Resume - 13 years oil industry experience,• Drill wells up to 6500 mt, High temperature g...

Misco Jobs

Resume #87902

CONTACT INFORMATION:
View contact information...

Position Held: Senior Drilling Supervisor.
Nationality: Egyptian.
Birth Day: 21/04/1972
Qualifications: ALazhar University, Faculty of Engineering, B.Sc. Petroleum Eng. on May, 1996.

Profile
* 13 years oil industry experience.
* Was work in Egypt, Saudi & Kazakhstan.
* Was on deep land rigs & jack up.
* Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment.
* Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom.
* Run expandable completion screen.
* Supervision of 120 multi national crew.
* Availability after one month, 28/28 B2B, welling to work overseas.
* I'm in team player and multi national environment.

WORK HISTORY;
COMPANY: British Gas.
KPO b.v. Karachaganak, Aksai, Burlinsky Region, 090300, West-Kazakhstan.
DATE: February 2009 - To present.
Position: Senior Drilling Supervisor.
* Drilling 6500 mt wells, with multilateral reservoirs, H2S Environment.
* Onshore Rigs for drilling and work over, completion operations.
* Drilled & worked over oil and gas wells (both vertical and horizontal wells using WBM and OBM systems.
* Run 5 1/2" completion assy.
* Run smart well completion for multi-lateral holes.
* Drilled wells with Directional assy., including Turbines and Mud Motor PDM's& RSS (power drive, GeoPilot, Out trac).
COMPANY: Aramco in Kingdom Saudi Arabia.
DATE: December 2005 – January 2009.
Position: Senior Drilling Supervisor.
* Onshore Rigs for drilling and work over, completion operations.
* Drilled & worked over oil and gas wells (both vertical and horizontal wells using WBM and OBM systems.
* Run 5 1/2" expandable liner.
* Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom.
* Run expandable completion screen.
* Run smart well completion for multi-lateral holes.
* Drilled multi- lateral holes& fish bone holes (5 laterals).
* Drilled wells with Directional assy., including Turbines and Mud Motor PDM's& & RSS (power drive, GeoPilot, Out trac).
* Experience in blind drilling and curing total losses.
* Experience in tight hole and stuck pipe recovery.
* Experience in open hole and cased hole logging. Supervision of reverse threads & cut operations.
COMPANY: BAPETCO/SHELL –Egypt.
DATE: March 2001- November 2005.
Position: Senior Drilling Supervisor.
* Drilling gas and oil wells (deep wells – vertical, slanted and horizontal), deep deviated wells, High temperature gas wells, Drilling of horizontal slim hole sidetracks.
* Onshore Rigs for drilling and work over, completion operations.
* Drilled & worked over oil and gas wells (both vertical and horizontal wells) for Bapetco in the Egyptian western desert using WBM and OBM systems.
* Experience in blind drilling and curing total losses.
* Experience in tight hole and stuck pipe recovery.
* Experience in open hole and cased hole logging. Supervision of reverse threads & cut operations.
* In charge of fishing and milling operations.
* Participate in DtL workshop and execute on well site.
* Performance auditing on well site.
* Experience in CSG design and its relations to kick volume & swapping.
* Run and cementing all casing sizes.
* Drilled wells with Directional assy., including Turbines and Mud Motor PDM's& power drive.
* Wellheads design and requirements to comply with wells CSG Scheme.
* Daily Monitor drilling operations and prepare the final well reports
* Monitoring the Drilling tools efficiency such as Motors, MWD, bits, jars, down whole completion equip. etc.
* Control well cost daily and overall.
* Unloading wells for production.
* Issue the AFE.
* Bit record and bit selection for a fast ROP.
* Applied the new bit selection and Technologies.
* Write the EOWR (End of Well Report).
COMPANY: BAPETCO/SHELL –Egypt.
DATE: May 1998- March 2001.
Position: Night shift Drilling Supervisor.
* Drilling gas and oil wells (deep wells – vertical, slanted and horizontal), deep deviated wells, High temperature gas wells, Drilling of horizontal slim hole sidetracks.
* Daily Monitor drilling operations and prepare the final well reports
* Monitoring the Drilling tools efficiency such as Motors, MWD, bits, jars, down whole completion equip. etc.
* Control well cost daily and overall.
* Unloading wells for production.
* Issue the AFE.
* Bit record and bit selection for a fast ROP.
* Applied the new bit selection and Technologies.
* Write the EOWR (End of Well Report).
Additional Information
Current Certificates;
IWCF (supervisor level) expire April 2010, shell round -1, H2S expire February 2012.
INDUSTRY TRAINING
* 2009 Attended PTW course at training center KPO b.v. Karachaganak-Kazakhstan.
* 2009 Attended BBS course at SaiPar KPO b.v. Karachaganak- Kazakhstan.
* 2009 Attended SKA course at KPO b.v. training center Karachaganak- Kazakhstan.
* 2009 Attended H2S, Health, Safety and Environment course at training center KPO b.v. Karachaganak- Kazakhstan.
* 2008 IWCF (supervisor level) at randy smith training center Cairo - Egypt.
* 2007 Attended H2S, Health, Safety and Environment course at Aramco- Saudi.
* 2005 Attended shell (Round -2) examination at shell Learning Center in Holland on 3-4-octobar-2005.
* 2005 IWCF (supervisor level) From Egyptian drilling Company Cairo-Egypt.
* 2005 Had Drilling optimization course in Alamal international center Cairo - Egypt.
* 2005 Attend Advanced under balanced well operations. & pressure control Course at Egyptian drilling Company Training center Cairo - Egypt.
* 2005 Attended Deep Water Course at petroleum Complex Learning center in Alex.-Egypt.
* 2003 Had IWCF (supervisor level) at randy smith training center Cairo - Egypt.
* 2002 Attend Shell P-130 course (basic well engineering – 28 days at Shell learning center in Holland).
* 2002 Attended shell (Round -1) examination at shell Learning Center in Holland.
* 2001 Had IWCF (supervisor level) at randy smith training center. Cairo- Egypt.
* 2000 Had DIMS system administration and power user course in Landmark Cairo- Egypt.
* 2000 Had stuck pipe course at Egyptian drilling Company.
* 1999 Had Bapetco defensive driving course Cairo-Egypt.
* 1999 Had Drilling equipment and well control basic course at Egyptian Drilling Company.
* 1998 Had H2S, Health, Safety and Environment course at Egyptian Drilling Company.
* 1998 Had Technical English and report writing course.
* 1998 Had Intensive and diversified practical drilling training, starting at Roustabout Level, ending at assistant driller level.
* 1998 Had Practical training on surface production and storage of oil.

