Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #87765
next resume »»
CONTACT INFORMATION:
View contact information...
CAREER OBJECTIVE: Face new challenges as PMP, Drilling or Completions Engineer in the petroleum industry.
Working VISA status: Brazilian citizen and Canadian resident Status.
WORK HISTORY
Working at critical equipment acquisition (compressors, boiler, heat exchangers, PSA; critical equipment budget: US$ 50,000,00.00) for Desulphuring Gasoline Plant (HDT) and a Cogenerating Power Plant from October 1st 2007. I am also undertaking a MBA in Strategic Cost Management (532 hours) from Feb 2008 until Dec 2009.
Worked at Petrobras Business Unit of Rio de Janeiro at GEP (Group of Enterprise of Well) of SS-51 coordination and execution (as company man) of Wells Drilling, Completion, “Work Over†and Formation Evaluation (March 2003 to September 2007); rig daily rate: US$300,000; average cost for each well: U$20,000,000. P-54 Grouting operation (first in Brazil): planned and coordinated the drilling and casing of 13 wells with average of 130m depth in 5400 ft of water depth for anchoring a Stationary producing unit.
Worked at the Subsea Engineering Division-Underwater Electronic Systems, offshore, down hole data acquisition for Well Testing, data analysis with the PANSYSTEM software. I also installed and repaired Permanent downhole gauges (PDG) and TPT (Temperature and Pressure Transmitters), reducing costs about US$200,000 for each installation; supervised the operations of DPR (“Drill Pipe Riserâ€) for deep water well completion (deeper than 5000 ft) from 1993 to 2003.
Pioneered on Amazon jungle well completions - doubling oil output in 3 years (1989-92) - formation evaluation and work over (cased hole logging, perforating, cement squeezing, Drill Stem Tests, production tests, data analysis in the Amazonic Petroleum Field of Urucu from 1989 to 1992.
International experience: worked at Schlumberger Wireline Services as a trainee in open hole logging and perforating in Mexico (Isle of Carmen, Campeche) and South of Argentina (Comodoro Rivadavia, Chubut) in 1988 and 1989.
Managed Petrobras gas producing fields of Itaúnas, Fazenda Cedro and Lagoa Suruaca, north of Espirito Santo State - Brazil (from April to November of 1988)
EDUCATION
PETROBRÃS-CENNOR (Center of North-northeast Training) - Salvador, Bahia, Brazil.
Petroleum Engineering post graduation, emphasis Production â€" 1987-88.
UFMG-Federal University of Minas Gerais - Belo Horizonte, MG, Brazil.
Bachelor of Sciences in Mechanical Engineering (BSME)-1986.
CEFET/MG- Federal Center of Technological Education of Minas Gerais-Belo Horizonte, MG, Brazil. Mechanical technician-1981
COURSES AND TRAINING IN PETROBRÃS
Negotiation Techniques and Conflict Management â€" IBMEC â€" 32 hours â€" September/October 2009
Leadership Seminar (Petrobras Corporate University_ Prof. Arline Davis) â€" 16 hours â€" August 2009
Client Relations Management (“Companhia para Crescerâ€) â€" 16 hours â€" August 2009
Preparation Course for PMI Certification (PMP â€" Imersion) â€" 40 hours â€" August 2008
Course on Dynamic Equipment (Compressors, Turbines) PROTEC (40 hours) â€" August 2008
Course on PROJECT MANAGEMENT FUNDAMENTALS (24 hours) â€" June 2008
IADC’s Well Control Accreditation Program - Supervising (40 hours) â€" Aug 2007
Course on “Open Wells†(Landmark’s well data management software) (8 hours) â€" June 2006
Course for Internal Acident Prevention Members Group (40 hours) â€" December 2005
Investigation of Accidents with Basic Causes Analysis (16 hours) â€" November 2005
Directional and Horizontal Drilling (40 hours) - September 2005
Sand Control Operations and Equipment (40 hours) â€" August 2005
IADC’s Well Control Accreditation Program - Supervising (40 hours) â€" July 2005
Course on SAP/R3 (POS 205) - Reports for wells interventions (PS and PM-16 h) - March 2005
Course on SAP/R3 (LTE 201) - Transport Requests-module PS (16 h) - February 2005
Course on SAP/R3 (Pos 204) - Module PS (40 hours) - February 2005
Course of SAP/R3 (Pos 203) - Module PM (40 hours) - January 2005
Introduction to Safety at work (8 hours) - November 2004
Garbage selection and Disposal in the UN-RIO (8 hours) - August 2004
