradation of material.

1.2 New Grass Root Projects:
Low Sulphur Diesel Production Project (consisting of Hydro cracker, Sulphur Recovery & Hydrogen Plants) & Refinery Gas De-Sulphurisation Project.

* Piping material identification including positive material identification (PMI) using Nuclear Analyser at three stages i) incoming material ii) fit up stage & iii) PMI for welds.
* Welder Procedure qualification tests.
* Monitoring quality of welding for carbon steel, alloy steel, stainless steel, duplex stainless steel etc, heat treatment, Non destructive testing – Interpretation of weld radiographs, witnessing dye penetrant tests and ensuring ultrasonic initial gauging etc.
* Piping fit up inspection and visual inspection of all shop & field welds.
* Preparation of punch lists for piping packages, ensuring that all the welds are visually inspected, NDT such as radiography, D.P, M.P.I., PMI & PWHT requirements are complied with spec requirements.
Confirmation of punch list items upon their completion.
* Witness hydrotesting of new valves, pop up tests for relief valves & hydro/ pneumatic test for piping systems and heat exchangers including fin fan coolers.
* Certification of handover packages.
* Inspection of furnaces/ Reformers/ stacks/ incinerator during site fabrication/ installation. Inspection included fit up, welding inspection of tubes/ structural works/ field welds of stacks/ incinerator. PMI of tubes and welds & hydrotesting of furnaces/ reformer tubes.
* Refractory inspection.
* Visual inspection/ PMI of ring type gaskets and flange mating surfaces after lapping.

1.3 Quality Control on Incoming Materials:

* Handling all material department and vendor's queries concerning materials and equipment specifications and other requirements.
* Review of vocab (ordering) descriptions, correct and update them in line with changes in codes and standards on a continuous basis.
* Inspection of company wide incoming materials for physical condition and compliance with specification and standards. This consists of review and verification of test certificates, their physical verification and positive material identification (PMI) of all alloy materials using Nuclear analyser.
* Assessment of supplier's fabrication/ manufacturing facilities.
* Evaluation and verification of material quotations from suppliers for technical part.

2. National Organic Chemical Industries Ltd. (NOCIL), Mumbai, India (Royal Dutch/ Shell group Co):

April 1989 to Nov. 1993:

Senior Engineering Officer at their Petrochemical plant in Specialist Services Department – Static Equipment Section (Process Plant Inspection Department) (Naphtha Cracker and EO/EG Plants).

2.0 Nature of Duties:

* Inspection of process plant equipments and piping during shutdowns as well as during service using Non Destructive Techniques, provide short term as well as long term recommendations regarding repairs, replacements. Carry out inspections during and upon completion of repairs.
* Preparations of inspection procedures & manuals.
* Corrosion monitoring using conventional techniques, service life estimation and determining rejection limits.
* Failure investigations, root cause analysis and technical recommendations to improve integrity and reliability of equipments and components.
* Selection of materials for new projects, improving existing material specifications as a service function to design and materials department.
* Inspection/Review of test certificates for materials procured by Materials Department.
* Contribute to the preparations of shut down work lists.
* Maintain a record system for process equipments and relief valves.
* Sizing and selection of relief valves.
* Inspection of Naphtha Cracking Furnaces during revamp, shutdowns, repairs and their failure analysis.
* NDT examinations such as Radiography, Ultrasonic, Magnetic Particle and Dye Penetrant.
* Welding, Hydrotest and Pneumati c test inspection.
* Stagewise inspection at outside fabrication suppliers' shops whenever new equipments are procured.
* Assessment of supplier's fabrication/ manufacturing facilities.
* Stagewise inspection of re-conditioning of valves.

3. Engineers India Ltd. (E.I.L.):

December 1980 to April 1989:

Senior Engineer in their Process Piping and Equipment Department (Construction Division) at various projects as outlined below:

a) Mathura Refinery Project of Indian Oil Corporation.

b) Offshore Oil Platforms for Oil & Natural Gas Commission (ONGC) at following locations:
i) Mazagaon Dock Ltd, Bombay ii) Hyundai Heavy Industries Ltd., South Korea iii) Korea Heavy Industries Ltd., South Korea as Site Incharge iv) Offshore Bombay High and South Bassien Fields c) Maharashtra Gas Cracker Complex of Indian Petrochemicals Corporation Ltd.

3.0 Nature of Duties:

* Review and approval of the drawings and inspection procedures required for the project.
* Determination of total workload, planning, scheduling and monitoring the project for timely completion.
* Approval of the deviations from the specifications during project implementation.
* Ensuring completion of the job as per specifications. This includes inspection of materials procured, mechanical/ welding clearance of the lines, NDT examinations such as Radiography & Dye Penetrant etc,
Certification of hydro/ pneumatic testing of piping etc.

Professional Certifications:

i) ASNT Level II in Radiographic & Magnetic Particle Techniques.
ii) Interpretations of weld radiographs conducted by ISNT (Indian Society of Non Destructive Testing).
Duration – 5 days iii) Certification course for Welding Inspectors conducted by Advani Oerlicon Institute, Bombay. Topped in the exam. Duration – 5 days.

Additional Information:

Accustomed to working in highly computerized atmosphere.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 7040)

Go to Search Parameters...

