Resume - Mechanical Engineering graduate with experience in EPC

Misco Jobs

Resume #88065

CONTACT INFORMATION:
View contact information...

Objective:
To be a part of growing team in the Oil and Gas sector where my skills and experience can be better utilized and explored for a mutual benefit.
Synopsis:
Mechanical Engineering Graduate with experience in the field of purchase of EPC items required for total facilities management in the Oil and Gas Industry.

Working Experience
Organization: National Oil well Varco, Jebel Ali Free zone Mar 2007 to Date
Oil & Gas Industry – fabrication/manufacturing/Servicing
Designation: Procurement Supervisor
Reports to: General Manager
Procurement done to the tune of approx USD 10m per month
Direct Reports-3
Job Description:
* Receives MR and float enquiries across to all the company approved vendors
* Bid receiving and bid tabulating for analysis and report making
* Recommendations made according to the report for the management
* Technical clarification handled
* Liaise with Engineering dept for further technical substitution and with QC dept to sought out engineering related issues before making the purchase order
* Chasing vendors for expediting the deliveries
* Monitor Compliance to purchase order or contractual agreements

Buying Experience as follows:
* Material such as Plates (Grades SS 316/304, Duplex and CS),API grade steel
* pipes and fittings, structural steel, valves, flanges, adaptor spools
* E&I items such as control panel, pumps, motors, transformers, cables, lighting system
* Equipments such as storage tanks, tool baskets, offshore baskets, Porto-cabin, cranes, man lifts
* Instrumentation items like pressure gauges, control system

Expediting Experience:
* Report generation of expediting list in relation to the out standing orders
* Chasing vendors in order to get the dates expedited to meet deliveries to customers
* Vendor visits in order to educate and understand as well as expedite certain critical orders in order to ensure the work done to meet the scheduled delivery period
* Report on current status of the expedite orders and some times liaise with sales dept to resolve certain un expected issues

Skills:
* Very good at Excel spread sheet in tabulating, analysis, graphs, linking sheets for calculations, formula for calculating etc.
* Excellent MS office and email
* Worked in ERP – JD Edwards for the last 4 years and mastered the purchasing module as well as good at report generation.
* Average working experience for AutoCAD
* Modeling experience and would use this tool for communicating with the vendor sometimes as well as engineering resolutions
* Very good at Power point presentation

Company: WEATHERFORD OIL TOOL ME LTD. Feb 2003-2007
Oil & Gas industry – Fabrication/oil tools Manufacture/Servicing
Designation: PROCUREMENT ENGINEER
Reports to Sr. Engineer

Job Description:

* MRP report generation
* Participate in the review of MRP for make or buy decisions along with the other departments heads
* Float enquires for all buy items
* Receives bids and analyze for further actions like meeting delivery dates and price etc.
* Tabulate and report for further actions and await for confirmation from the manager
* Negotiate with the vendor for better pricing and delivery dates if required
* Cut PO for all the approved bids and inform the vendors accordingly and advice the vendors for strict delivery.
* Liaise with Engineering dept for resolving technical issues

Items purchased
* Raw material Steel bars for making down hole tools and rotary equipments
* Structural steel and various plates for all fabrication orders like tanks, baskets, cabins,
* Hardfacing and protective coating from qualified vendors
* Casing Pipes, scheduled pipes, seamless tubes, drill collars
* Flanges and ring gaskets
* Seals and O Rings and other hydraulic related spares
* Equipments like welding machine,generator,crane,compressor,
* Mechanical testing and Metallurgical analysis from qualified vendors
* Qualifying the vendor with approved third party involvement for critical operations like welding and fabrication
Strength:
Good communication skill
Very good at email and internet for any enquiries that needs light
Good interpersonal skill

Company: SULFO RWANDA INDUSTRIES-AFRICA 1995 -2000
FMCG Company producing consumable products
Designation: PRODUCTION/PROCUREMENT ENGINEER
REPORTS TO: FACTORY MANAGER

* In charge of procurement of raw material, machineries, chemicals, oil, spares and tools in order to run the production o Edible oil in tones o Chemicals for the production o Paper jumbo for carton making o Machineries and spares for maintaining the machineries as per MR from maintenance dept o Plastic raw material virgin plastic granules, and pets for making pet bottle and containers o
* Complete responsibility to execute the production plans as per schedule in order to meet the deliveries
* Continuously monitor and optimize utilization of materials and human capital by strict adherence to operation standards.
* Implement productivity improvement and cost reduction initiatives to assist in market competitiveness and product reliability.

