Resume - Highly skilled and experienced Sr. Drilling Engineer, experience with land/offsh...

Misco Jobs

Resume #87633

CONTACT INFORMATION:
View contact information...

Functional Roles
- Workover Rig Operator
- Drilling Supervisor
- Drilling Engineer
- Drilling Engineering Supervisor

Areas of Experience
- Domestic o Land (Permian Basin, Arkoma Basin, Central Kansas Uplift)
o Offshore (GoM OCS, GoM DW)
- International o Land (Oman)
o Offshore (North Sea OCS, Trinidad OCS)

Technical Skills and Experience
- Deepwater well design (to 7,000' WD, Subsea wellheads / XMAS Trees, tight tolerance casing, under reaming)
- Casing seat optimization
- Casing design (tri-axial analysis, HPHT, salt creep and APB mitigation, corrosion resistance)
- Casing wear prediction / mitigation
- Formation pressure analysis and real time monitoring
- Under reaming applications for tight casing tolerance
- Directional drilling, including ERD / horizontal (profile optimization, torque/drag analysis and real time monitoring, hole cleaning, Geo steering)
- BHA optimization (rotary, ABS motors, and rotary steerable systems; vibration control / mitigation)
- Drill center optimization
- Wellbore stability analysis and real time monitoring (over thrust, tectonics / continental plate boundaries, depletion)
- Subsalt (casing seat optimization, salt creep studies, casing design for salt creep, BHA vibration control/mitigation)
- Critical cementing programs (HPHT, cementing across salt, production intervals)
- Well control (shallow gas, HPHT, subsea)
- Detailed equipment design review
- Detailed drilling operations procedures
- Operational engineering support (daily review/planning, trouble shooting, logistics support)
- Onsite supervision of critical operations
- Onsite safety audits
- HSE reviews (pre-op, operations, and post op)

Organizational and Leadership Skills and Experience
- Mentoring of local Trinidadian Drilling Engineers
- Supervision of Drilling and Completions engineering staff for deepwater development (Shenzi/GoM/GC; Neptune/GoM/AT)
- Organization and facilitation of hazard reviews, post operations reviews, and equipment design reviews
- Determination of technical gaps and development / approval of outsourced research activities to close gaps
(e.g. salt creep study, APB mitigations, VIT design and chrome/chrome welding procedures and QA)
- Representation of companies interests in industry forums and distribution of technology within company
- Technical presentation to field teams (wellbore stability, hole cleaning, well hazards, etc.)
- Liaison with WI partners on technical and drilling cost issues
- Interdisciplinary liaison (G&G, Subsurface, Subsea, Facilities, Construction, Production Operations, Land, Business, Co Mgmt)
- Determination and procurement of project engineering staff
- Oversight of QA/QC activities
- Organization of multi-rig activities (e.g. logistics sharing, parallel planning/execution, resourcing)
- Incident investigation (ICAM)

Business Skills and Experience
- Stewardship of program development, reviews, and approvals through stage gate process
- Development and management of well construction budget through project life cycle o Cost Estimates (scoping/pre-sanction/sanction/operations; deterministic and probabilistic)
o Cost Reconciliations (field est. vs. AFE; invoiced vs. field est.)
o Long lead AFE (price negotiation, AFE generation/approvals, inventory tracking, disposition of excess)

Employment History

BHP BILLITON

4/05 to 9/08 Drilling & Completions Engineering Supervisor – Houston, Tx
Supervised Drilling and Completion Engineering Team on Shenzi project (4,500ft WD, subsalt, 27k ft TVD directional wells).

Pre-Operations Phase - Lead drilling and completion well design activity to meet production requirements (i.e. design for maximum anticipated flow rates and for life of well); Recommend scope of work for external resources to solve specific technical challenges (e.g. salt creep study, detailed APB modeling, etc.); Primary contact with working interest partners re drilling and completion technical and budgeting issues; Lead well design reviews throughout all phases of the project; Review/approve drilling/completion AFE (including Monte Carlo risk assessment) and submit to project management for project sanction; Prepare and submit long lead AFE for internal and partner approvals; Primary liaison with S&L re tracking delivery of long lead items; Approve engineering requirements to feed QA standards for all long lead items

Operations Phase - Responsibilities: Review/approve drilling procedures; monitor quality control system, monitored and reported capital expenditure, liaised with working interest partners, organized and led peer reviews and well/campaign post appraisals.

