Resume - 31 years experience as Drilling/Workover Superintendent, Drilling Supervisor and...

Misco Jobs

Resume #878

CONTACT INFORMATION:
View contact information...

R E S U M E

WORK EXPERIENCE SUMMARY

SONATRACH                            Aug. 2001 to Feb 2002

Drilling Engineer, Expert I, at Hassi Messaoud, Algeria. Worked on studies to improve drilling efficiency and reduce costs of drilling, including all Engineering and Operational aspects. Most wells are >4000 m horizontals with >3000 m TVD, requiring mud densities over 2.0 s.g.

WAHA OIL COMPANY                        Mar. 2000 to July 2001

Staff Drilling Engineer: in Libya. Part Wellsite Drilling Supervisor on 17,100 ft. exploratory well in the desert, part Drilling Engineer in the Tripoli office, writing programs for exploratory and horizontal wells, as well as providing technical and operational support on ongoing drilling wells and workovers.

FRONTIER ENGINEERING                    Nov. 1998 to Jan. 2000

Wellsite Drilling Supervisor (June 1999 to Jan. 2000) for: Canadian Natural Resources in north-central Alberta on shallow, long-reach, horizontal drilling in a heavy oil zone; Cometra Energy in Alberta and B.C. on 700 - 2100 m wells; for Petromet Resources on a 3110 m foothills well; Real Resources in eastern Alberta on 8 directional holes to 1100 m from 18 – 50 deg. hole angle.
Wellsite Drilling Supervisor (Nov./Dec. 1998) for Conoco Canada in the foothills region of west-central Alberta. Deviation problems were severe, due to up to 40° formation dip, from spud. The pay zone (gas) at 2500 m was drilled with nitrogen through a snubbing system. Liner and completion were also snubbed in.

NORTH AEGEAN PETROLEUM COMPANY            Mar. to Sept. 1998

Drilling Engineer/Superintendent: in Kavala, Greece, preparing cost estimates, drilling programs and AFEs, negotiating service, materials and drilling contracts and expediting same and overseeing preparation of equipment and materials for a 2 to 3 well offshore, exploration drilling project. All wells were drilled using a mudline suspension system. Drilling superintendent duties began with the arrival of the jack-up drilling rig on Aug. 2, 1998.

GRACE, SHURSEN & MOORE, INC.                Nov. 1997 to Feb. 1998

Wellsite Drilling Supervisor: in Pakistan for Mari Gas Company on a 12,800' well requiring two intermediate casing strings. Long intervals of gumbo clays and plastic marls required a KCl, inhibitive, weighted mud.

BURNISH ENTERPRISES LTD.                    Oct. 1996 to Nov. 1997

Sand Control Specialist: directed technical, in-house project for CS Resources to solve sand control problems in their heavy oil SAGD projects (horizontal wells), including specialized lab testing.
Wellsite Drilling Supervisor: in western Canada for Cdn. Natural Resources, Cometra Energy, and CS Resources, including single leg and multi-lateral horizontal drilling.

GRACE, SHURSEN & MOORE, INC.                    Sept. 90 to July 96

Workover & Drilling Superintendent: Monitoring/directing difficult workover operations for North Aegean Petro. Co. on two oil platforms, offshore Kavala, Greece. Problems on all wells included 60% H2S, up to 1800 kg/m3 formation pressures, asphaltic deposition, severe corrosion, dual string completions, and multiple fishing and milling jobs. Operations included coiled tubing cleanouts (including with slimhole motors), directional drilling, liner cementing, running tieback strings, chemically and explosively cutting tubing, xylene and acid stimulations, perforating, servicing downhole safety valves, and production logging. All fishing tools were operator-owned and all fishing operations were directed by the Superintendent. Also, directed the drilling of 6 wells with a jackup rig, including one off-platform exploration well and a long-reach horizontal well with 3000 m displacement.

FRONTIER ENGINEERING & CONSULTING LTD.        Aug. 1989 to Aug. 1990

Drilling Engineering Specialist: Consultant to Petro Canada International Assistance Corporation (PCIAC) on a Canadian Technology Exchange Project in Kenya, Africa. Trained 3 Assistant Drilling Engineers in the areas of Drlg Eng'g and Operations on a Kenya Power Co. geothermal drilling project near Naivasha, Kenya. This included continuous lost circulation; air, foam and aerated water drilling; and associated casing cementing problems with massive lost circulation. Simultaneously, I was advisor to the Senior Drlg Engr and the PCIAC, on-site, Drilling Supervisors, on technical and operational drilling problems.

