Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #87996 next resume »»
CONTACT INFORMATION:
View contact information...

Date of birth: 27th Nov.1962
Nationality: Libyan
Marital status: Married with two children

Personnel profile:
16 years experience in, horizontal and vertical drilling supervision for Exploration & Development wells. experience in under balanced drilling using jointed pipe, well completion, workover, drilling engineering & petroleum engineering hands on experience, with Waha Oil Company (Oasis), in different five oil fields, wells were naturally flowing as well as pumping (electrical submersible pump, water injection), hired by consultant company as drilling company man for UBD technique at Gulf Oil Company ( AGOCO ). Worked with WBGLibya, Service Oil Company as a drilling Department Manager.

Educational Qualification:
B.Sc.degree in Petroleum Engineering from Brega University of Technology - Libya, Dec 1989.

Work history:
(Feb. 1997-Present) Drilling & workover Supervisor: Defa, Waha, and Samah fields – Waha Oil Company (Oasis). AGOCO (BP) as drilling company man.
Responsibilities and duties:
* Supervise both Exploration and Development wells.
* Review and agreed drilling & workover plan with main contractors, also supervised execution of the agreed plan and solve any problems related.
* Ensure compliance with safety standard and regulation during drilling & workover operations
* Supervise eight workover rigs and four drilling rigs through Waha Drilling Office.
* Supervise minor workover operations (ESP change out).
* Supervise major workover operations: cementing, acidizing, fishing, tieback, logging and perforation.
* Supervise all wire line & slick line operations.
* Initial completion operations & workover of development wells.
* Interpretation of Cement Evaluation logs
* Swabbing operations and analysis.
* Completion & workover brines
* Plug back jobs
* Conversion to observation wells
* Coil tubing operations.
* TCP jobs
* Horizontal well completions and workover.
Duties also involved interacting with contractors (Schl, Hall, Baker Hughes
Challenger, KCA, REDA, Centrlift, Jowfe, ADWOC, NWD, and Weatherford).
In mean time work as contractor with Service Company as drilling supervisor for operator Oil Company (AGOCO) on drilling rigs (24 hrs).

(Feb1993-Apr1997) Senior petroleum engineer, Waha Field (OASIS)
Responsibilities & duties:
* Supervise production well testing..
* Witness (logging, perfs, acid.) jobs.
* Initial completion operation of development wells.
* Optimize daily oil field production rate.
* Zone isolations
* Selective swabbing
* TCP jobs.
* Coiled tubing
* Responsibilities: Optimize daily oil field production rate, & ESP design, supervise production well testing, witness well completions, & workover.

Other skills:
* Water Well Drilling (shallow & deep).
* Well stimulation.
* Scale Inhibitor Squeeze treatment.
* Mixing Gung Plug for curing Loss Circulation Zone.
* Jointed Pipe Design for UBD technique.
* Air Drilling.
* Wells Activation by Coiled Tubing Technique.
* Production monitoring during DST testing.
* Wells Swabbing.
* Balanced Cement Plug
* Cased & open hole logging.
* Fishing jobs.
* Tie back jobs.
* Wire line operation.
* Down hole completions equipments
* Operation supervisions.
* Field Superintendent.

EDUCATION & PROFESSIONAL DEVELOPMENT:
Course, year, place, period.
1. Horizontal Drilling Technology, Aug.2004, Calgary Canada. 4 weeks
2. Drilling and Production Planning, Aberdeen, U.K, August 2000, 28 weeks
3. Well Planning, RGIT Montrose, Aberdeen, UK,
4. Drilling technology, Montrose, Aberdeen, UK
5. Reservoir Evaluation, Aberdeen Collage, UK
6. Well completion, Montrose, Aberdeen, UK. Feb. 2001
7. Well intervention, Montrose, Aberdeen, UK. Feb. 2001
8. IWCF Drilling Supervisor Well Control, DTL Down Hole Technology Aberdeen, U.K
9. IWCF Workover Well Control, Montrose, Aberdeen, UK
10, Associated Principles & Procedures, DTL Down Hole Technology Aberdeen, U.K
11. IWCF drilling supervisor, 2 weeks, Caledonia Training & Consultancy, May 1999
12.Effective Communication skills & Supervision. Waha Oil Co. 2 weeks
13. Open hole log interpretation Schlumberger, 1997, Tripoli/Libya, 1 week.
14. Work shop for CDM Feasibility study, Nippon Oil Corporation, Tokyo, Japan, Aug.2008
15. Global Environment Issues study for CDM Project. Nippon Oil Explration,Tokyo.Aug.2008

COMPUTER SKILLS

MS Office: Windows 98 and XP; MS Word, MS Excel, MS PowerPoint, MS Outlook;

* Languages (Arabic & English)

View contact information...
«« previous resume next resume »»
Search Results (Resumes 351 to 400 of 7040)Go to Search Parameters...
Brief Description
Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455
Inspection/Welding Engineer
20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore
B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.
21 years in oil and gas industry in field operations
Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.
Project Engineer
civil inspector, site manager, civil engineer
DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.
Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .
Mechanical Engineer/Supervisor(rotating machinery)
Extensive experience of combined domestic and international on well logging industry
Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.
Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.
Process Engineering Opportunity
Dynamic Positioning Control System Specialist
More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.
Sr Subsea Controls Consultant
A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process
Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.
I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.
Pipe stress engineer
Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.
Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.
Duties & Responsibilities in different Oil & Gas Operator Companies :
16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con
Inspection in the field of Electrical & Instrumentation Works
Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff
Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience
PDMS Piping/Mechanical Designer
20+ Years piping designer
Working for Petrofac International as Commissioning Engineer
Senior process engineer
Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills
I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx
A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.
Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages
Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.
15+ years of experience
Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.
ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION
Petroleum engineering professional with diversified domestic USA and international experience in E&P
Senior Instrument , Electrical, Rotation, Engineer, Project Management
Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.
An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .
Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design
Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen
19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years
PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office
I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,
First   1   2   3   4   5   6   7   [ 8 ]   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com