10/04 to 3/05 Drilling Engineering Supervisor, Exploration and Appraisal, Houston, Tx
Supervised Drilling Engineers for a variety of offshore drilling projects. Approved drilling procedures, monitored quality control system, monitored and reported capital expenditure, provided screening level cost estimates for future drilling campaigns…

3/04 to 9/04 Drilling Engineering Supervisor, Port of Spain, Trinidad, West Indies
Angostura Field Development Drilling Campaign – Supervised local Drilling Engineers, approved drilling procedures, monitored quality control system, monitored and reported capital expenditure, provided on-site QC and supervision of critical operations, developed Drilling Engineering training program,

1/02 to 2/04 Sr. Drilling Engineer, Petroleum / Port of Spain, Trinidad, West Indies
Angostura Field Appraisal and Development Drilling Campaigns – In Appraisal phase of project, developed drilling procedures and engineering guidelines, provided operational engineering support, and post appraised two appraisal wells. Between the appraisal and development campaigns, prepared technical and commercial analysis for various contractor services, prepared project level drilling time and cost estimates, and developed technical drilling programs and procedures. Served as multi-discipline task force leader in areas of wellbore stability and multi-lateral drilling. In operational phase, developed detailed drilling procedures, organized and assisted with ERD training for engineers and field crews, provided operational engineering support including on-site QC and supervision of critical operations, and post appraised operations.

7/01 to 12/01 Sr. Drilling Engineer, Exploration and Appraisal, Houston, Tx
Developed drilling procedures and engineering guidelines, provided operational engineering support, and post appraised GC 282 #1 well (3500ft WD subsea).

BP

7/00 to 07/01 Sr. Drilling Engineer, Crazy Horse Project, G.O.M Deepwater Dev. BU, Houston, Tx
Jul – Dec 2000, primary roles included definition of drilling risks and costs for input to development concept selection. Specific duties included: Development of a probabilistic cost model with learning curves; Optimization of multi-rig drilling/completion schedule wrt production goals and construction constraints; Definition of drilling risks for HPHT ultra deepwater wells; Defined scope and budgetary requirements for technical projects required to mitigate risks.
Jan-Jul 2001 primary role was development of a cased well integrity plan. Specific deliverables included: Casing seat / hole size optimization; Mechanical casing design, including mitigation for annular pressure build-up and ong term salt mobility; Liner hanger and landing string designs; Application of expandable tubulars; and Systems compatibility document.

6/99 to 7/00 Sr. Drilling Engineer, G.O.M Deepwater Production BU, Houston, Tx
Project Drilling Engineer for Pompano infill drilling program, utilizing a platform drilling rig. Well types include ERD and sub-salt.

1/99 to 5/99 Sr. Drilling Engineer, G.O.M Deepwater OBU., New Orleans & Houston
Project Drilling Engineer for re-entry of VK 914 #1, 3500' water depth, which utilized a semi-submersible drilling rig. Challenges for this project included minimal available planning time and managing logistics and communications complications during the company merger transition. The well was drilled within AFE cost and met objectives.

AMOCO PRODUCTION COMPANY

1/97 to 12/98 Sr. Drilling Engineer, G.O.M Deepwater OBU., New Orleans, LA
Project Drilling Engineer for deepwater exploration operations in VK/MC/GC corridor. This assignment included rotation of duties (planning vs. operations support) on a well to well basis, for a continuous drilling program. During the period, 7 deepwater exploration wells were drilled in water depths 3500' - 7000' with a dynamically positioned drill ship. The drilling program was characterized by continuous improvement in a multi-disciplinary environment, resulting in significant reduction of drilling time for GOM ultra deepwater wells, and setting industry performance 'Best in Class' benchmark. Other duties included mentoring of Rotational Drilling Engineers, benchmarking drilling performance vs. industry, and representing Amoco at various industry technical forums. In addition to specific project planning, I worked with the WEBG Well Planning Team to develop an inventory of exploration prospects, and worked with a OGCI consultant to customize a Well Project Management tool specific to GOM Deepwater Exploration projects.

