Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #87863 next resume »»
CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE

Pressure Vessel Specialist
Air Liquide Process & Construction, Houston TX (5/2007-10/2009)
q Performed, reviewed and validated pressure vessel designs, drawings & calculations, both API620 and ASME coded cryogenic tanks such as liquid nitrogen (LIN) and oxygen (LOX) tanks.
q Performed sizing of pressure swing adsorber (PSA) vessel based on fracture mechanics and fatigue analysis to Appendix 5 of ASME VIII-2.
q Supported Project Procurement activities: Review Technical Bid from suppliers, Participate in kick off meeting with suppliers.
q Prepared procurement technical packages for pressure building up coil, manual valves, root valves and pressure vessels, and developed sketch for liquid nitrogen tank (LIN) API620 tank nozzle configuration and adsorber vessel pre-sizing calculations.
q Supported project procurement activities: prepared technical and commercial bid tab and reviewed the technical bid from suppliers, and participated in kick off meeting with adsorber vessels fabricator in projects.
q Reviewed vendor technical drawings and specifications against Technical Specification for in-line device and pressure vessels and updated technical specification to reflect as purchased basis.
q Supported procurement supplier qualification activities through supplier technical audits, such as helium leak test and manual valves.
q Coordinated with Project Engineer and System Engineer on comments and modifications to the project P&IDs.
q Provided technical assistance during commissioning, permitting, erection and start-up such as the test flange verification, cold box nozzle modification.

Project Engineer ASME Certificated Member (8733347)
Veolia Water Solution & Technologies, Santa Fe Springs, CA (10/2006-5/2007)
q Reviewed drawings and approval for fabricationq Prepared and tracked the project schedule q Sent drawings and engineering information to customers as required on contractsq Prepared requests for quotation package for all components q Prepared and revised drawing package and purchase order requisitionsq Worked in KD Edwards accounting system for tracking projects and purchases and q Checked ASME VIII-1 code calculations and vessel fabrication drawings from vendorsq Involved project of SUNCOR Canada SAC (Strong Acid Cation) Series Softeners and CRN registration applications q Responsible for project of three Auto-Jets for Summit Valley Inc.
q Responsible for project of two vertical SAC Series Softeners for AUGUST Inc.
q Completed stress analysis for a brine ion exchange piping system

Mechanical Design Engineer / Structural Analyst, ASME Certificated Member (8733347) Maxfield Inc., Calgary, Canada (4/2003- 10/2006)
q Stress analyzed and designed a fire tube under operating load (stress due to dead load coupled with thermal stress) by Appendix 4 ASME VIII, Div. 2
q Evaluated fatigue life of large vertical vessels due to wind and seismic vibration by Appendix 5 of ASME VIII, Div. 2
q Designed and interpreted the calculation of highway pressurized cargo transports to CSA B620, 49CFR and ASME VIII-1 & 2 codes for Transport Canada Registration Number (TCRN) and Department of Transportation (DOT)
q Designed and calculated storage horizontal and vertical pressure vessels by ASME VIII-1 & 2 codes for Canada Registration Number (CRN)
q Code calculated & verified a 140,900 USWG 140" ID Butane Storage Vessel by FEM
q Completed registration calculations (both ASME code calculation & FEA) for pressurized cargo transports: 8 Axel "B" Trains LPG/NH3/CO2, BOB Tails, and Tri Axle Trailers q Analyzed seismic and winding dynamic stress response of large vertical pressure vessels such as a large vertical vessel built by Chevron in Vancouver, BC
q Designed an 8,000 USWG 72 inch ID pressurized CO2 cargo transport for Calfrac Ltd.
q Designed & code calculated 42,000 USWG 140 inch ID LPG storage vessel for Ford Energyq Designed & code calculated 1,000 USWG 40 ½ inch ID vertical dispenser for SuperSave q Designed & code calculated 30M, 84M and 90.5M 129 inch ID LPG storage vessel for Encanaq Designed 36M, 63M and 105M 120" ID CO2 skidded storage vessel for Ferus Gas q Designed 36,000 USWG skidded storage vessel for Mutual Propaneq Designed & code calculated 90,500 USWG 129" ID storage vessel for Plains Marketing q Designed & code calculated 61,700 USWG 129" ID storage vessel for Plains Marketing q Analyzed hydrostatic testing collapse of a 156" ID 105,000 USWG NGL storage vessel and designed a new hydro-test skid q Designed and stress analyzed rig mats and support saddle extension for storage vesselq Designed and stress analyzed skid for storage vessel q Revised structure of vertical pressure vessels by FEAq Verified and modified attachment designs of vertical pressure vessels by FEA
q Designed sub-frames of pressurized cargo transporters by FEA
q Designed and analyzed a rectangular tank (TC44 tank in Canada and MC44 in US)
q Analyzed thermal transfer and dynamic stress response of N2 cryogenic pressure cargo transport q Piping design (B31.3) for CO2 pressurized cargo transports q Conducted a project research in explosive containment vessel & designq Piping (B31.3) design for 36,000 USWG 120" ID CO2 storage vessel for Ferus Gas q Piping (B31.3) design for 36,000 USWG 120" ID CO2 storage vessel for Canyon Service q Piping (B31.3) design for 64,000 USWG 120" ID CO2 storage vessel for Ferus Gas q Piping (B31.3) design for 30,000 USWG 120" ID LPG storage vessel for Mutual Propane q Piping (B31.3) design for pressurized CO2 cargo transport for Calfrac Ltd.
q Pressure vessel ladder and platform design q Pressure vessel bridle piping and bridle design

