Resume - NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

Misco Jobs

Resume #87453

CONTACT INFORMATION:
View contact information...

Summary

Global Corrosion Engineer/Chemical/Mechanical consultant manager, with 30 years of broad quality oversight for major process capital equipment, field mechanical integrity reports, DOT chemical shipping classification, electrochemical analyses and R& D process engineering compatibility issues. Working knowledge of API, ASME, and NACE engineering codes. Well trained in leading failure investigations, extending the life of chemical processes, establishing new purchasing engineering standards and eliminating the effects of costly corrosive agents thereby improving processes and savings millions of dollars. Experienced in dealing with hundreds of different corrosive liquids and gases.

* Saved Hercules $ 6.7 MM over 3 years through improvements in materials handling, rotating equipment design, and dryer construction changes.

* Saved $ 32 MM over the last 10 years through projects this extended the life of capital equipment, eliminating costly field process failures, and by improving product quality for both Colgate Palmolive and Hercules.

* Certified by NACE International &CESB as a Corrosion Specialist, Materials Selection Design Specialist and Sr. Corrosion Technologist.

Professional Experience

Sr. Staff Engineer at Hercules Inc. July 2006 – July 31, 2009 (3 years 1 month)

* Saved $ 1.2 MM through the alteration of materials handling of cutter blades which eliminated compound fretting fatigue. This project reduced the chance of catastrophic failure of a cutters by practically 100%

* Conducted failure analysis of critical processing mixer leading to redesign by engineering vendor eliminating blade tip fatigue and process shutdowns saving $ 2.0 MM.

* Led international team in the investigation of two failed coiled serpentine heat exchanger dryers to determine the root cause of the failures. Dimensional modifications were made to one dryer while the other needed an upgrade in materials of construction and welding procedures at a cost savings of $ 2.5 MM.

* Extended the life of critical Kymene reactors to allow for continued operation without replacement saving $ 1.0 MM.

* Revised corporate engineering standards to bring them up to date including, FRP composite construction, Coatings and Linings as well as revision of welding methodology specifications.

* Managed corrosion lab studies and interpreted compatibility parameters for R&D and field engineers.

* Crafted materials engineering specifications for sales organization.

Sr. Engineer Colgate Palmolive Co. November 1984 – November 2004

* New formulated super fatted soap dryers developed pitting corrosion after 3 years of service. A failure analysis and several plant inspections were conducted. Recommended higher throughput velocities and materials of construction upgrade from 316 SS to Al6XN saving $ 2 MM.

* Spray detergent towers around the globe were experiencing pernicious internal corrosion Made several trips to South America to internally inspect the towers. The towers were experiencing condensation corrosion at the explosion door level mid way up. Made recommendations to shore up tower with new internal fillet welded carbon steel plate and additional insulation to prevent continued condensation corrosion saving over $ 5 MM worldwide.

* Inspection of Glycerin recovery evaporators in Brazil revealed stress corrosion cracking after 5 years of service requiring a change in material of construction. Recommendation was made to change metallurgy to 2205 duplex alloy. The evaporators were repaired with this alloy with no further corrosion issues around the globe saving $ 7 MM

* High Speed Rotary valves in abrasive toothpaste formulas were experiencing erosion pitting corrosion around the world. Made recommendation to machine new valve out of Nitronic 60 alloy. This resolved the erosion issue and eliminated the chance for metal contamination in toothpaste saving $ 2 MM worldwide.

* Resolved a Dual laminate FRP tank failed in hypochlorite service in Europe. Moved away from lined FRP to cross-linked HDPE saving $ 1 MM.

* Led a global team of packaging engineers and scientists in resolving critical Soft-soap Pump Springs crevice corrosion by testing and reformulation eliminating the issue with a worldwide saving to the business of $ 10 MM.

* Developed an eight-hour informative Corrosion course on engineering materials and chemistry. An overview of significant company corrosion issues and solutions was given. It included sections on materials selection, engineering design, corrosion testing and a how to checklist for plant corrosion inspections.

