Resume - B.E. (Instrumentation technology) from Visveswaraiah Technological University, B...

Misco Jobs

Resume #87647

CONTACT INFORMATION:
View contact information...

Duties and Responsibilities of Electrical:

- Installation of low and high voltage cables &Installation of cable trays / ladder and conduits

- Installation of power transformers & Installation of emergency diesel generators

- Installation of low and high voltage switchgears & Installation of low & high voltage motors

- Installation of earthing and lightning protection system & Installation of small power distribution equipment

„« Cathodic protection system of concrete structure & Installation of neutral earth resistor

Duties and Responsibilities of Instrumentation:

- Routine Area Surveillance of Instrumentation erection activities
- Inspection & Witnessing according to Project Specification and QCP & ITP
- Established field inspection & Testing Procedures for Instruments works with the assistance of Site Project Engineers.
- Inspection for the Installation of Field mounted Instruments, Junction Boxes, Local Panels, Pneumatic Leak Test of Air Line Tubing /Impulse line tubing, Insulation Resistance test and Continuity Check for Instrument Cables.
- Inspection for the Installation of DCS Panel, ESD Panel, Fire & Gas System Panel, Consoles & Computers with Printer, Communication system panel and Weather Monitoring System in the Main Control Building.

- Inspection for the Instrument Cable Trenches prior to cable Pulling and after Cable Pulling to release for the next activities. Also inspection of Cable ladders and Cable trays in the Field, Electrical Substations, SIH and in the Main Control Buildings. Inspection for the Field Electrical and Instrumentation cables, Underground and above ground cables and Fiber Optic Cable Installation
- Inspection for the Installation of Fire & Gas System in the Field such as Push Button, Horn & Beacon and Fire Detection System.
- Also Responsible for witnessing Combined Instrument Loop check and Calibration of Pressure transmitter, Flow, Differential, Relief Valves, Level Transmitter, gauges and other Instrument devices.
- Also Coordinates with Clients Project Inspection Unit for project Inspection and Stage wise activities for Witness or Hold Points.
- Mechanical completion Inspection for MCCR release, Area Punching and Punch listing, Processing and Updating of QC documentation, QC Dossier and Implementing the QC plan.
- Preparing and Answering Project technical Query (PTQ)
- Overseas the Documents Control management and ensures the availability of Current Client Engineering Standards, procedures and industrial Codes and Standard.
- Familiar with International standards NACE, ASTM, DIN, BSI, IEC, ANSI, API, NEC, NEMA
- Effectively Co-ordinates with other related disciplines.
Also aware of Safety rules and regulations, Conducted weekly safety Auditing and reporting, participated weekly safety meetings and familiar with all relevant safety induction like 100% Fall Protection, Confined Space Entry and Pre-commissioning priority.

Education & Certification: -
B.E. (Instrumentation technology) from Visveswaraiah Technological University, Belgaum, Karnataka.

- B.E. IN INSTRUMENTATION V.T.U. Belgaum
- Diploma in ¡* Total Quality Management¡¨ course from NILEM
- Diploma in ¡* Certified Automation Engineer ¡* course from
Prolific Systems & Technologies Pvt. Ltd., covering

Being an ambitious and motivated, I would like to exploit my potentials by focusing on improving and diversifying my technical skills through a progressive organization in order to become high caliber technical engineering service personnel in Automation & Control industry.
Work Experience:-

ABROAD WORKING EXPREINCE: Since 15 Jan 2009 to till now
COMPANY NAME: CCG
Designation: QA/QC Eng.
Project: Ras Laffan Port Expansion(offshore)

ABROAD WORKING EXPREINCE: Since 25 Dec 2006 to 14Jan 2009
COMPANY NAME: CCIC
Designation: QA/QC Eng.
Project: Qatar Gas Expansion 2

Work Experience:-
Company:- LARSEN & TOUBRO PVT. LTD
Working as a Instrument engineer Since August,05 T0 NOV,06

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 6997)

Go to Search Parameters...

