Resume - Degree in Electronics & Instrumentation with 6 years of experience in Engineerin...

Misco Jobs

Resume #87459

CONTACT INFORMATION:
View contact information...

Objective

Seeking challenging position in a growth-oriented organization that offers diverse job responsibilities in the field of Engineering and Projects to fully utilize and enhance both my technical & managerial abilities.

Education

Bachelors Degree in Electronics & Instrumentation Engineering from Periyar University, Tamil Nadu, India in May 2003

Work Experience

Qatar Technical Services WLL, Doha, Qatar
Project Engineer (E&I), November 2006 – Present

Roles & Responsibilities

Detailed engineering and design for all electrical & instrumentation installations
Preparation of Instrumentation design drawings includes Instrument loop drawings, I/O list, Instrument schedule, Instrument hook ups etc.
Preparation of Electrical drawings & documents includes Single Line Diagram, Motor load schedule, Cable schedule, Cable routing drawings, Installation shop drawing etc.
Selection of equipments & instruments as per the design criteria and project equirements
Preparation of Material submittals
Preparation of Method statements for all Electrical and Instrumentation installations
Preparation of Commissioning documents
Preparation of official letters to consultants & clients
Preparation of materials BOQ
Coordination with other contractors in the project
Responsible for all Electrical & Instrumentation installations
Updating the As Built drawings

Projects Handled
1. New Sewage Pumping Station Project (PSLD1, 2000l/s Capacity) at Lusail, Qatar (EPC
Project)
2. Sewage Pumping Station PS35/1/1 Upgrade Project, Lusail, Qatar (Ongoing)
3. Foul Sewer Pumping Station Project (CP2,2000l/s), Lusail, Qatar (Ongoing)
4. Automated Diesel fuel system Network Project (Grand Hyatt Hotel, Doha)

TRAGS Engineering & Contracting Co. Qatar
Instrumentation Site Engineer, May 2005 –September 2006

Roles & Responsibilities

Review of Engineering Documents & Drawings.
Preparation of daily work progress reports
Preparation of materials BOQ
Managing and distribution of site manpower
Responsible for supervision of Instrumentations installations
Field Instruments calibration & commissioning
Coordination with other contractors at project sites

Major Projects & Shutdowns
1. Pump House Upgrade project at US Army Base, Qatar
2. TEG Upgrade and Heat Tracing Project at Ras Gas Alpha Platform (Offshore)
3. Major Shut Down Maintenance project at PS2 & PS3 Platform, Qatar Petroleum (Offshore), June - August 2005
4. Major Maintenance Inspections on Gas Turbine (GTG3 & 4) at Ras Gas Onshore LNG
facilities with General Electric Inc., September – October 2005
5. LNG Train3 Shut Down Maintenance Project at Ras Gas LNG facilities (Onshore),
November 2005
6. Major Shutdown Maintenance and inspections on Turbines & Boilers (HRSG) at Ras
Laffan Power Plant, Feb – March 2006
7. Shutdown maintenance for field instruments for Train4 in March 2006 & Train1&2 in
May-June 2006

Chennai Petroleum Corporation Ltd., Chennai
Instrumentation Engineer Trainee, December 2004 – May 2005
In their maintenance department with FIME (Franklin Instrumentation Maintenance Engineering)

Roles & Responsibilities
Installation and maintenance of various instruments like sensors, transmitters, flow meters, gauges, switches etc.
Testing and calibration of instruments for optimum performance and desired output.
Preparation of instruments maintenance schedule
Carrying out minor modification projects and updating of documentation.

Fertilizers & Chemicals Travancore Ltd.(FACT), Kochi, India
Instrumentation Engineer Trainee, June 2004 – December 2004
In their maintenance division of 900 TPD ammonia complex

Roles & Responsibilities

Checking field instruments for periodic maintenance
Assisting for field instruments calibration

Asic Labs(I) Ltd., Kochi, Division of ELCOT (Electronic corporation of Tamil Nadu, India)
Control Engineer, Oct 2003 – May 2004

Technical Training
1. Attended Oil & Gas Field Instrumentation Training Conducted by Endress & Hauser in Germany, Switzerland and France (10 Days) visited the production and calibration facilities of E&H and attended the seminars by various Industrial Experts on the latest developments in the Instrumentation Field.

2. In-plant training at Fertilizers & Chemicals Travancore Ltd. (FACT) in their Instrumentation & Maintenance Division in June 2002 at Udyogamandal, Kochi, Kerala [India].

