Resume - A total of 15 years of professional work experience, (9) years in the Gulf regio...

Misco Jobs

Resume #87467

CONTACT INFORMATION:
View contact information...

Position Applied for: Civil QC Inspector

WORK EXPERIENCE

1)Company: ZUEITINA OIL COMPANY- Amec(Mapel Ltd.), Libya
Project: EPC Compressor Station & Facilities PN 1018-103A Gas
Transmission Pipeline to Coastal network
Position: Civil QC Inspector
From February, 2009 to April, 2009
Duties and Responsibilities:
Working with Zueitina Oil Company as a Client/Company representative to look upon the construction of Compressor Station and Facilities. Carry out inspection ensuring all activities have been properly performed in accordance with approved Inspection Test Plan(ITP), clients specification an applicable standard codes. Monitors construction quality on a daily basis. Perform and document inspections of contractor work as assigned, Generate NCR's when required, Attend weekly meeting about quality matters. Follow the HSE requirements applicable to work scope.

2) Company: AgipKCO – Bureau Veritas Inspection Ltd.
Eskene West, Republic of Kazakhstan
Project: Oil, Gas and Sulphur Plant
Position: Civil QC Inspector
From June, 2008 to JANUARY, 2009
Duties and Responsibilities:
Oversee all civil aspects of the project including; the installation of underground utilities; the placing of reinforcing steel, the erection of various forming systems, and the placing of concrete for the construction of slabs on grade, structural slabs, equipment foundations, walls, columns, duct banks, site grading and asphalting of roads. Inspects the construction of Substation, Control buildings and structures to determine that construction complies with approved plans and/or applicable codes and Standards.
Undertake site inspections to confirm the quality of the work. Document inspections as required on a Quality surveillance Form. Support all Punchlist related activities. Requires construction corrections to be made when deficiencies are discovered and assists contractors in determining methods to achieve code and standard conformance.

3) Client/Company: Qatar Gas Operating Company, Technip France
Ras Laffan Industrial City, Ras Laffan, State of Qatar
Project: - Ras Laffan Olefin and Common Condensate Single Point Mooring
Facility (42"dia. Pipeline-7.2 Kms) Offshore and Onshore Area,
- OLEFINS Project
Sponsor Company: Velosi Certification LLC, P.O Box 3408, Doha, State of Qatar
Tel.#: (+974)4352-850 to 55, E-Mail: velosi@qatar.net.qa
Position: CIVIL/Structural QC Inspector
From Oct. 2007 to April, 2008
Duties and Responsibilities:
Working with QatarGas-2 as a Client/Company representative. Conduct inspection For the construction of Pipeline Anchor pipe Sleepers, Pipe Bridge Piers, Steel PipeRack Structure and PipeBridge steel structure erection. Witnessing the Offshore dredging/backfilling activities of trenches for the 42" Condensate pipeline. Witnessing the Micro tunneling operation and Grouting works of the 42" condensate pipeline. Witnessing for the Erection of Pipe Bridge and Steel Piperack structures. Review the Project Quality Form Records for final acceptance and Prepare the Weekly Reports, Weekly Highlight of activities and Updated Status of activities. Involve in the implementation of SHE Policy within the construction area and in the execution of the project construction activities. Issues notices of violation where unsafe or illegal conditions exist and conducts follow-up inspections to ensure corrections are made. Investigates alleged violations of the Construction Code. Performs inspections in accordance with approved plans and all inspections. Detect possible defects and faults in construction and recommend or stipulate appropriate remedial measures. Accurately read and comprehend construction plans. Objectively interpret and consistently apply code requirements and related standards in accordance with department policies.

4) Client/Company: Kuwait Oil Company (KOC), Al Amhadi,State of KUWAIT
Project: Facility Upgrade and Relocation of Underground Piping for
12(twelve) Oil Gathering Cetres and Gas Booster Stations
Sponsor Company: SK Engineering and Construction Co. Ltd.
Building No.83, Street 13, Block 3, Al-Mangaf, State of KUWAIT
POSITION: CIVIL/ARCHITECTURAL QC INSPECTOR
From January, 2006 to September, 2007
Duties and Responsibilities:
Working with the KOCFMP Project as a Civil QC Inspector/Engineer. Responsible for the Quality Control inspections at site for all civil and architectural works, such as reinforcing bars, anchor bolts installation and formworks for the construction of pipe racks, pipe sleepers, equipments foundation and Desalter and CRU substations and shelters. Witnessing tests performed on concrete and soils. Surveillance and enforced Quality Control at site and ensure that works are performed according to the approved projects quality control plans and procedures. Ensure that all material certificates and quality records are complete for each items of works, prior to hand-over to the client.