ALBERTA ENERGY COMPANY                    Nov. 1988 to July 1989

Staff Drlg. Engineer: As a result of a corporate take-over of Chieftain Development, was transferred to Calgary, working in all aspects of Drilling Engineering.

CHIEFTAIN DEVELOPMENT CO. LTD.            July 1987 to Nov. 1988

Drilling Manager: One person drilling department in charge of all aspects of Drilling Engineering and Operations except for lease construction. Prepared all cost estimates, AFE's, well licence applications (including Emergency Response Plans on sour wells), and detailed drilling programs. Chose all services, drilling rigs, contracts and wellsite consultants. Monitored and advised on all daily drilling operations as Drilling Superintendent. Purchased all wellsite materials. Looked after the drilling of 44 wells ranging in depth from 500-3600 m in northern and western areas of Alberta. Drilled, in record time, 35% of all wells over 1200 m deep (6 out of 17 wells).

BURNISH ENTERPRISES LTD.                    Nov. 1980 to July 1987

Office Engineering: Programming and coordinating of drilling projects for APL Oil & Gas, Frontier Engineering, Canterra Energy, Atlas Yellowknife, Atlantis Resources, Gane Energy and Saskoil Resources.
Wellsite Supervisor: Supervision in drilling (straight and directional) and completions on wells throughout Alberta for APL Oil & Gas, Erskine Resources, Canada Northwest Energy, Frontier Engineering, Barlon Engineering, Esso Resources, Sienna Resources, Atlas Yellowknife, DeKalb Petroleum, Atlantis Resources, Ladd Exploration and Saskoil.
Project Engineer, Turbodrilling (Aug. 1981 to Dec. 1982): Co-ordination, supervision and repairs on Soviet-built turbodrills used in a research testing program by a consortium of Canadian oil and service companies. This included liaison with a group of Soviet engineering advisors, on site in Canada. I was also involved in three technical/business trips to Moscow, one without an interpreter.
Consulting Engineer, Drlg & Completions (Feb. 1981 to July 1981): Doing drilling and completion programming, wellsite supervision, cost estimating, cement testing, casing and cement design, drill stem testing and material expediting on 14,200' wildcat well (50% office engineer/superintendent and 50% senior wellsite supervisor).

PETRO-DRIL INTERNATIONAL LTD.                July to Oct. 1980

Vice-President of Engineering: Responsible for implementation of safety and training programs. Involved in rig design of two National 370 diesel/electric rigs.

DOME PETROLEUM LTD.                    Feb. 1973 to July 1980

Manager of Drilling Engineering (April 1979 to July 1980): In charge of 16 engineers and technologists responsible for drilling engineering of all of Dome's land operations. This involved 45 drilling rigs. This group did drilling programming, AFE cost estimating and daily monitoring of drilling operations.
Manager of Drilling Technology (May 1977 to April 1979): Some of my projects were:
    (a) Developed the technique of using weighted mud to prevent and control sloughing shale in foothills wells. Published article in World Oil, April 1978 entitled "Weighting Fresh Water Muds Stabilizes Pressured Shales".
    (b) Developed a computer program, SLKAUTO, for the procedure to land tubing in permanent packers.
    (c) Spent summer of 1977 as wellsite drilling engineer on one of Dome's drill ships in the Beaufort Sea (Arctic Ocean). Overpressure problems forced us to have a mud weight of 17.8 lb./gal. at 9450 ft.
    (d) Specialization in mud rheology, solids control and primary cementing.
    (e) Was engineer in charge of drilling and completing the deepest well ever drilled by Dome Petroleum (4500m) near Obed, Alberta.
    (f) Programmed and supervised the changing of 7" tubing into a live underground propane storage cavern without snubbing equipment.
    (g) Consultant and troubleshooter to the Drilling Department on complex and difficult drilling or completion problems.
    (h) Spent one month in the Soviet Union as on site Drilling Engineer on a well in the permafrost region of the Soviet Arctic (including one week as interpreter).
Drilling Engineer (Sept. 1974 - May 1977): The responsibilities there included programming and wellsite supervision of drilling, completions and workovers in most gas areas of Alberta; about 30% field work. Contingent with these responsibilities I did all of Dome's drilling cost estimates for a one-year period.
Reservoir Engineer (Feb. 1973 - Sept. 1974): Responsibilities included reservoir analysis, company property appraisals, reservoir model studies and pressure build-up surveys. Both office calculations and field supervision were carried out by me on the build-up surveys. The results of one reservoir modeling study were the basis for a 100 well development drilling program.