3. DCS operation and maintenance training course at Yokogawa Bluestar, Bangalore {India}. The training includes maintenance and repair of their latest DCS, [Centum CS 3000 and CS1000], designing graphics, control groups, control diagrams, interlocks, card configuration etc.

4. Project work entitled "Boiler Drum Level Control& Wireless Management Information System" completed at Kochi Refineries Ltd [KRL], Kochi in their maintenance department focusing a medium pressure boiler tagged UB6 as part of the curriculum.

Computer Proficiency

Conversant with Internet, e-mail, all programs of M.S. Windows including Word, Excel, Power Point, FrontPage etc.

Foundation course in AutoCAD with special emphasis on Electrical and Electronics designing from CADD Centre Training Services Private Ltd.

Strength

Have good problem solving with analytic thinking
Open minded to work in complex environment and projects
Good leadership & supervising ability
Good Communication skill
Posses Valid Qatari and Indian Driving licence.

Language Skills

English, Arabic (Read & Write), Hindi, Tamil and Malayalam

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 7050)

Go to Search Parameters...

Brief Description

Drilling high angle & horizontal wells, H2S, perform injection & production completion, well testing. Experienced in directional drilling, dealing w/ anti-collision, etc.

Innovative career in the field of electrical power engineering: Installation, Service and Commissioning

electrician

A total of 6 years of industrial experience which includes 2 years of production & commissioning experience in an Indian Refinery and 4 years of Advanced Process Control experience with Honeywell India & Aspen Tech Middle East.

AN EXPERIENCED BOILER AND PIPELINE DESIGN ENGINEER

EXPERIENCED PETROLEUM ENGINEER and PMP (PROJECT MANAGER), DEEP OFFSHORE, DRILLING, COMPLETIONS, SUBSEA EQUIPMENT AND CONNECTORS

Safety and Risk Researcher

I am Civil Structural Engineer having detail engineering and design experience of Oil & Gas industries. I have done my BS in Civil Engineering. I got exposure in the design of Civil & Structural components of Oil & Gas Plants.

Completed MS and BSc in Geology. Working in the Geological Survey of Bangladesh as an Assistant Geologist on 18 February 2007. My duties is to make Geological Reports, Geological Mapping, Environmental Observation, Identifying the Hazardous zones, River and Shore line Erosion observation

Project Manager with 19 years of hands on Experience of Executing Green field projects of Hydro & Pyrometallurgy- Zinc, lead & Copper, Cu SX & EW, Cobalt SX &EW, Leaching & Flotation plant, Copper Smelter. Transmission lines, HT & LT motors upto 7700KW, VVVF upto 5MW, Hot & Wet ESP's.

Over 17 Years of professional experience in Piping, Basic & Detail engineering of Offshore(FPSO, FPU & Wellheads), Onshore Refineries, Petrochemical plants, Oil field developments, Fertilizers, Chamical, Process and industrial plants of various types with excellent knowledge in Industry standards

Lead/Senior Instrument Designer 13years experiance with PDS Intools & programming skills. Intools ADministrator. SPI 2007 Administrator. Smartplant Intools Administrator

Diploma in Mechanical Engg & Having 10 years experience as a Piping Designer / Draftsman in OIL & Gas field

Sound technical knowledge of broad range of electrical transmission & distribution products, excellent knowledge of preparation of tenders and contract management, Good experience in EHV Turnkey Projects with Proven success record into complex environments

API 653 Qualified Inspector having experience in Static Equipment Inspection

Well Stimulation Engineer

Pre-Comms. Rep/Witness for Umbilicals , Subsea Controls/hydraulics

GIS Analyst

I am technically sounded professional having design, Construction, Erection & commissioning engineering experience in Field instrumentation & Systems. I have exposure in various industries like hydrocarbon industry, Power Plant industry, etc. I look for a suitable position in a design engineering or

Instrument and Fire ans gas Maintenance

Experienced Instrumentation and Control Engineer with extensive knowledge in PLC, SCADA, RTU and Network programming, Engineering Schematic development, Troubleshooting, Project commissioning and latest Industry standards.

Petroleum Engineer, I have three years of experience in the Oil Industry, specifically in Petroleum of Venezuela (PDVSA) as Production optimization Engineer and thermal engineer (Alternate and continuous Steam injection), Experience on wells, producing under artificial

Expert to work with ORCAFLEX ,ORCALAY,OFFPIPE,AGA Software - Able to work with CAESAR II,SAGE Profile,MOSES,AUTOPIPE,MATHCAD - Worked with DNV 1981,DNV 1996,DNV 1998 (Guideline No. 14),DNV 2000 (OS F101),DNV RP B401,DNV PR F103,DNV RP E305,DNV RP F105,DNV RP F107,BS 8010, BS 7910, API 5L, ASME B31.8

Mud Engineer (senior) experienced motivated ready to relocate works anywhere

Geoscientist, Senior reservoir modeller. Geostatistician. Scientific software developer

Over Eight years experience in the field of Quality Assurance and Quality Control services. Have performed inspections in the fields of Oil-Refinery, Petro chemical plant, Power plants, Structural Steel Fabrication shops, Flow line construction.