5) Client/Company: HAMAD GROUP OF COMPANIES, Doha,State of QATAR
Project: Hamad Medical City Housing Complex
Sponsor Company: EL SEIF Engineering and Constructing Company
P.O. BOX 22453, Doha, State of QATAR
POSITION: Civil Inspector
From December, 2004 to June, 2005
Duties and Responsibilities:
Worked as a Civil Inspector for the construction of Hamad Medical City Housing Complex Project. Responsible for the quality control inspections for the installation of Pre-cast cladding panel for the external walls. Carry out surveillance and monitoring inspections during construction works in accordance with approved work method statements and ITP's. Coordinate with Client for the inspections of the following activities such as alignment of pre-cast panels, grouting of the corbels, placement of angular supports and washers, application of water proofing/installation of membranes, rectification of gravel finish and sealant works. Issue observation note and non-conformance report if the workmanship not being done in accordance with the work method statements. Ensure works are being carried out according to approved drawings for construction.

6) Client/Company: SAUDI INTERNATIONAL PETROCHEMICAL CO.(SIPC,
Al-Jubail, KSA), YANBU PETROCHEMICAL CO.,
(YANPET, Yanbu, KSA)
Project: Saudi Methanol Plant Project, Yanpet Polyethylene Plant
(Expansion) Project
Sponsor Company: Nasser S. Al Hajri Company, SIPC AREA #2, Industrial City,
AL-Jubail, kingdom of SAUDI ARABIA, P.O. BOX 495,
Dhahran Airport 31932 DHAHRAN, KSA
POSITION: CIVIL QC INSPECTOR
From September, 2003 to October, 2004
Duties and Responsibilities:
Working in Fabrication of Pre-cast Columns and Beams for pipe racks, pipe rack foundations, equipment foundations and the construction of control building and substation. Enforced Quality Control of the project. Witnessing tests on concrete and soils. Prepare and maintain complete Quality Control records for all related civil items performed within the work scope. Co-ordinate with the client's project management team on inspections and tests to be performed daily. Preparing packs for handover documents for each task with details.

7) Client/Company: NATIONAL POWER CORPORATION, (Napocor Region 1),
San Manuel, Pangasinan, Philippines
Project: SAN ROQUE MULTI-PURPOSE DAM
(450 MegaWATTS Hydro-Electric Power Plant) Project
COMPANY: RAYTHEON-Ebasco OVERSEAS Ltd.
San Roque, San Manuel, Pangasinan, Philippines
POSITION: CIVIL QC INSPECTOR
From November, 2000 to May, 2002
Duties and Responsibilities:
Was responsible for Quality Control for the entire works carried out, such as concrete works, fabrication of steel reinforcement, finishing works and excavation works. Overseeing of handling, storage of materials. To ensure that the placement of reinforcing bars shall be accurately placed in accordance with the drawing and shall be adequately held in position. To ensure concrete is properly produced and placed, cared and protected as per work method of statements. Look after concrete operations, Approval/Rejection of materials or workmanship which could cause improper construction relative to the specification. Responsible for the maintenance and submission of all specified reports. Quality Control inspection in various aspects of the project starting from excavation and finishing works including soil and concrete test. Maintain ISO 9002 Quality Control Programs and schedule at top degree priority.

8) Client/Company: SHARQ EASTERN PROVINCE PETROCHEMICAL COMPANY,
Industrial City, Al-Jubail, KSA
Project: SHARQ SPED II Expansion and Debottlenecking(POLYETHYLENE PLANT)
Sponsor Company: MITSUBISHI HEAVY INDUSTRIES CO,.LTD (MHI),
P.O BOX 10910, Al-Jubail industrial City 31961,
Al-Jubail, KSA
POSITION: CIVIL/STRUCTURAL SUPERVISOR
From January, 1999 to June, 2000
Duties and Responsibilities:
Work scope is in the construction of equipments, tanks, silos and pipe racks foundation. Including the erection of polyethylene and water booster structures. Co-ordinate with engineering section on field design changes and ensure information are passed to site sub-contractor's supervisors. Prepare material submittals, construction procedures and work method of statements for client's approval. Monitor work status to determine potential interface or schedule problems. Prepare weekly and monthly progress report. Enforced Quality Control and ensure that works are performed according to the approved quality plans and procedures. Maintain a high standard of accuracy and performance at all times
Responsible for issueing work orders for the following civil and structural works, such as excavation of instrument foundations, equipment foundations, piperack foundations and large foundation of tanks, fabrication of rebar and structural steelworks, responsible for the installation of anchor bolts for the instrument, equipments, piperack and tanks foundations. Responsible for the checking of all survey works, rebars and formworks at worksite to maintain accuracy with respect to approved drawing for construction. To monitor for the erection of all structural steel such as piperacks, water booster structures, shelters and to monitor all civil works.

