Resume - DCS, Control system and Maintenance Engineer

Misco Jobs

Resume #87588

CONTACT INFORMATION:
View contact information...

You are looking for DCS, Control system and Maintenance Engineer. My background as Electronic engineer and my professional experience in an international group where my duties was the conception, installation and setting automated SCADA systems and Instrumentation, in charge of the electricity and electronic maintenance service within a factory of the group, I have step by step been brought to me the responsibility of maintenance and supervision of the projects installation and the commissioning of production units for the group, those plans covered various process including production lines, Boiler, water treatment units, utilities...

At this moment I work as Control engineer for Paper Mill where I have as a mission revamping and installation of a new DCS system and other systems and team leader for the electrical maintenance section. I m very familiar with Siemens product, AllenBradly and Omron, and i wish that you can give me the opportunity with your team

Education
ƒæ 2000 ¡V 2005 Yarmouk University Irbid ¡V Jordan, Bachelor in Electronics Engineering, with total average of 73% (Very Good).
ƒæ 2000 Rusaifa High School Zarqa ¡V Jordan, Tawjihi with total average of 91% (Scientific Branch).

Professional Experience

Feb 2007 ¡V current Alsnobar Hygienic Paper Mill/NuqulGroup

* Project and Control Engineer

ƒæ Responsible for follow up all the suppliers and experts and find the solutions to make their work easier and faster During Alsnobar project.
ƒæ Administrate and manage the entire department Purchasing starting from the requests quotation and ending by the PO and implementation, under well-known procedure.
ƒæ Responsible for follow up the erection company and verify the jobs with the project standards During Alsnobar project.
ƒæ Responsible to maintenance all the mill problems through the Commissioning, startup and next period
ƒæ Responsible for defining the proper solutions in order to have the biggest production with best quality and less cost and number of accident for each paper ton produced by the machine
ƒæ Responsible for develop the exits control system using the ABB DCS System, Siemens PLC, AllenBradly and SCADA System,
ƒæ Responsible to Prepare the IMS System and implement it in the system as a daily work for the maintenance team, and Reviews all electrical PM (Preventive Maintenance) work routines in the Company's Maintenance Management to ensure that they are comprehensive & conform to the equipment manufacturer's recommendations. Raises new PM routines as required & ensures that the PM is updated accordingly.
ƒæ Supervise the installation, calibration and set up of instruments
ƒæ Insure the availability of all back up programs and machines
ƒæ analyze all the electronic layout and create practical modifications
ƒæ Assists in training / mentoring programs regarding the career development of new Engineers and Technicians
ƒæ Check the proper and safe operation of the machines by evaluating the running parameters and troubleshoot control system problem as they arise

Achievements

ƒæ Startup The Paper Mill 16 days Behind the target date with smooth startup,
ƒæ Add and Modify the Processes Controls needed,
ƒæ Prepare and Close the suppliers pending lists,
ƒæ Create the ISO QP and work Instructions for the Daily, Weekly, Monthly and Annual Maintenances.
ƒæ Increase the MTBF to 5 Days,
ƒæ Decrease the Unscheduled Electrical Shutdown from 80 to 40 Hrs / Year.
ƒæ Lead and Train the electrical technicians.
ƒæ Participate in Building a good warehouse with most of the needed spare parts.

Oct 2005 ¡V Jan 2007 Yabous Electronics' System,

Automation/Service Engineer

ƒæ Responsible for design and install control systems based on PLC to automate a production lines and connects it to a SCADA system.
ƒæ Responsible for program and maintenance a most of CNC machines such as drilling machine.
ƒæ Responsible for Studying, Analysis and present a solutions for the problems.
ƒæ Responsible for programming in VB.NET and database
ƒæ Responsible for design and draw the control and power schematic by AutoCAD.
ƒæ Responsible for design, install and configure computer networks

Training
Courses

ƒæ 2007 Course of ABB DCS System, 1st phase, Milan-Italy

ƒæ 2007 Course of ABB Drives System, Milan-Italy

ƒæ 2007 Course of ABB DCS System, 2nd phase, Zagreb-Croatia

ƒæ 2006 Course of SCADA System based on WinCC. Amman

ƒæ 2009 Course of Hydraulics & Pneumatics, Amman

ƒæ 2008 Course of Six Sigma, Amman

ƒæ 2008 Course of Preventive Maintenance, Amman

ƒæ 2005 Course of PLC Programming and specialized in OMRON
PLCs, Amman

ƒæ 2009 SAACKE Training Course (Combustion Controls & Burner Details), Amman

ƒæ 2008 Course of Radiation System and Effects, Amman

ƒæ 2004 Course of ASP.net with HTML VBScript, and SQL
Database, Amman
Skills
ƒæ Expert in ABB DCS and QCS System
ƒæ Familiar with Siemens SCADA System(WinCC, Protool)
ƒæ Familiar with most of the instrumentations and actuators with profibus communication.
ƒæ The ability to design control systems using different types of sensors, controllers and actuators.
ƒæ Familiar in programming PLC types especially Siemens S400, 300 &200, ALlenBradly, OMRON, LG, and Mitsubishi. and program the Industrial touch screens.
ƒæ Familiar with Sectional Drives and single drives especially ABB Installation, Configuration, and maintenance and connect it via profibus to DCS System or any control system.
ƒæ Expert with ABB MCC with INSUM Gateway installation, Configurations and maintenance
ƒæ Good experience in using six sigma techniques to find solution for the difficult problems,
ƒæ Good knowledge in Programming PIC microcontrollers using C language.Familiar in programming using Visual Basic and good knowledge in C++, web developers using SP.net and SQL Database.
ƒæ The ability to maintenance different systems and electronic boards.
ƒæ Good knowledge in design control panels using AutoCAD Good knowledge in using MATLAB, ORCAD group (Capture and PSpice), Circuit Maker and design layouts for electronic boards using EAGLE software.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 7054)

Go to Search Parameters...