Brief Description

Instrument Engineer (KNPC- Kuwait National Petroleum Company)

Piping Designer/Construction Manager

Turnover engineer skill gained through varied qualifications and experiences in the field of Commissioning and HSE.

Piping Design Enginee,PDMS,PDS

B.E. (Instrumentation technology) from Visveswaraiah Technological University, Belgaum, Karnataka. Diploma in “Total Quality Management” course from NILEM

Seismic Interpretation - SMT Kingdom (2 years), Landmark (occasional), mapping and gridding - Petrosys. Microsoft Office (all areas).

Piping Layouts, AutoCad and PDMS

Electrical Engineer 10 years of experience in Projects in Oil& Gas,Refineries,Fertilizers,High Rise Buildings

EIT

Diesel mechanic, hardworking and 11 years experience

I am a mainer engineer working with bp shipping, uk and wishing to shift my career to shore based job

5 yrs experience in Piping & stress analysis

I am an Instrumentation & Controls Engineer and have almost 2 years of experience in the Oil & Gas Engineering and Services field. I have a Masters degree in Communication Systems (Electrical Engg). As an Instrumentation Engr, i was responsible for Engineering Design and Specifications.

Engineering technician

Gold madelist in MS process engineering and Bsc Chemical Engineering. i am familiar with almost all the chemical engineering softwares and have a good experience of using them. I can diagnose a problem esily and propose the solution to that problem effectively

My background has afforded me many "intangible" qualifications one can't learn from a book. Qualities such as resourcefulness, team leader, adaptability, pride, and common sense are just a few; protocol including integrity, accountability, and a honest work ethic make me a cut above the rest.

Pipe Stress Engineer

Detailed Engineering, INtools(User & Administrator Module), 3D PDS, SPR, Navis works.

Plant Design Engineer

Desiging of new control system/smart instrumentation system,ESD/DCS/PLC/ based system,

A full-time position in HSE where I can demonstrate my knowledge and skills and effect continuous improvement in performance utilizing my 12 years experience as HSE Advisor (Advising on EHS, investigating/reporting, EHS training, statistics, management experience).

PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.

Environmental pollution monitoring and assessment. Post Graduate Diploma in Environmental Management in 2004 from Sagar university (M.P.).

Experienced Supervisor in the Electric Submersible Pump Industry

*Offshore pipeline installation engineer, Project engineer in major pipeline projects

Reservoir Engineer

Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in both Written and Spoken English, French and Arabic.

Over 13 years of experiences working as an electrical Engineer, in Oil & Gas, Petrochemical and Project Engineering.

Proficient in Aspen Plus, Pro II, Hysys, Real Time Optimization using aspen plus. Sound Knowledge on PFD's and P&ID's.

Posses working experience in oil and gas industry, especially in Welding, NDT, QA/QC inspection, QA/QC Final documentation and Internal Quality Auditor with high performance standard of company¡¦s product and good inter-personal skills. Learn to approach all projects and engineering practices.

Instrument Engineer with more than 5 yrs of experience in EPC Oil & Gas Design

Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

15 + years supervising C&A and Twin pumping units in primary cementing and stimulation of oil/gas wells. 2+ years being offshore in the North Sea, Scotland completed 2 wells offshore in the Black Sea, Bulgaria. A 5 well project offshore in Mauritania Africa

ArcGIS, ArcCatalog, ArcMap, AutoCad, AutoCad Map, Microstation V8, Adobe Photoshop, Corel Draw, Adobe Acrobat, Microsoft Word, Microsoft Excel, Microsoft Power Point

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

Fifteen years of diversified process and mechanical engineering experience in oil and gas offshore/ onshore facilities. Selection of key process technologies, key issues from reservoir, drilling, top side to production optim & simulation

Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance

I have 12 years experience in Automation(DCS & PLC). I also worked as project management.

I am a Mechanical engineer with twelve years of experience. I am responsible for the execution of maintenance of rotary &stationary equipments in petrochemical Industry, spares planning, manpower planning and contract fixing etc

For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.

Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.

Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.

I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.

I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....

A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors

INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks

Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.

SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out