* Developed a Materials Engineering corrosion database that was used extensively by engineers and the manufacturing plants to select materials of construction for Colgate Palmolive co. saving $ 5 MM worldwide.

FMC- Metallurgical Corrosion Engineer 1981-1984

Failure analysis of machine parts and corrosion studies for FMC that included fractography, metalography, and corrosion testing. Work centered on aluminum alloy selection for the Army fighting vehicles including the Bradley.

EDUCATION/PROFESSIONAL DEVELOPMENT

Wayne State University, Detroit, Michigan. BS Material Science& Engineering, Chemistry Minor. Completed numerous ASM and NACE professional development courses. Completed UCLA extension course on Electrochemistry and uses for corrosion testing. Failure Analysis courses were taken and completed through the Society of Professional Advancement. Participated in NACE annual corrosion society meetings and section meetings for over 25 years while obtaining all NACE certifications.

OBJECTIVE:
------------
Looking for a varied assignment corrosion engineering job. Looking after mechanical integrity, corrosion control, failure analysis, chemical inhibition and monitoring, project engineering work.
------------

ADDITIONAL INFORMATION:
------------
U.S. citizen, enjoy golf, swimming, traveling, and reading.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 6998)

Go to Search Parameters...

Brief Description

I'm a team player and very active in searching for work that I can do in order to help the team to meet schedule.I know how to use PDS, Microstation, Smart Plant Review and Autopipe.I'm willing to learn/discover new things that are related in my work and willing to be train if the oppurtunity comes.

Hi, I am Santosh Kumar Addagatla, graduate from Texas A&M University Kingsville with Masters in Chemical Engineering. I have 1 yr professional work expreience and hands on expreience with many modeling softwares and dealing with clinets and vendors. Autherized to work for any Employer.

tecnico en ing. electrica con experiencia en el area petrolera ( refinerias subsidiarias de exxonmobil ) conocimiento en safety bajo las normas de seguridad aplicadas por exxonmobil.experiencia en mantenimiento de sistemas de control y automatizacion de motores electricos ,

Performing NDT in Carbon steel, Stainless steel, Ni-Cr materials as per ASME SEC V. RT in Pressure Vessels and Boiler with heavy wall thickness. Familiar in Radiographic techniques Panoramic, DWDI, DWSI in pipes and SWSI in plates. Liquid Penetration Testing in weld metals, Evaluation and Reco

BE Instrumentation Looking for Automation Job

I have bachelors degree in chemical engineering from a reknown university in Nigeria, Africa. I have a strong working experience background from an oil and gas company in Nigeria where I was trained to be proficient in equipment sizing, use of hysys, FEED, basic and detailed engineering, etc.

Piping engg with 4 yrs knowledge of pdms administrator

I, Naitik Shah , a recent graduate from University of Florida did my Master¡¦s of Science in Industrial & Systems Engineering. I am interested in exploring opportunities with your company in the area of Industrial Engg where I can utilize my Masters education and relevant internship experience.

Joined FOCUS ENERGY LIMITED AS G.T.E in OIL & GAS EXPLORATION Division on their DEEP DRILLING RIG ZJ 70, JC 40 in the Rajasthan area at Jaisalmer.

Energetic, degreed and experienced Safety Professional seeking expat position in E/P field. I am well versed in driving down incident rates and educationg the work force. I am a firm believer in delivering required HSE training, coaching and monitoring results. I believe in accountability of each wo

Since Sep 2006, Well Site Geology and Mudlogging

from last 5 years working as protection engineer in high voltage AC.

Instrument engineer with experience on EPC projects and CMMS activities

Having 5 years of Professional Experience

12 years experience in industrial and general maintenance field.

Drilling Engineer / TourPusher

B.Sc. in Civil Engineering from BUET, Dhaka, Bangladesh having 10 years of experiences as a practicing engineer particularly with consulting and construction works. working experience with national and international consultants.worked in Road,bridge,subsoil investion an glycol gas plant project

Electrical/Instrument Construction-Field Eng, 25yrs+ on/offshore oil & gas project experience.