Course of SAP (POS 225) - Reports Subsea Installations (16 hours) - August 2004
Behaviour Auditing (16 hours). - Du Pont - July 2003
IADC’s Well Control Accreditation Program - Supervising (40 hours) - June 2003
Basic and Advanced Excel (32 hours) - September 201
Basic Industrial Instrumentation and Automation (32 hours) - November 1999
Team Management (16 hours) - September 1998
Fire Fighting â€" recycling course (08 hours) - July of 1997
IADC’s Well Head Safety Equipments for Subsea Wells (40 hours) - August 1996
Subsea Wet Connectors (20 hours) - April 1995
Maintenance on Hydraulic Systems (40 hours) - March 1995
Well Tests Interpretation and analysis II (40 hours) - October 1994
Christmas trees components and Peripherals - Module II (24 hours) - July 1994
Pansystem-Well Tests Interpretation Software (24 hours) - June 1994
Applied electronics (40 hours) - April 1994
Team Development (20 hours) - October 1993
Total Quality Management in DIRCRES â€" Well Completion Division (16 hours) - August 1993
Well Tests Interpretation I (40 hours) - August 1993
Cementing Operations in Well Completion (40 hours) - September 1991
Well Testing Operations (40 hours) - June 1991
Open Well Logging (40 hours) - November 1990
Production Facilities Instrumentation and Control (40 hours) - August 1988
FOREIGN LANGUAGES
English (IELTS â€" Proficiency Test on July 21st 2007): grade â€" 7,5 (overall)
English (The University of Michigan Proficiency Diplomaâ€"1986): passed.
French (University of Nancy- Alliance FranÃ* aise Pratical Studies - 1987): Fluent.
Norwegian and Spanish: Notions and basic oral ability.
Chinese (Mandarin): basic (ongoing studies).
CERTIFICATIONS, MEMBERSHIPS and OTHER COURSES
Certified as Project Management Professional (PMP) â€" PMI on September 10th 2008
IADC’s Well Control Certificate â€" supervisory-drilling-full â€" August 2007 (expiring Aug/09)
Member of SPE (Society of Petroleum Engineers) -1988 to 1994; reinstatement in 2009.
Member of CREA-MG (Conselho Regional de Engenharia e Arquitetura-Minas Gerais) from 1987
Certificate of Achievement in Elementary Norwegian Language and International Relations and Foreign Policy _ University of Oslo â€" Norway (June- August 1986)
Course on Oratory and Personal Marketing â€" 19,2 hours â€" by Dinamica Systems (14- 15 feb 2009)
Foreign Technical Mission in Italy: PIM (Pre-inspection Meeting) for the HRSG (Heat Recovery Steam Generator) Boiler at Macchi (Sofinter group) â€" 15 to 29 May 2009
REFERENCES
Eng. Wagner Destro - PETROBRÃS - Technical Advisor
Underwater Electronic Systems at The Subsea Services Unit - Prédio Lagoa de Imboassica - 3º andar Parque de Tubos Rodovia Amaral Peixoto â€" 11.000 CEP:27925-290 â€" Imboassica - Macaé â€" RJ Brazil â€"Tel: 55-22-2753-5156 Fax: 55-22-9824-7113
E-mail: wdestro@petrobras.com.br
Eng. LuÃs Cesar -TRANSCONTROL - Technical Manager-
Address: Rua Ourique 415-Penha Circular - Rio de Janeiro RJ - Brazil
Tel: 55-21-2564-6371 Fax: 55-21-2560-4416 cel: 55-21-8868-6841
E-mail: lcesar@transcontrol.com.br
Sérgio Fonseca da Silva - General Manager -Piranema ServiÃ* os de Petróleo Ltda.
Avenida Pedro Paes Azevedo, 34 - Salgado Filho, Aracaju â€" SE â€" Brazil
Cep: 49020-450 Office: (+55) 79 32266162 Fax: (+55) 79 32266170
E-mail: sergio.fonseca@piranema.com.br
Ricardo Luiz Fonseca da Matta â€" Analista de Sistemas da Petrobras/Engenharia/IERG
Rod BR 381 (Fernão Dias) â€" Km 427 â€" Portaria 3 da REGAP â€" Betim
CEP: 32530-000 Tel: (+55) 3529-4141
E-mail: damattar@petrobras.com.br
Duarte Nunes Coelho
Senior Petroleum Engineer - Retired
Rua La Plata 181 / 900 Sion
Belo Horizonte â€" MG - Brazil
Tel: (+5531) 3281-5941 Mobile: (+5531)9128-9541
E-mail: duartecoelho75@gmail.com
KEY WORDS
PMP, Project Management, PMI, Experienced, Petroleum, Professional Engineer, Drilling, Completions, Work over, Sand Control, Formation Evaluation, Well Testing, Data Acquisition, Interpretation, Pan System Software, Subsea Equipment, PDG, installation, maintenance, Subsea, Control Umbilicals, Wet Xmas Tree, Subsea Manifold, Drill Pipe Riser, DPR, Offshore, Company Man, Semisubmersibles, Drill Ship, Rig Supervising, Deep Water;
Landmark software, DIMS, Open Wells, Computer literate, internet, MicrosoftWord, Excel, PowerPoint, MSProject, Monte Carlo analysis.