4/95 to 12/96 Sr. Drilling and Completion Engineer, G.O.M Shelf OBU, New Orleans, LA
Project Engineer for numerous drilling and completion projects in Eugene Island, Ship Shoal, and West Delta. Duties included: Construction of operations plans; AFE Drilling / Completion / Workover cost estimates; Daily monitoring of operations and consulting to Drilling / Completion Foremen; Benchmarking progress against offset wells; MMS permitting; Drilling group contact to OBU customer. Types of projects included: Cased hole sidetrack; Horizontal and extended reach drilling; Completion types included conventional, single and dual cased hole gravel pack, open hole horizontal gravel pack, frac pack, and sub-normally pressured zones. Other project types included: HPHT DST program preparation; Coil tubing clean-out, logging, and fishing; Wellbore PxA and slot recovery; Casing retrieval. Types of equipment used in these operations included: Independent leg cantilever jack-up rig; Mat type jack-up rig; Coil tubing unit; Snubbing unit.

12/94 to 4/95 Drilling Engineer, OBU, New Orleans, LA (Rotating from Houston)
Project Engineer for HPHT Drill Stem Test for sub-salt well in US GOM from a jack-up rig. Responsibilities included: Construction of operations plans; Coordination of DST project roles and accountabilities for multi-discipline team; Project Engineer on multi discipline team conducting detailed process hazards analysis for DST surface producing equipment.

11/94 to 12/94 Drilling Foreman, San Juan, New Mexico
Supervised drilling operations in capacity of Drilling Foreman for horizontal well (1900' vert sect) drilled with air/mist. Liaised with onsite Directional Driller and Geologist and with office based Geologists and Drilling Engineer to coordinate directional drilling plan. Coordinated personnel and materials logistics. Documented daily drilling data in DIMS. Created list of recommended operational improvements, which was forwarded to the Drilling Engineer and Drilling Superintendent.

02/94 to 11/94 Well Operations Supervisor, North Sea, UK
Supervised wireline well intervention offshore, including: production logging, P/T gauge inst. & retrieval, GLV service, X-Mas tree change-out, and wireline fishing. Supervisory duties included coordination of logistics and operations, supervising wireline crews, monitoring and implementing permit to work system, and liaising with offshore management to insure compatibility of workover operations with production operations. Onshore duties included final review/editing of operations programs.

10/93 to 07/94 Drilling Engineer, Houston/Oman
DUTIES: Created drillability study to define drilling environment and optimize bit selection and BHA design/Operation; Tracked planning progress with MS-Project timeline; Co-authored Drilling Operations Plan; Provided wellsite engineering assistance; Worked as assistant (night) drilling foreman; Monitored/controlled drillstring vibrations in hard and abrasive lithology to reduce risk of drill string failure; Assisted Senior Drilling Foreman with logistics in semi-remote operation; Worked with multi-national crews to enhance drilling efficiency and promote safety. RESULTS: Drilling optimization (primarily bit/BHA selection and operation) resulted in performance improvements saving $700M VS offset well performance; No lost time accidents; All exploration objectives met.

06/93 to 09/93 PxA Supervisor, North Sea, UK
Worked as Engineer / Night Supervisor for North West Hutton platform well abandonment. Supervised simultaneous operations (coil tubing abandonment of live wells, and casing cutting/pulling) in conjunction with ongoing production operations. Coil tubing operations included wellbore clean-out, perforating, fishing and cementing. Duties included cost monitoring and control, materials acquisitions, wellsite operations supervision, technical assistance, safety management system audits, and detailed operations reporting. Direct results of efforts included no LTA's and project cost 1.5 pounds sterling under budget.

10/92 to 05/93 Drilling Engineer, Aberdeen, UK
Provided onsite technical assistance to Amoco Drilling Foremen while drilling a HPHT well (Appleton, 30/11b-3) in Central Graben of the North Sea. Co-authored drilling operations plan for the Wallis and West Davy prospects in the Southern North Sea. Wrote and compiled the Final Well Report for the Appleton well. Flowcharted the final well report process and developed scorekeeping measures to track improvement.

08/91 to 10/92 Drilling Engineer, Houston, Tx
Prepared drilling programs, analyzed rig bids, consulted with BU staff to meet requirements for drilling projects in North Permian Basin BU. Simultaneously handled two to six rigs working under footage and turnkey contracts. Reduced drilling cost in Prentice field by 13% through rig contract negotiations. Optimized casing cementing program. Initiated drilling waste generation and disposal tracking system. Utilized 'Conitnuous Improvement' concepts with rig site team to optimize drilling program.

06/90 to 08/91 Drilling Engineer, Oklahoma City, OK
Worked as Project Engineer for Red Oak Infill Drilling Program. This program included two rigs working continuously on a daywork contract basis. Duties included preparation of drilling procedures and daily monitoring of operations progress, and consulting with Drilling Foremen. Results included a cost savings of 9.3% vs the previous drilling program.