Brief Description

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Well-developed interpersonal skills.

Senior Process and flow assurance engineer with full project cycle experience.

I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary

Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5

I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model

Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.

Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..

Free! I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.

Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway

Drilling exploration production, per cv below

B.E. (Mechanical) - 1980

Petroleum Engineer with 26 years of professional experience mostly in Production Engineering. Spanish and English fluent speaker. Artificial lift, workover and well service recommendations. Well Completion programs. Well testing. Field Evaluation and Production Optimization.

30 + year mud engineer, experienced in all phases of drilling fluids & BOP.

I have more than 17 years experience in exploration and development domains. During my career, I have explored for hydrocarbon in the Algeria sedimentary basins. North Sea Norwegian sector, Libya and now I`m working in Canada for Fugro-jason.

23 YEARS EXPERIENCE IN PETROCHEMICALS -PROJECT , OPERATIONS ,ERECTION ,COMMISSIONING

Seasoned and versatile process engineer (Oil & Gas, Refining) seeking a Process Engineering position that utilizes my analytical and communication skills to enhance organizational growth and profitability.

Project management, Coordination with End User/ Vendors/Contractors/Consultants, Progress monitoring& reporting, Supervision, Quality/Safety assurance and Tender documents

Professional API 510 and AWS CWI Inspector

With thirty years experience in the workforce in industries such as oil & gas, mining, fabrication/construction, and marine engineering, I have a very strong mechanical aptitude in all disciplines and a strong commitment for OHSE having started with my apprenticeship as a Mechanical fitter/1st class

Petrophysicist

Over 15 years of experience in Instrumentation Engineering, Procurement, Construction, pre-Commissioning and commissioning of projects

Highly skilled and experienced Sr. Drilling Engineer, experience with land/offshore (including deepwater), having worked as Drlg Engineer through Drilling Engineering Supervisor for a large scale GoM deepwater developement project.

20 years experience in drilling/work

Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP

Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering

B.E.(Mechanical); 22 Years total Industry Experience; Served with SABIC, Reliance, SPIC & Shell;

More than twenty (20) years experience in the field of Engineering Construction in

A professional, well-qualified MECHANICAL ENGINEER with extensive project management experience in the oil refining, gas, LNG/LPG, petrochemical and associated industries.

Senior Plant Inspection Engineer. Mechanical engineering graduate with 29 years of experience in Oil/ Petrochemical industries loking after Process Plant Inspection, Materials Inspection, NDT, Corrosion, Failure Analysis, Fabrication/ Welding inspection in running plants + new grass root projects.

Geologist, Heavy Oil and Oilsands. Experienced consultant, prospect generator, horizontal well planner for thermal and CHOPS applications.

I have 22 Years of experience in the Detailed Design and Engineering in the areas of Plant Design & Piping for Oil & Gas, Petrochemical, Chemical and Power Projects. I am presently working as a Head Piping.

With 20years O&G experience, my main experience has been on major projects during design. I have experience within Operations, Construction and Commissioning and also worked on site; offshore, pipeline construction and FPSO shipyard construction. I have Australian and British Citizenship.

Dedicated professional in Exploration and Production with 27 years experience working for the two largest major Oil Services Companies. Strong engineering background in Drilling and Completion Fluids as well as Drilling Waste Management through years of focused operational management.. Strong engi

Drafter & Designer experience in estimation and designing of transmission lines and poles. Facilitated department meetings for administration of projects. Have worked the industry for twenty-five years and have obtained a Bachelors of Science degree in, Business Administration. Ability to prioritize

Profile: A Specialist Seismic Interpreter with over 15 years experience in Oil & Gas exploration, in seismic interpretation and prospect generation. Having the ability to supervise seismic processing and acquisition activities and take on role as a Project Manager. Confident in ability to cont

Working with Transocean as a Drilling Manager in Integrated services Project started for 5 Jack up rig for Bombay High field with client -ONGC. Operation commence in Jan 2007.

Drilling Engineer offshore tender rigs jackups onshore land rigs

process engineer

a senior instrument & Controls engineer

Sr Piping Designer Oil & Gas 3D model

Senior Planner with more than 20 years experience in Oil & Petrocehmical Industries

Qualified professional Project Manager and licensed US chemical engineer, with 32 years oil and gas and refined products production and processing facilities, pipelines, stations and terminals.

Piping Engineer/Designer

Presently working as Drilling Manager with Transocean started up the project in India for 5 Jackup rig for ONGC along with Tony Flynn who was than our GM -Integrated services in May 2006. Direct responsibility is managing T12 and JTA ( 300' Jackup)on day to day coordination, planning and execution

AutoCAD drafting, Drawing, Painting (Acrylic, Oil, Water Color), Airbrushing, Faux Finishing, Murals, and Computer Graphics /Illustrations. Software: Adobe Illustrator, Adobe Photoshop, Adobe Streamline, Adobe 3D, Flash, Fractal Painter, Quark Xpress, Microsoft Word, Power Point and various scanning

Instrumentation, Control and Safety Systems Design Engineering - Projects

A Professional Engineer with over 18 years' experiences in Process Control Systems for the design, development & implementation of process control applications, oil storage, movement & blending applications and process training simulations. Extensive knowledge in Honeywell Distributed Control System

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out