Structural Analyst / Mechanical Design Engineer
Institute for Space Research, Calgary, Canada (4/2001- 4/2003)
q Involved the project of Enhanced Polar Outflow Probe (e-POP), the first made-in-Canada multi-purpose small satellite mission financed by Canada Space Agency (CSA)
q Designed and revised electro-mechanical instrumentations q Analyzed thermal transfer and thermal stress for satellites and mounted instrumentations by FEM
q Simulated instrumentation vibrations of a micro-satellite in different launch phases q Designed a lifting arm for moving instrumentations into the calibration facility of ultraviolet vacuum tank q Package designed Suprathermal Electron Imager and Ion Rapid Imager used in exploring out-space environment in Venus and Mars q Revised micro-satellite mechanical design for Enhanced Polar Outflow Probe

Research Associate
Advanced Engineering Design Laboratory University of Saskatchewan, Saskatoon, Canada (5/1999-4/2001)
q Developed a new method for robotic inertia force and moment balance and the created new method was accepted by ASME and published in ASME Journal of Mechanical Design.
q Designed a re-configurable five bar robotic manipulator with two degrees of freedom q Supervised the manufacturing procedure of the five bar robotic manipulator and responsible for the purchase of electrical accessories such servo motors and controllers q Designed a PID control system to simulate trajectory tracking and vibration control for a balanced parallel manipulator q Conducted one project research financed by Natural Sciences & Engineering Research Council (NSERC)

Lead Research Engineer
CAD/CAM Research Center, Northeastern University, China (5/1992-4/1999)
q Helped an electric motor company in China customize a CAD applicationq Instructed engineers in the use of Solidworks, AutoCAD and Mechanical Desktop q Developed CAD/CAM system for Industrial Steam Boilers q Cooperated on the Chinese mechanical standard development of AutoCAD

Mechanical Manufacturing Engineer
Machine Shop of 17th Metallurgical Construction Corporation, China (11/1986-8/1989)
q Responsible for manufacturing processing procedure for mechanical parts q Supervised manufacturing processes at machine shop q Estimated time of manufacturing process and manufacturing cost q Responsible for handling OEM projects q Designed fixtures/jigs for the manufacturing of specific ordered components q On site technical assistance at machine shop

EDUCATION
q M. Sc. in Mechatronics (2000)University of Saskatchewan, Canada q Ph. D. in Mechanical Design and Theory (1998) Northeastern University, China q M. Sc. in Mechanical Design and Theory (1992) Northeastern University, China q Graduated in Mechanical Manufacturing (1986)Eastern China Metallurgical University, China

SKILLS
q Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP
q Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3
q Skill at using the knowledge in WRC107 & WRC279
q Computer Languages: EXCEL VBA, VC++, VB, Matlab, Fortran, Autolisp