9) Client/Company: SWCC POWER PLANT, Aziziyah, Al khobar, KSA
Project: Power and Desalination Plant, Phase-3 Lot 1A Contract AK-3
Sponsor Company: SAUDI SHINWHA COMPANY Ltd
P.O. BOX 15557, RIYADH 11454, KSA
POSITION: CIVIL INSPECTOR
From January, 1996 to February, 1998
Duties and Responsibilities:
Assigned as a Civil Inspector in the construction of Al Khobar Power and Desalination Plant. Responsibilities includes, supervision and inspection of various civil works such as equipment foundations, tank foundations, pipe rack foundations, cable trenches, sub-stations, water booster pump, control building and a large scale paving and asphalting of access roads. Witnessing tests on concrete and soils. Prepared necessary documentation attachments and necessary drawing attachments to Request for Inspection to ensure compliance with the contract documents and design drawings. Conduct inspection in the worksite with the client representative. Interface and coordinate with the client on a day to day basis regarding the quality of works in the jobsite. Prepared Turn Over package and final documentation.

10) COMPANY: SHIMIZU ENGINEERING AND CONSTRUCTION COMPANY
Tordisillas St., Salcedo Village, Makati City, Philippines
PROJECT: REGENCY OF SALCEDO 111 CONDOMINIUM Project
POSITION: SITE ENGINEER
From July, 1993 to June, 1994
Duties and Responsibilities:
Worked as a Site Engineer in the construction of Regency of Salcedo 111 Condominium. Incharge in finishing works includes; masonry, tile,plastering, painting and water proofing works.Prepare daily activities report, quantity take-off.Co-ordinate with the design section on field design changes and revisions. Issue field materials requisition for the material requirement at site. Monitor site activities and evaluate work progress report submitted by sub-contractor.Monitor adherence of the project quality plans and procedures.

11) COMPANY: LEPANTO CONSOLIDATED MINING COMPANY
Lepanto Mine Division
Lepanto, Mankayan, BENGUET, PHILIPPINES
POSITION: CIVIL WORKS FOREMAN
From February, 1990 to April,1993
Duties and Responsibilities:
Working for the rehabilitation of all civil works within the mines vicinity; such as asphalting of roads, concreting of yards pavement, construction of water reservoir and staff houses, and the replacement of damaged bridges and retaining walls.

Additional Information:
Birthdate: September 18, 1967
Birthplace: Mankayan, Benguet, Philippines
School Attended: University of Cordilleras(formerly BCF)
Course: Bachelor of Science in Civil Engineering
Associate in Geodetic Engineering

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 6997)

Go to Search Parameters...

Brief Description

A production/well completion engineer with over 20 years experience in Canada and overseas

I have Very good Experience in the Petrophysical Operation, Studies and Well reservoir Survillance. Have experience in QC/QA of integrated studies. Have leadership experience

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Multi skilled engineer, Technical Advisor, Mud Engineer

15 years Mechanical Engineer within Oil / Gas & refinery industry, inclusive 5 years maintenance experience; 5 years for nuclear power project; P.Eng of APEGGA, Canada

Can perform both technical work and sales work involving oil/gas industry more specifically as an advisor, planner, support or salesperson.

Drilling Engineer – DCWO planning, programming, engineering, operations evaluation, performance analysis; deep HPHT gas wells, high deviated, ERD and horizontal oil wells, sidetrack wells; land operations; harsh desert (Middle Asia) and arctic (Siberia) environment; English-Russian-Slovak

Senior Mechanical Engineer experienced in detailed mechanical / thermal / process and E&I design of Fired Heaters, Reaction Furnaces, Reformers, SCR’s WHRU’s, Boilers, Incinerators, Flares and associated ancillary equipment. Very strong E&I, DCS / PLC & BMS skills.

By working 17 years in the field of petrochemical field, I experienced all kinds of key projects like FCCU, Hydro-cracking unit, Hydro-treating unit and have expert ability to do piping static and dynamic stress analysis. Also I have five years working experience as a mechanical engineer in refinery

35 years of experience in the process industry working for engineering firms, equipment manufacturers, chemical company

Conducting a piping training program from zero skill up to a skill trainees supervising the assigned work from planning, organizing, leading and controlling. Performed piping work activities from designing and drawing the piping tie-in to existing pipelines, drawing various structural platform

Twenty years of professional experience in, design, consultancy, construction and maintenance, covering a broad range.