PERSONAL DATA

Graduated with a B.Sc. M.E. in 1969 from the University of Manitoba in the top 10% of the class standing.

Birth Date: August 3, 1947, Canadian citizen.

Marital status: Married, 3 children, born April 27/87, May 21/88, Aug 20/91

Fluent in English, Ukrainian and technical (oilfield) Russian.

Proficient in computer use. Experienced user of: Excel, MS-Word,WordPerfect, DOS, WINDOWS 95/98, most types of computer hardware, anti-virus programs and utilities for hard disk management. I personally own and maintain 4 computers.

Have valid Second Line Supervisors Well Control certificate from the Petroleum Industry Training Service in Alberta, Canada.

May 15, 2002

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 6635)

Go to Search Parameters...

Brief Description

Oil field engineering and supervision specialist with responsibility for management, supervision and evaluation of drilling and production operations.

I have experience in oil/gas/power plant as Supervisor-Mech&Trainer Mech

I am seeking an entry level position, I have experience has a technician but not in the oil industry.

Chemical process engineer, oil/gas, refinery, gas processing, production, operation, process engineering, commissioning, test run, performance guarantee run, HAZOP STUDIES, simulation, energy audit, energy conservation, PFD and PID review,

A professional development on modernizing engineering projects

American with experience in Production-downhole & surface, Management, Completions, Facilities Design & Construction and Workover Engineering with major Oil Companies both domestic and international for the past 25 years.

I have served as a Project Manager, Estimator/Scheduler and Senior Piping Designer in the Petro-Chemical Industry. I have a varied background from technical, maintenance, construction, engineering, and management perspectives.

Drilling Manager / Superintendent / Engineer with extensive, broad based, worldwide experience in drilling operations, including deepwater drilling and remote locations.

A Field Operations / Production Engineering Manager with wide experience in oil and gas production projects. Has excellent skills in production technology / artificial lift / potential EOR screening / scheduling and management of oil and gas upstream & downstream engineering projects.

Extensive experience as a project engineer, piping engineer, engineering manager and project manager for design and construction of gas plants, refineries, cogeneration plants, LNG plants, cross-country pipelines, LPG storage and loading facilities.

Worked on many projects internationally in the Electrical and Instrumentation fields as Technician, Supervisor and Superintendent.

Petroleum engineer with 25 years of energy industry experience. Strong quantitative and analytical skills. Experience includes acquisitions, management, reservoir analysis, economic evaluations, exploration, production and natural gas pipelines. Prefer to stay in Dallas-Fort Worth area or Houston.

31 years experience as Drilling/Workover Superintendent, Drilling Supervisor and Snr Drilling Engineer. B Sc ME. Horizontal, directional, high pressure, high H2S, onshore and offshore (platform and jackup)wells. Worked in Russia, Kenya, Greece, Pakistan, Libya and Algeria.

I am seeking an exploration or a trend development geologist position where I can find reserves for a company by generating well documented low risk prospects and add significant value by identification of additional opportunities on existing acreage.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

drilling Engineer or drilling manager

Summary: I have extensive knowledge in: Cost Analysis, Scheduling, Management, Negotiations, Proposals/RFI/RFQ, Team Leadership, Supervisor, Project Lead, Workshop Development, Document Control, Technical Lead, Technical Writer/Proposal/Reports Writer, Training

To become associated with an integrated international oil and gas company in a managerial or senior staff position in Exploration and/or Operations Geology.

Mechanical process engineer with design, engineering, and operations experience in power, oil and gas and petrochemical.

Twenty-two years experience in production, reservoir and evaluation engineering of both major and independent oil companies. Areas of experience include Rocky Mountain, Mid-continent, West Texas, Gulf Coast, Argentina, and Venezuela.