OVER 20 PUBLICATIONS, SUCH AS:
q "140,900 USWG 140 Inch ID Butane Storage Vessel Calculation and FEA Verification," 2005 ASME Pressure Vessel & Piping Division Conferences, PVP2005-71123, Denver, Colorado, USA
q "Dynamic Characteristics of Rolling Mill Drive Trains with Backlash-Mathematical Simulation and Results," 1999 ASME Design Engineering Technical Conferences, DETC99/VIB-8268, Las Vegas, Nevada, USA
q "Method of judging the self-excited vibration of rolling main drive system in rolling slippage," 1998, Journal of Vibration & Sound, Vol. 215, No. 5, pp. 1135-1143

View contact information...
«« previous resume next resume »»
Search Results (Resumes 51 to 100 of 7038)Go to Search Parameters...
Brief Description
Degreed electrical engineer with many years of experience in instrument engineering for oil production and refining, government facilities, water and wastewater facilities and nuclear sites.
CORROSION SPECIALIST & CHEMISTRY LECTURER
Operations engineer for oil and gas, shallow wells: drilling and workovers, projects evaluations.
Summary21years practical working experience in engineering design including in offshore and onshore and oil project.I worked at refrigerator, trawler,tanker,scientific and container ships.My professional experience has given me an in-depth knowledge of the El.Engineering in Marine/Petroleum branch
Oil Gas and Chemicals
Pipe Stress Analysis planning and detail studies, static analysis of piping systems, including: refractory pipe, jacketed pipe, High / Medium Temperature and Cryogenic piping connected to pumps, compressors, turbines, fire heaters, storage tanks & pressure vessels; underground pipeline.
Highly Experienced Crane and Lifting Engineer
Controls Engineer
Licensed Professional Engineer, performance oriented, with 25 years of extensive broad-based experience in multidisciplinary projects in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering, Procurement and Construction
Over 35 years of diversified experience as an instrumentation and control system /electrical power distribution engineer for petrochemical plants, refineries, synthetic rubber, carbon black plant and oil and gas fired power plants. Provided engineering expertise in the areas of project admin.
Free! I have over 35 years experience as an Instrument and Electrical Engineer in the Refining and Petrochemical Industries. I graduated in 1973 from the University of Louisville with a Master of Engineering with Specialization in Chemical Engineering degree.
Senior Cost Estimator with 20 years of progressive hands-on experience in petrochemical, oil and gas, and consulting engineering industries. Experienced in IPM Aspen Tech; Q-Estimate, Aspen Tech Kbase - ICARUS-2000, Exxon Estimating System, LULO Software - Venezuelan Commercial Cost Software, and SI
I am communicative, hard working. I easily integrate in new working and social environments as I have excellent communication skills and I am very open minded and flexible, I am responsible, ambitious and a real team player. I totally agreed and follow the HSE policy.
20 years experience with over 15 years of experience in design, engineering, and project management in the petroleum, and petrochemical industry. Successfully worked in different roles in oil industry in his 20 yrs career – engineering, project, and operation.
Professional Mechanical Engineer, Gas Pipeline Engineer, Metering Station Engineer, Project planning and Control Engineer, Project Engineer, Drilling Engineer, Project Manager
Principal Structural/Project Engineer with 16 years exp. in Oil & Gas Structures and Heavy Civils/Bridges. Worked in America, UK/Europe and Africa. Very diligent and precise but practical in appraoch. With a MSc in Engineering and PhD in Business providing excellent management and leadership skills.
Well site geologist or geologist operation
I have 20+ years of experience finding hydrocarbons in basins across the world; mainly through acquiring, processing and interpreting 2D and 3D seismic data and working together with geologists, engineers and landmen to put together economic drillable leads.
I wish to apply for the Full time post of Geologist, presently I am working as a Assistant Professor in Geology department of Poona College of Art’s, Science and Commerce, Camp, Pune ,Maharashtra affiliated to University of Pune, past 21 years at graduate level. During teaching Structu
I am 29 years experienced in HSE arena. It is Included in Oil and Gas, Petrochemical, Lamp Manufacturing and Gas Turbine Repair Shops.
Mechanical engineer with experience of the complete construction process of petrochemical plant from basic design to testing, commissioning, start up and final hand over. Having also a detailed knowledge and sound experience in the maintenance of petrochemical plants.