25 years of experience in construction, installation, commissioning, testing and maintenance of Electrical, Electronics and Instrumentation equipments and controls in Petrochemical Industry

Have more than 20 years experience in Piping Design and Engineering including Stress Analysis and Piping Materials Control for various projects in petrochemical plants, refineries and commercial chemical plants. Presently working in Worley Parsons (Colt Engineering Corporation), Calgary, Canada

Overview: Thirty (30) years of engineering management experience, 25 years of which were in the oil, gas and shipping industry and EPC projects that include the following: Project management, conceptual, feasibility studies, detailed design engineering, procurement, constr. and commissioning

Over 18 years experience in 2D and 3D seismic data processing. Processing land desert and mountain data. Processing experience gained in Geofizyka Krakow Ltd, WesternGeco and CGGVeritas. User knowledge of Unix, Linux , excellent Omega SPS and Tango, basic ProMAX. Good MS Office skills.

Advanced Process Controls, RealTime Process Information Systems, LIMS

PROJECT MANAGEMENT, CORROSION & MATERIALS,INSPECTION & INTEGRITY ENGINEER/MANAGER

More than eighteen years of experience in premium International Oil and Gas Engineering Consultancy Companies within the field of Process Safety, Technical Safety and Loss Prevention.

well services, production technology, safety, beam pump

Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.

Reservoir Geologist  To perform characterization Reservoir integrated Studies and reservoir Modeling. Generation and evaluation Geological Prospects and development opportunities. Elaborate Exploitation Plans. Planning (targets) and monitor of Special Wells. Volumetric reserve estimations.

Primavera, MS Project, MS Office, EVMS, Planning

Versatile technology professional with expertise as a Senior Reservoir Engineer and Operations Business Manager. Resourceful problem solver who performs well under pressure. Outstanding leadership, organizational, and communication skills. Granted Top Secret Security Clearance. Analytical.

More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic

SmartPlant 3D/P&ID Application support

I wish to apply for suitable position in the highly motivated & challenging environment. I am having 21 year of experience in different fields of Gas, Petroleum and Chemical industries. Also involved actively involved as an engineering material coordinator. I am having experience in identifying

More than 20 years experienced in project design services which involved mechanical and piping design preparation of conceptual design packages and detailed design packages, specification of pipes, fittings, valves and other specialties. Developed specifications for pumps, steam turbines, tanks, pre

A total of 15 years of professional work experience, (9) years in the Gulf region, of which seven years Were in the oil/gas, petrochemical, power/desalination plant and building construction projects. A Computer literate and proficient in oral and writing English communication skills.

Geophysicist position in a oil-field services company. I have more than 18 years of seismic data processing and data management experiences.

Welding Inspector, CSWIP 3.2, ASNT-II Certified, 18 Years working experience in Oil and Gas Industries in various countries.

Has 20 Years Expeierence in various aspect of Control and Automation and last 7 years in Middle East with ABB /Invensys. Has done large projects and several latest DCS/ESD systems such as Triconex,ABB infi90 , Foxboro I/A , Honeywell TDC3000 etc

I am qualified Degree chemical Engineer from the reputed Maharaja Sayaji Rao Uni, Vadodara

I’ve total of Eighteen (18) years experience in the area of Pipeline design and Piping design for oil & gas and petrochemical projects.

Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion

Expertise in gas sweetening, gas compression, gasification process, and U&O facilities.

Over 16 years experience as Electrical Engineer

I have been a Process Engineer for 16 years. My experience includes process design of oil, gas and petrochemical plants and steam and power generation units, expertise in conceptual design, basic design, FEED and detailed engineering, experienced also in optimization and troubleshooting projects.

Over 20 years experience in chemical, petrochemical and oil&gas industry.

Have about 25 years of experience in logging operations (Open hole, Cased hole and Production Logging Services) and interpretation of well logs (Open hole, cased hole and Production Logging)

To provide technical expertise of piping, mechanical engineering for Oil & Gas, Petrochemical, Power plant. Support to projects management, Supply division and projects controls through all phases of major and minor projects

Process Design Engineer with experience o fEPC contracts in Saudi Arabia. I also have expereince in operating plants, providing plant support. I am currently working as Technical Manager of 20 process engineers, doing small projects execution for Sasol Infrachem Utilities.

Seismic interpreter and reservoir geophyscist with experience in reservoir modeling, geostatistics and rock physics

An experienced Control & Instrumentation Engineer with extensive achievements in leading, designing, executing, and organizing project activities for process industries, e.g. oil/gas refineries, chemical/petrochemical complexes, Power plants, steel and copper industries.

Accomplished PLC, HMI, automation, programmable controls specialist

A Production Engineer with over 25 years of oil and gas field experience in domestic and international operations. Solid record in building project teams in multidiscipline and multilingual work groups. Strengths include planning, organization, and communication.

15 years of experience in PDP/FEED/Detailed Engineering and Construction support in Petrochemical/Chemical industry. Extensive experience with Pressure Vessels (ASME Boiler and Pressure Vessel Code: Sec. VIII, Div. 1/2), Piping (B31.1/31.3), Above Ground Storage Tanks (API 620/API 650)

Chemical process/project engineer, small projects manager

Lokking for a Inspector Job

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out