Brief Description

Prefer to jobs that generate/analyze data in quantitative or qualitative

I am a B.Tech degree holder in Instrumentation passed out from Madras Institute Of Technology, Madras, India and I am having Sixteen years of experience in the field of Instrumentation in maintenance, construction, commissioning and design in petrochemical, refinery, power plants

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

•Engineering, Project Management, Construction Management, Cost Control & Sub-Contract Co-ordination •Oil & Gas, Petro-chem, Cross country Piping •Shutdowns/ Tie-ins •Equipment Installation/ maintenance and commissioning •Structural Fabn & Erecn •Manpower and Resources Planning

I have been working in the UAE since October 2001 as Mechanical Maintenance Supervisor/Commissioning Engineer in the Oil/Gas and Power Industry. Prior to that I held senior positions in the Military as Ship's Chief Engineer, Engine Room I/C, Instructor and In charge of training.

Total work experience of 5 years as Chemical engineer. Core competency on steady state process simulation, optimization & de-bottlenecking in the field of Petrochemical & Refinery

Large Water treatment plant like RO plant, DM Plant, Ultra filtration plant, Pretreatment plant Operation, Maintenance and analysis. Large Power plant Boiler(High Pressure Boilers) Water Chemical Treatment and Analysis, Cooling Tower water chemical treatment and analysis, Environmental(Ambient air,

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Geologist/Hydrogeologist, 18 years experience, environmental, sedimentary and glacial bedrock and soil deposits, 3-dimensional characterization of fracture zones in bedrock, LNAPL and DNAPL migration pathway analysis.

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

Process Instrument & Control and Analytical Insrument Specialist

I have 20+ years experience in all aspects of electical work, i.e. construction, testing and inspection and commissioning at home and abroad, onshore and offshore.

Reliability Engineer

A good team player with proven communication skills and ability to Motivate People, drive changes and strive for continual Improvement; Excellent People Management and Interpersonal Skills.

Scaffolding engineer Certified from CITB UK.

I have a M.S. in Petroleum Engineering with emphasis in flow assurance issues. Through my experience I have gain great communication and technical writing skills. Also been in a project has gave me the ability to work well both in teams and individually.

Piping designer, Pipe stress engineer

Mechanical Engineer (Piping- Lyout/PDS)

Working as a instrument technician in al- jubail petrochemical plant saudi arabia. involve in on line instrument and maintenace in low low density poly ehthelene plant(LLDPE) AND (LDPE) low density poly etheylene plabnmt.good knowlawdge of all type honey well ,yokogawa,foxboro and rosemount fisher

Designer/Drafter with Inventor experience.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

instrument supervisor libiya.

Drilling Engineer with 4 years experience ,working for a leading Exploration and Production Operator.• Responsible for planning and executing well designs and workover programmes for producer and water injection wells.• Monitor follow all phases of the daily drilling and completion operations, perfo

i am project manager assistant in pressure vessel and road tanks,cylider and on/offsure projects in industrial inspection company

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Schlumberger 17 years Coiled Tubing / Nitrogen services/Fracturing

Design and drafting OIl and Gas processign facilities, Structural, Piping, Civil. 7 Years experience with 3D CADWORX modelling on Canadian and international projects. Recently worked on Enterprise's Meeker II facility as well as Green River Gas Plant (PROPAK) early 90's.

Bilingual English-Spanish Project Manager with over 6 years of experience working for diverse industries including the Oil, the light and heavy construction, and the Steel Production.

I would like to apply with your company for the position of a INSTRUMENT SUPERVISOR /TECHNICIAN I have 11 years of oilfield ,gas plant ,power plant and some process plants experience as an SUPERVISOR, TECHNICIAN . I am having good work experiance with clients like ENI , IRAN PHASES 4 & 5 KOC -

Responsible for crude evaluation, expansion project related configuration studies, perspective planning and scenario analysis and retro analysis.

I have completed my Masters degree in Chemical Engineering from Lamar University. I have experience in ASPEN PLUS, ASPEN DYNAMICS, HYSYS, PRO-II for two years. I did my internship in Dynamic Engineering Purity Inc. for six months.

HYSYS simulations, process design, optimization, Process flow diagrams (PFD) and P&ID

Presently I am working with M/s B. S. Chaudhry & Co. as a Mud Engineer on E 760-II (1600 HP SCR), M 900-1 (900 HP), M 750 (750 HP), Cardwell-6, & Cardwell-7 since Jan.-2007 to till date continue at Mehsana Asset under MMC contract with ONGCL

Having experience in Mechanical Engineering in the field more than 10 years of Oil and Gas and Manufacturing industries mostly in engineering and inspections. Has worked in INDIA,and SINGAPORE on Onshore & Offshore.

Substation Automation engineer with 5 years of experience

DCS, Control system and Maintenance Engineer

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out