Mechanical Engineer, BSME, MBA, Cost, Enginering, Planning, Staff Engineer, accountable, language skills, english, french, portuguese, proficient, norwegian, spanish, strategic thinker, focused on results, good communication, managerial abilities, leadership, creative, self starter, negotiation skills, team worker, relocate.
Belo Horizonte, MG - October 2009
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1851 to 1900 of 7051)
Go to Search Parameters...
Brief Description
Offshore Rig Safety & Training Coordinator.
Drilling high angle & horizontal wells, H2S, perform injection & production completion, well testing. Experienced in directional drilling, dealing w/ anti-collision, etc.
Innovative career in the field of electrical power engineering: Installation, Service and Commissioning
electrician
A total of 6 years of industrial experience which includes 2 years of production & commissioning experience in an Indian Refinery and 4 years of Advanced Process Control experience with Honeywell India & Aspen Tech Middle East.
AN EXPERIENCED BOILER AND PIPELINE DESIGN ENGINEER
EXPERIENCED PETROLEUM ENGINEER and PMP (PROJECT MANAGER), DEEP OFFSHORE, DRILLING, COMPLETIONS, SUBSEA EQUIPMENT AND CONNECTORS
Safety and Risk Researcher
I am Civil Structural Engineer having detail engineering and design experience of Oil & Gas industries. I have done my BS in Civil Engineering. I got exposure in the design of Civil & Structural components of Oil & Gas Plants.
Completed MS and BSc in Geology. Working in the Geological Survey of Bangladesh as an Assistant Geologist on 18 February 2007. My duties is to make Geological Reports, Geological Mapping, Environmental Observation, Identifying the Hazardous zones, River and Shore line Erosion observation
Project Manager with 19 years of hands on Experience of Executing Green field projects of Hydro & Pyrometallurgy- Zinc, lead & Copper, Cu SX & EW, Cobalt SX &EW, Leaching & Flotation plant, Copper Smelter. Transmission lines, HT & LT motors upto 7700KW, VVVF upto 5MW, Hot & Wet ESP's.
Over 17 Years of professional experience in Piping, Basic & Detail engineering of Offshore(FPSO, FPU & Wellheads), Onshore Refineries, Petrochemical plants, Oil field developments, Fertilizers, Chamical, Process and industrial plants of various types with excellent knowledge in Industry standards
Lead/Senior Instrument Designer 13years experiance with PDS Intools & programming skills. Intools ADministrator. SPI 2007 Administrator. Smartplant Intools Administrator
Diploma in Mechanical Engg & Having 10 years experience as a Piping Designer / Draftsman in OIL & Gas field
Sound technical knowledge of broad range of electrical transmission & distribution products, excellent knowledge of preparation of tenders and contract management, Good experience in EHV Turnkey Projects with Proven success record into complex environments
API 653 Qualified Inspector having experience in Static Equipment Inspection
Well Stimulation Engineer
Pre-Comms. Rep/Witness for Umbilicals , Subsea Controls/hydraulics
GIS Analyst
I am technically sounded professional having design, Construction, Erection & commissioning engineering experience in Field instrumentation & Systems. I have exposure in various industries like hydrocarbon industry, Power Plant industry, etc. I look for a suitable position in a design engineering or
Instrument and Fire ans gas Maintenance
Experienced Instrumentation and Control Engineer with extensive knowledge in PLC, SCADA, RTU and Network programming, Engineering Schematic development, Troubleshooting, Project commissioning and latest Industry standards.