BCCC AND UNIVERSITIY OF KANSAS
01/86 to 05/90 Student at Barton Co. Comm. College (Great Bend, Ks) and U. of Kansas (Lawrence, Ks)
Acquired BSPE degree from U. of Kansas. Self supporting via savings and various work activity during summer and winter breaks. Work activities included operating oilfield pulling unit, pumping wells, grocery store clerk, and steel demolition/construction.

RAMCO/CHEYENNE/CHASE WELL SERVICE COMPANIES
01/80 to 12/85 Completions/Workover Rig Operator, Great Bend, Kansas
Operated completion/workover rigs in Central and Western Kansas. Supervised rig crew and ran derrick and pole mast pulling units for well completion and workover programs for major and independent producers. Obtained direct exposure to logging, perforating, well fracs, acid stimulation, well clean-out, multiple zone completion and workover, swab/flow testing oil/gas wells, and installation of variety of downhole production equipment. Workover experience consisted of re-completion (re-entry), cement squeeze, hydra-jetting, wellbore cleanout, downhole equipment service.

WHITEHURST STEEL ERECTORS, PLAINS CONSTRUCTION, SCHNEIPP CONSTRUCTION
09/77 to 01/80 Construction Foremen, Dalhart, Texas
Worked initially as general labor, moving into Foreman position within one year. Construction work included: Erection of steel grain storage bins (42' - 90' dia.) on a contract basis in a 9 state region; Construction of customized steel warehouse and office buildings; Cement foundation work (flat work and basements).

EDUCATION

BS, Petroleum Engineering, University of Kansas, 5/20/90

INDUSTRY SCHOOLS

08/03 Extended Reach and Horizontal Industry Training Course (K&M Technology)
09/99 Risk Analysis
09/98 Facilitation Skills
08/98 Torque & Drag Modelling
03/97 Amoco / Chevron Pore Pressure Applications
09/96 Amoco / Chevron Solids Control
06/96 Amoco Tubular Design
03/96 World Oil Coil Tubing Conference
02/96 World Oil Coil Tubing School
11/93 Coil Tubing Unit Applications Workshop
10/93 Floating Drilling
09/93 Formation Evaluation
08/93 Win-Win Negotiations
07/93 Effective Technical Writing
05/93 Drill Through Equipmemt & Related Systems
04/93 Completions & Workovers
06/92 Industry Bit / Coring
06/92 Drilling Environmental Training Program
03/92 Compass Software Training
10/91 Drilling Practices - Murchison
10/91 Drilling Tubulars
08/91 Drilling Fluid Technology
11/90 Industry Cement
09/90 Fundamentals of Petroleum Geology

WELL CONTROL
IWCF Last Taken Expires
Classification: Basic // Drlg // Supvr Mar '09 Mar '11
Qualification: Surface and Subsea

ENVIRONMENTAL HEALTH AND SAFETY
Date Course Description
04/03 FOCUS II (Contractor Safety Program – GSF)
08/02 Safety Leadership
08/02 Incident Investigation (ICAM)
08/02 Hazard Identification Assessment
01/00 EMS Training
12/99 Leadership Training
12/99 Advanced Safety Auditing
09/99 Incident Management System Orientation
08/99 STOP (Safety Training Observation Program)
07/99 Offshore Water Survival
06/92 Drilling Environmental Training Program
10/92 FIRE / First Aid / Survival (UK)
10/92 First Aid (Aberdeen)
10/92 UK Survival And First Aid (Aberdeen)
10/92 UK Survival Training (Aberdeen)
10/92 UK Fire Fighting (Aberdeen)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 7040)

Go to Search Parameters...

Brief Description

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Well-developed interpersonal skills.

Senior Process and flow assurance engineer with full project cycle experience.

I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary

Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5

I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model

Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.

Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..

Free! I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.

Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway

Drilling exploration production, per cv below

B.E. (Mechanical) - 1980

Petroleum Engineer with 26 years of professional experience mostly in Production Engineering. Spanish and English fluent speaker. Artificial lift, workover and well service recommendations. Well Completion programs. Well testing. Field Evaluation and Production Optimization.

30 + year mud engineer, experienced in all phases of drilling fluids & BOP.

I have more than 17 years experience in exploration and development domains. During my career, I have explored for hydrocarbon in the Algeria sedimentary basins. North Sea Norwegian sector, Libya and now I`m working in Canada for Fugro-jason.