Structural engineer

Drilling Engineer, 14 years experience in drilling / supervision on Algerian oil & gas fields. Database administration skills.

Qualification: Bachelor of Science geology,(Hons) Computer skill, computer logging unit,, well site engineer drilling and logging, geological samplings, oil and gas evaluation interpretation and correlation of type of logs, daily preparation of reports, stratigraphic correlations

6+ yrs. experienced in Tankage Mech. Fabrication & Construction Engineering

I am a AWS-CWI (Certified Welding Inspector) with ASNT Level-II Certificate (RT, UT, MPT, LPT) and BGAS-CSWIP GRDAE-II. I have 6 experience. Three year experience in offshore project and three year onshore project.welding inspection and Quality control experience in reputed companies like Hyundai

Instrumentation engineer.Have been working with various companies viz ABB,EMERSON etc in Installation, commissioning ,after sales support,Project management etc.Specialised ANALYSER ENGINEER.

Completed my Masters of chemical engineering , i have an expereince of two plus years in process engineering.

MECHANICAL+2YEAR APPRIENTIC SHIP IN ROTARY EQUI PMENT

6 years of experience in Process Plant Automation• System Integration of DCS, PLC, SCADA & other Sub systems.

6+ years experiance

4 years of experience as a Process & Operation Engineer in the oil refinery, food processing and pharmaceutical industries.

An Instrument & Control System Engineer in the Petrochemical Industry with management and hands-on experience driving plant enhancements, maintenance, upgrades in processes and controls, Project Management, and vendor negotiations.

Eleven (11) years of very sound technical proficiency as a Sr. Piping Designer / Piping Designer in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area¡¦s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping stations

Facilities Project Engineer - Oil/Gas

Chemical engineer. 19 years experience in ammonia, syngas, Hydrogen, HyCO Plants

A Bachelor of Science in Electrical Engineering and a Bachelor of Science in Mechanical Engineering graduate, a license Electrical Engineer with over 18 years experience in power plant operations, testing and commissioning of coal fired thermal power plant and nuclear power plant.

Having 15 years of extensive experience for Planning & Scheduling work in Petrochmeical & Oil Industry.

Analyser engineer with 15 years experience

Experience in the field of piping-oil and gas refinery,chemical plants,working with mnc

B.Sc in mech. engineering, more than 15 years experience in the field of water desalination and power generation.Contract administration, material procurement, inventory control, operation and maintenance of steam/gas turbine, boilers and associated equipments.

Triconex Engineer with 15+ Years Experience.

I am basically an Instrumentation Engineer from India, I have worked in the field of process industries in India. I am working in saudi Arabia as control system engineer. I have worked with BMS, Scada, DCS, CCMS control systems. Also I have worked for the installation of UPSs of 1KVA to 500KVA UPSs

12 Years experience in Design & Detailed Engineering of Piping Systems for FPSO, Fixed Platform, Oil & Gas, Refinery, Petrochemical & Fertilizers plants . Currently working in Hyundai Heavy Industries (HHI) in South Korea as Manager (Piping).

11 years working as NDT& Welding Inspector , highly familiar with : ASME, API, ASTM, ANSI and AWS D1-1 codes and standard.

•Installation, loop checking, Commissioning and maintenance of online Analyzers

Mechanical engineering (heat and fluids)

Senior QA/QC Engineer & Welding Engineer with M/s.Babcock Borsig Service. Having well experience with EPC Projects, Fabrication works, Shutdown jobs, Refurbishment works. I am interested in Oil & Gas Environment.

I'm BSc mechanical engineer and having over ten years of experience in the field of operation and maintenance.

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

I am a Senior Designer in offshore structures having more than 19 (nineteen) years of experience in my field. I am having hands on experience in checking of all offshore structural drawings viZ, Jackets, horizontal and vertical framings, decking etc.

PATRAN-NASTRAN, SACS 5.1 & 5.2, STAAD V8i, SESAM(GENIE) NAUTICUS, AUTOCAD, MS-WORD, MS-EXCEL, MS POWERPOINT, WINDOWS-XP, 2000, 98

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out