Petroleum Engineer, I have three years of experience in the Oil Industry, specifically in Petroleum of Venezuela (PDVSA) as Production optimization Engineer and thermal engineer (Alternate and continuous Steam injection), Experience on wells, producing under artificial
Expert to work with ORCAFLEX ,ORCALAY,OFFPIPE,AGA Software - Able to work with CAESAR II,SAGE Profile,MOSES,AUTOPIPE,MATHCAD - Worked with DNV 1981,DNV 1996,DNV 1998 (Guideline No. 14),DNV 2000 (OS F101),DNV RP B401,DNV PR F103,DNV RP E305,DNV RP F105,DNV RP F107,BS 8010, BS 7910, API 5L, ASME B31.8
Mud Engineer (senior) experienced motivated ready to relocate works anywhere
Geoscientist, Senior reservoir modeller. Geostatistician. Scientific software developer
Over Eight years experience in the field of Quality Assurance and Quality Control services. Have performed inspections in the fields of Oil-Refinery, Petro chemical plant, Power plants, Structural Steel Fabrication shops, Flow line construction.
Extensive work experience and proficiency in the area of PLC,SCADA,HMI, Industrial Communication driver development/networking and Field instruments in a carrier spanning of 10+ years of experience in the sector of Oil & Gas, Water and Waste water treatment, Power, Pharmaceuticals, Chemicals, Packag
• Bachelor of Engineering in Mechanical from Bharathidasan University Nov-99
HSE Supervisor/ DP operator/ HLO/ Chief officer
University of Oil and Gas – Ploiesti, Engineer 2003;- BOSIET OPITO & H2S Induction - Survival Course in Malta at International Safety Training Center- with degree and personal safety logbook valid until Nov. 2008, Specialized certification course in “Programming annalist” – Windows, dBase, Fox
Checker/Sr. Piping Designer having a very good exposure in Piping layouts for Oil and Gas , Refineries and petrochemical plants, checking of Isometrics, MTO, Piping layouts, good working experience in PDS Desinn review.
* Membership in ASET and with work experience in instrumentation and control systems field. * Familiar with field instrumentation and industrial control system. * Experience in multiple loop control systems, PLC, DCS, SCADA systems * Fluent in computer and AutoCAD drawing skills.
A professionally qualified and technically competent Data Management Analyst, with 14 years experience in Well log Data Processing and Petrophysical Data Management.
To receive a laboratory, Technical, Analysis or Research position working in the Petroleum and/or Oil Field.
I am having Bachelor Degree of Mechanical Engineering certificate. I have 7 years experience in Qa/Qc field and 10 years experience in production field. And also I have completed the AWS-CWI,NDE Level II.
Piping design, pipe supports, project coordination. 25 years experience in petrochem industry. Autocad, word, excel, office. Motivated and available.
Over 25 years of experience in the oil and gas industry in: Quality Control and Inspection of Materials, Weld Inspection, Blasting and Coating .Management of personnel and administrative staff. Certification and condition assessment activities of both new and in-service equipment.
HSE specialist with chemical/process engineering background seeking environmental or HSE role within the oil/ gas and construction industries.
Please find below my details of experience for Estimation Engineer Position. I am a diploma mechanical engineer and keen in excelling in my career with hard work and accepting higher responsibilities.
Senior Pipelines Engineer with 16 years experience with International Consultancies.
Senior Training Officer, Mechanical with 17 years of extensive knowledge and experience in all aspects of technical training. Planned, developed, designed, conducted, mechanical training programs following the approved Competence Development Programs, ensuring mechanical fitters, tradesmen and techn
Engineering, Design, Installation, Commissioning, Programming, Management, Consultancy & Upgrades etc., for all types of Instrumentation & Communication Projects for Oil & gas Industry, Paints, Refinery, Petrochemical and Glass. Preparation of Design Basis Scoping, Functional Specifications Document
Procurement Engineer with 14year Exp. in Oil/Gas/Engineering Industry, Qualification Diploma in Fabriction Engineering
Oil & Gas Production Chemistry, Chemical Engineering, Corrosion Engineer, Process Optimisation, Production Chemicals Optimisation, Corrosion/Scale Prevention/Inspection, Process and Environment Monitoring, Well testing/completion design, Process design/waste water management, Extensive field experie
I am an innovative thinker with a demonstrated ability to improve production and decrease down time. I am very adaptable to changing projects and work schedules and have a proven ability to quickly train on different facilities. I have excellent planning and organizational skills
Degree in Electronics & Instrumentation with 6 years of experience in Engineering and Projects, Trained by various Instrumentation Vendors, Hands On experience in SCADA & PLC Systems, Field instrumentation, Vibration monitoring system (SKF), witnessed FAT for Electrical and Instrumentation Packages.
Mechanical/process/system completion commissioning and handing over
PHDWin, Field Direct, PA, Petra, OFM, MS programs, AS400, Wellcore, Webcore
PDMS Administration involving Teams, Users, Dbs,MDB. Access control rights and Roles management,Clash Manager Administration.
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
[ 38 ]
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com