MEMBER SHIP.
* Society of petroleum engineers SPE.
* Egyptian Engineering Syndicate.
* BAPETCO Company Syndicate.

References:

* References available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 7055)

Go to Search Parameters...

Brief Description

Experience in commissioning 5MW wartsila diesel engines, underwater mountable Thrusters, marine systems, meeting with owner and class surveyor, technical management of ships, operation and maintenance of marine systems

An Instrument & Electrical Inspector/Supervisor with 15 years of extensive experience in the field of Inspection, Engineering, Construction, Hook-up, Commissioning and Certification of various kinds of Plants such as Petrochemical Plant, Desalination Power Plant, Sewage Water Treatment Plant, Oil &

I am a graduate Mechanical Engineer with over 20 years Oil & Gas Refining industry experience, out of which about 10 years at a AMOCO fuels and lube refinery at India. I am currently working as the Mechanical Design Engineer for a prestigious mega refinery project (world¡¦s largest grassroots refine

senior geologist

A qualified engineer with over 16 years of experience in production

"Rotating Equipment Engineering Specialist" with 17 years experience in refinery, gas plants, LNG plants and petrochemical plants for rotating equipment maintenance support, diagnostics, troubleshooting, reliability improvement and repair.

EM/MWD/LWD Gamma

I was assigned as Production Technologist for PETRONAS. My assignment mainly in Field Development Project whereby my job scopes are focusing on well &tubing design i.e. well completion design, artificial lift screening/selection & design, Sand prediction & sand control selection,

I am Expert on Reservoir Engineer, my capabiliity can cover whole petroleum engineering

Over ten years of experience in the design, troubleshooting, maintenance and optimisation of new and existing facilities including sweet and sour natural gas plants, oil batteries, water injection, water treatment and chemical plants.

This letter is to express my interest for a Senior position in oil & gas Exploration. Based on my skills in Geology and oil and gas Exploration and New Ventures, Experienced Geoscientist, Explorationist and new ventures activities; PhD graduated In Geology (1991), bachelor (structural geology).

Electrician - Canadian journeymen , Instrument Technician - Canadian certification,10 years Supervisory, Startup and commissioning expert. Offshore FPU FSO. PLC Expert/ DCS, Experenced Trainer. High Voltage, protection relay testing, Valve repair, Work exp. in Canada, Libya. Indonesia.

I have over 32 years in the Coatings industry, 22 years as a Coatings Inspector (British Gas/CSWIP BG57012), with 14 years as a Coatings Advisor to ExxonMobil Nigeria. My duties For Exxonmobile included Inspection of all onshore and offshore facilities also new construction projects. Other duties in

Senior Piping Designer

25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.

QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years

Electrical Design, Drafting, Construction and Procurement

Autocad, microstation, frameworks 2-d and 3-d cad structural designer

Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.

Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.

A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Sr. Civil Structural Designer

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Able to make piping design from conceptual to detail design and field engineering work( see career summary on my resume)

CATIA V5 (1600 Hours), Kaizen/Kanban - Continuous Production Improvement, Lean Manufacturing/Six Sigma, Microsoft Office Systems

QA/QC Engineer-International projects-Oil&gas industry

I have 14.5 years of experience in the field of instrumentation/control system engineering for Oil/Gas industry. I have served with Reliance Industries Limited (A Indian largest Oil/Gas/Petrochemical Company ) & and SABIC (A Saudi Arabia largest Oil/Gas/Petrochemical Company).

More than 15 years of comprehensive knowledge and experience in the field of electrical and instrumentation engineering. Over 12 years of involvement in inspection and construction of Oil & Gas, Petrochemical, and Utilities Plants. Have good knowledge in implementation of SHELL DEP (Design and Engin

Analyst/Technical Assistance for reservoir/production operations

Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies, Integrated Production Systems Modeling, Well Optimization Production Engineering and Hydrocarbon Accounting. Proven record of accomplishments in deepwater production operations in the U.S. and West Africa

Electrical Engineer

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada

Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS

Under Ground Piping Specialist

Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out