23 YEARS EXPERIENCE IN PETROCHEMICALS -PROJECT , OPERATIONS ,ERECTION ,COMMISSIONING

Seasoned and versatile process engineer (Oil & Gas, Refining) seeking a Process Engineering position that utilizes my analytical and communication skills to enhance organizational growth and profitability.

Project management, Coordination with End User/ Vendors/Contractors/Consultants, Progress monitoring& reporting, Supervision, Quality/Safety assurance and Tender documents

Professional API 510 and AWS CWI Inspector

With thirty years experience in the workforce in industries such as oil & gas, mining, fabrication/construction, and marine engineering, I have a very strong mechanical aptitude in all disciplines and a strong commitment for OHSE having started with my apprenticeship as a Mechanical fitter/1st class

Petrophysicist

Over 15 years of experience in Instrumentation Engineering, Procurement, Construction, pre-Commissioning and commissioning of projects

Highly skilled and experienced Sr. Drilling Engineer, experience with land/offshore (including deepwater), having worked as Drlg Engineer through Drilling Engineering Supervisor for a large scale GoM deepwater developement project.

20 years experience in drilling/work

Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP

Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering

B.E.(Mechanical); 22 Years total Industry Experience; Served with SABIC, Reliance, SPIC & Shell;

More than twenty (20) years experience in the field of Engineering Construction in

A professional, well-qualified MECHANICAL ENGINEER with extensive project management experience in the oil refining, gas, LNG/LPG, petrochemical and associated industries.

Senior Plant Inspection Engineer. Mechanical engineering graduate with 29 years of experience in Oil/ Petrochemical industries loking after Process Plant Inspection, Materials Inspection, NDT, Corrosion, Failure Analysis, Fabrication/ Welding inspection in running plants + new grass root projects.

Geologist, Heavy Oil and Oilsands. Experienced consultant, prospect generator, horizontal well planner for thermal and CHOPS applications.

I have 22 Years of experience in the Detailed Design and Engineering in the areas of Plant Design & Piping for Oil & Gas, Petrochemical, Chemical and Power Projects. I am presently working as a Head Piping.

With 20years O&G experience, my main experience has been on major projects during design. I have experience within Operations, Construction and Commissioning and also worked on site; offshore, pipeline construction and FPSO shipyard construction. I have Australian and British Citizenship.

Dedicated professional in Exploration and Production with 27 years experience working for the two largest major Oil Services Companies. Strong engineering background in Drilling and Completion Fluids as well as Drilling Waste Management through years of focused operational management.. Strong engi

Drafter & Designer experience in estimation and designing of transmission lines and poles. Facilitated department meetings for administration of projects. Have worked the industry for twenty-five years and have obtained a Bachelors of Science degree in, Business Administration. Ability to prioritize

Profile: A Specialist Seismic Interpreter with over 15 years experience in Oil & Gas exploration, in seismic interpretation and prospect generation. Having the ability to supervise seismic processing and acquisition activities and take on role as a Project Manager. Confident in ability to cont

Working with Transocean as a Drilling Manager in Integrated services Project started for 5 Jack up rig for Bombay High field with client -ONGC. Operation commence in Jan 2007.

Drilling Engineer offshore tender rigs jackups onshore land rigs

process engineer

a senior instrument & Controls engineer

Sr Piping Designer Oil & Gas 3D model

Senior Planner with more than 20 years experience in Oil & Petrocehmical Industries

Qualified professional Project Manager and licensed US chemical engineer, with 32 years oil and gas and refined products production and processing facilities, pipelines, stations and terminals.

Piping Engineer/Designer

Presently working as Drilling Manager with Transocean started up the project in India for 5 Jackup rig for ONGC along with Tony Flynn who was than our GM -Integrated services in May 2006. Direct responsibility is managing T12 and JTA ( 300' Jackup)on day to day coordination, planning and execution

AutoCAD drafting, Drawing, Painting (Acrylic, Oil, Water Color), Airbrushing, Faux Finishing, Murals, and Computer Graphics /Illustrations. Software: Adobe Illustrator, Adobe Photoshop, Adobe Streamline, Adobe 3D, Flash, Fractal Painter, Quark Xpress, Microsoft Word, Power Point and various scanning

Instrumentation, Control and Safety Systems Design Engineering - Projects

A Professional Engineer with over 18 years' experiences in Process Control Systems for the design, development & implementation of process control applications, oil storage, movement & blending applications and process training simulations. Extensive knowledge in Honeywell Distributed Control System

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out