20 years experience in major integrated national oil company of India. Experience in production operations, process development, enhnaced oil recovery projects and research work related various operations of the company.
Instrument and Controls Engineer
Over 18 years total experience in design engineering, process systems, field engineering, project engineering. This includes design and specifications, chemical process analysis for Process Technology units, strong skilled in water treatment process. Proficient in the use of: AutoCAD, Microsoft Wind
Metallurgical Engineer, Metallurgsit
Economic and Reserve analysis, acquisitions, reservoir engineering in California heavy oil and Appalachian Basin natural gas
Process Engineer with 20 years of experience in EPC and operating companies
PROJECT ELECTRICAL ENGINEER
Structural Engineer • PROFILE • Demonstrated design experience in structural steel and concrete - Energy/Power and Oil/Gas industry. • Diverse heavy construction experience in buildings, pre-casting, bridges, highways, dams, estimation and bidding for construction projects. EDUCATION MS. Structur
Sr. Project Engineer/ Project Manager
3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal wells (oil & gas). 9 years w/Total (Argentina) as Drllg. Sup. onshore & 2 years as Coman Senior offshore ( jack up).Several positions f/Drllg trainee to Drllg Manager in Drllg Contractors Companies.
More than 10 years of experience coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore/onshore and subsea industries.
Petroleum engineer with over 23 years of oil and gas industry experience, including over 14 years of drilling fluids engineering in Romania, Middle East (offshore and onshore), Canada offshore (Terra Nova project) and onshore (Western Canada), Alaska, India and 9 years with Romanian drilling
Experienced oil & gas geoscientist in exploration, production and business development
I am a seasoned, experienced geophysicist/geoscientist & explorationist, and am updated with the latest technology, with in-depth experience in geophysics, as well as geology. I seek a suitable position in oil & gas G & G.
Free Lancer Nace Certified Coating Inspector, SSPC Certified Protective Coating Inspector, AWS Certified Welding Inspector, ACA Certified Corrosion Technologist 24 years of exp. in Coating field. Third party experience in Petro Chemical Industry for last 12 years
Instrumentation and electrical , DCS , PLC
HYSYS/PROII/NGL/LPG/LNG/SYN GAS - CONCEPTUAL, FEED AND DETAIL - REFINERY, NATURAL GAS, CRYOGENIC PROCESS, SOUR GAS REMOVAL, ADVANCED PROCESS CONTROL (APC), GASFICATION (BtL, CtL and GtL). DISTILLATION AND REACTOR. HYSYS/PROII/ Distillation/Separation Sequence/Pinch Analysis.
22 years experience in maintenance , compressor , generator , pump , drilling equipment , machine shop service , manufacture , inspection service , production , wire line , fishing tools , welding work , commissioning.
Condition Monitoring, Reliability Engineer
Pipeline, Piping & Mechanical Equipement design and construction support
Worked in exploration, production and academia
Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP; Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3; kill at using the knowledge in WRC107 & WRC279
Highly skills reservoir engineer with 18 years E&P experience and a Masters in Petroleum engineering Degree. Experience includes reservoir simulation, water flood design and management, EOR techniques, Heavy oil development, reserves evaluation, well test design and analysis & reservoir management
19 years experience in the Oil Industry with both service company & operators in UK, Oman, Australia, Brunei, Saudi, and Malaysia. Experience in Field Development Geology and geocellular modeling.
Position: Senior Instrument Engineer / Qualification: Master of Science (Electronics) - Queen’s University of Belfast
Professional Engineer with 19+ years of experience in engineering and project management, including design, sizing, and specification writing of various static and rotating equipments.
A seasoned completion/well intervention/well test professional with 18 years of experience with expertise in sand control, intelli.
the position of Chemist and subsequently to put my contribution for the growth and development of the company by utilizing my best efficiency and skills and to achieve my further career advancement opportunity.
Experienced Principal/Senior Control Systems Engineer who can contribute significantly to your company.
First   1   [ 2 ]   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com