Extensive work experience and proficiency in the area of PLC,SCADA,HMI, Industrial Communication driver development/networking and Field instruments in a carrier spanning of 10+ years of experience in the sector of Oil & Gas, Water and Waste water treatment, Power, Pharmaceuticals, Chemicals, Packag

• Bachelor of Engineering in Mechanical from Bharathidasan University Nov-99

HSE Supervisor/ DP operator/ HLO/ Chief officer

University of Oil and Gas – Ploiesti, Engineer 2003;- BOSIET OPITO & H2S Induction - Survival Course in Malta at International Safety Training Center- with degree and personal safety logbook valid until Nov. 2008, Specialized certification course in “Programming annalist” – Windows, dBase, Fox

Checker/Sr. Piping Designer having a very good exposure in Piping layouts for Oil and Gas , Refineries and petrochemical plants, checking of Isometrics, MTO, Piping layouts, good working experience in PDS Desinn review.

* Membership in ASET and with work experience in instrumentation and control systems field. * Familiar with field instrumentation and industrial control system. * Experience in multiple loop control systems, PLC, DCS, SCADA systems * Fluent in computer and AutoCAD drawing skills.

A professionally qualified and technically competent Data Management Analyst, with 14 years experience in Well log Data Processing and Petrophysical Data Management.

To receive a laboratory, Technical, Analysis or Research position working in the Petroleum and/or Oil Field.

I am having Bachelor Degree of Mechanical Engineering certificate. I have 7 years experience in Qa/Qc field and 10 years experience in production field. And also I have completed the AWS-CWI,NDE Level II.

Piping design, pipe supports, project coordination. 25 years experience in petrochem industry. Autocad, word, excel, office. Motivated and available.

Over 25 years of experience in the oil and gas industry in: Quality Control and Inspection of Materials, Weld Inspection, Blasting and Coating .Management of personnel and administrative staff. Certification and condition assessment activities of both new and in-service equipment.

HSE specialist with chemical/process engineering background seeking environmental or HSE role within the oil/ gas and construction industries.

Please find below my details of experience for Estimation Engineer Position. I am a diploma mechanical engineer and keen in excelling in my career with hard work and accepting higher responsibilities.

Senior Pipelines Engineer with 16 years experience with International Consultancies.

Senior Training Officer, Mechanical with 17 years of extensive knowledge and experience in all aspects of technical training. Planned, developed, designed, conducted, mechanical training programs following the approved Competence Development Programs, ensuring mechanical fitters, tradesmen and techn

Engineering, Design, Installation, Commissioning, Programming, Management, Consultancy & Upgrades etc., for all types of Instrumentation & Communication Projects for Oil & gas Industry, Paints, Refinery, Petrochemical and Glass. Preparation of Design Basis Scoping, Functional Specifications Document

Procurement Engineer with 14year Exp. in Oil/Gas/Engineering Industry, Qualification Diploma in Fabriction Engineering

Oil & Gas Production Chemistry, Chemical Engineering, Corrosion Engineer, Process Optimisation, Production Chemicals Optimisation, Corrosion/Scale Prevention/Inspection, Process and Environment Monitoring, Well testing/completion design, Process design/waste water management, Extensive field experie

I am an innovative thinker with a demonstrated ability to improve production and decrease down time. I am very adaptable to changing projects and work schedules and have a proven ability to quickly train on different facilities. I have excellent planning and organizational skills

Degree in Electronics & Instrumentation with 6 years of experience in Engineering and Projects, Trained by various Instrumentation Vendors, Hands On experience in SCADA & PLC Systems, Field instrumentation, Vibration monitoring system (SKF), witnessed FAT for Electrical and Instrumentation Packages.

Mechanical/process/system completion commissioning and handing over

PHDWin, Field Direct, PA, Petra, OFM, MS programs, AS400, Wellcore, Webcore

PDMS Administration involving Teams, Users, Dbs,MDB. Access control rights and Roles management,Clash Manager Administration.

On line analyzer & Field Instruments Installation & commissioning Experience, DCS & PLC maintenance level experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out