Managed and implemented product, equipment, and process design/modifications in manufacturing and engineering including new product introductions.

I am a Mechanical Engineer with extensive experience in project management, terminal facilities, pipeline design, construction, operations, maintenance and onshore/offshore equipment specifications.

OBJECTIVE A Production engineer/Technologist with 20 year’s experience in the oil industry in Nigeria and the Netherlands.

Sole Proprietor of Bass Energy Company, a consulting firm specializing in drilling, operations and producing property acquisitions. Available for domestic and international assignments.

Summary Job Description: Senior Petroleum/Production/Reservoir Engineer specializing in: Field / Well Performance and Analysis Production Monitoring and Enhancement Cost Reduction and Optimization Team Management

20 years in Civil Finishing works / Insulation as Per CINI /Waterproofing/Anticorrosive Treatment/Painting as per ERS.

17 Years experience as a well log analyst. Contract handling, work over planning, production logging interpretation, management services, asset management ect.

Dear Employers, Through my resume you could evaluate my qualifications and experience in the field of ELECTRICAL & ELECTRONIC ENGINEERING – installation, maintenance and repair of different types of equipment.

I am a mechanical engineer. At Present days, I am working at PT. EXSPAN NUSANTARA as Production and Facility Engineer. My main responsibilities are handling crude oil production and optimization and designing and optimizing facilities.

25+ years experience - Gulf of Mexico, California, Alaska, and International. Fast working, self-starting, and dependable. Team player or individual contributor. Computer experience includes Landmark SeisWorks, Z-Map+, StratWorks, EarthCube, Geosoft "Montaj", and Stratimagic.

I have been working in the Petrochemical and Refining area since 1982 up to date from the level of control & optimization engineering up to Consultant level going through Management and Advisor positions. Open for opportunities overseas. Available September 2004 for new challenges.

Although its cyclical nature has separated me from the oil and gas industry for several years, the new amenable political climate has restored my excitement at the prospect of applying my expertise to new and challenging projects and I believe that my education and experience aptly prepares me.

Static Equipment Engineer

Job Application

Registered mechanical engineer with expertise in Plant Design and Piping

Process engineer . Results oriented Professional Engineer with 11+ years experience in oil & gas in multi positions design/supervisory/instructorMulti-disciplined versatility with superb trouble-shooting and analytical skills to assess problems and provide expert on-site reliability solutions .

Pipeline-Mechanical-Engineer

Experience of Ammonia / Urea Operations and process engineering

QHSE Supervisor/ HSE Supervisor/ H2S Specialist

14 years of national and international experience in onshore/offshore feasibility studies, process simulations, detailed process design, project execution, cost estimating, proposal preparation, project management, operations, plant performance tests, and quality control.

Electrical/Instrumentation Technician, Offshore/Onshore Oil Gas and Marine

Primavera P3, MS Project, Communication skills, management capability

•Expertise in ESP design, installation, operating, monitoring, optimization, diagnosing and trouble-shooting, •Production Operation and Technology application, •Team leader and supervisory role for production engineering teame, •Good communication skills

I am an experienced Marine Engineer with CHIEF ENGINEERS CERTIFICATE OF COMPETENCY & having a service experience of about Ten Years of which last Four Years in companys top level management,with extensive technical expertise in handling the repair and maintenance works of a wide spectrum of machine

A 32-year-old Married Algerian Citizen, Graduate Telecoms Engineer specialized in wireless, and SCADA Systems with an experience in providing desktop, network and communications support. Excellent team working abilities and a high degree of flexibility.

Degree Mechanical Engineer - Piping Design

Technical Support Geophysicist for Landmark 2D/3D Seismic Interpretation products,Expertise in 2D/3D Seismic Interpretation for Exploration & development

Technical coordination for all engineering items.Fully authorized technical manager to wrap up technical problems between Contractor & Client

A mechanical engineer with diploma , having 16 yrs of experience, now working with a leading fabrication company in Dubai - United Arab Emirates as deputy manager. knowledge in manufacturing of equipments for oil field, transportation and storage industry in steel and alloy steels

I work for the JV SH-AGIP. During my work experience I used VIP and Eclipse softwares. I built reservoir simulation models mainly black oil models and I published some SPE papers in different meetings worldwide.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out