Company: HEAVY ENGINEERING CORPORATION 1994-1995
Designation: PROCESS PLANNING ENGINEER RANCHI, INDIA
For foundry forge plant FFP.
Industry: Heavy Equipments manufacturing
Patten tank parts, over head cranes, steel plant equipments

Job Description
* Responsible for generating the BOM and make MR for the shop floor to supply to the purchase personnel
* To spec out the technical requirement for each raw material or components for the purchase dept to carry out enquiries to engineering specification
* To generate and pass the complete procedure and specs for the purchase dept to follow up with the enquiries
* Close coordination with purchase dept to ensure the MR is converted to order and to ensure the deliveries of these are done to satisfy the shop floor production
* Follow up with the out standing MRs for timely conversion of the PO and meet delivery.
* Route sheet generation for the shop floor to follow exactly in order to get the job done
* Route sheet list out the tooling and additional components to complete the assembly

Skills:
Good interpersonal skill
Strength:
Adaptive
Flexible
Learning attitude

ACADEMIC AND PROFESSIONAL QUALIFICATIONS

Bachelor of Technology (Mechanical Engineering) -1992 First Division
Govt. College of Engineering, Kannur, India

Master of Engineering (Production/Industrial) -1994 First Division
College of Engineering Guindy, Madras,India
Anna University

PERSONAL PROFILE
Nationality: Indian
Date of Birth: 21-5-1968
Visa Status: Residence
Languages: English / Hindi / Malayalam
Driving License: DUBAI RTA ISSUED LICENSE #3
Married: Married

Hobby: listening to Music and travel
Special strength to involve in helping others for the better tomorrow

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 6983)

Go to Search Parameters...

Brief Description

Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.

24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.

Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies

I am a professional process engineer with over 15 years experience

Free! Health, Safety & Environment Manager - Crane Inspector - OHSAS 18000 Lead Auditor - Senior Trainer - HSE Master Degree

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

More than 28 years of experience in oil industry

22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities

Experienced Completing and Producing Petroleum Engineer

Quality control,Quality Assurance,Inspection,Project Engineering,Surveillance coordinator

ASNT LEVEL 3 /WELDING PAINTING LIFTING I NSPECTOR

Enquiry specs for compressors, turbines, pump, blowers etc. , technical evaluation of bids, preparation of technical recommendations, checking & approval of vendor documents., interface with other disciplines, knowledge of API standards

17 years experience in EPC environment, on oil refineries and petrochemical projects

INSTRUMENT FIELD ENGINEER

Senior Corrosion Engineer with 14 years experience at metallurgy fields especialy corrosion & corrosion control. expert at painting, insulations,cathodic protection, materials selection, corrosion inhibitors, corrosion monitoring, coatings inspection . I am serious at work.

As a well sit geologist for six years, including one year for Coal Bed Methane, familiar with StripLog, SDL_9000 geological logging software, strong organization ability

Electric Engineer with MSEE with more than 15 years of work experience in oil and energy industry, occupying positions in electric maintenance, utilities plants operation and project engineering management and construction,

I am a postgraduate in civil engineering from the prestigious Indian Institute of Science, Bangalore. My major experience is in Oil industry. I have vast experience in Contracts Management in India & abroad.

Estimation of Oil and Gas EPIC Projects

Senior Electrical Engineer currently working For SonaHess Company (association Sonatrach & Amerada Hess), El gassi Hassi Messaoud.

• 12 years of experience in geology, geophysics and reservoir engineering, drilling operations (including horizontal, ubd, rotating BOP etc)

Mechanical Engineering graduate with experience in EPC - procurement manager

Experienced in sweet and sour, oil and gas projects. Execute projects on time and on budget while working as a team player. Solutions oriented with an eye toward bottom-line results. Organized multiple projects concurrently, with successful results in a fast paced environment. Effective communicat

Instrumentation Engineer

I'm Technical Degree in Geology (Associate Degree in Geology) and I'm looking for a job as Mud Engineer Worldwide.

In addition to my graduate engineering degree and more than 15 year of experience in power generation and chemical plants. I have currenly done my MS in Total Quality management.

Senior rotating equipment with 12 years experience with sound knowledge of project engineering and project management

B. Tech. (Electrical Engg.) from Rajasthan Vidyapeth (Deemed) University, Udaipur.

KEY COMPETENCIES

A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company

Graduate in Mechanical Engineering having 15+years in Static Equipments & Packages Design & detail engg. engaged in Design & detailed engg. of pressure vessels, Columns for Oil & gas Applications and all other types of static equipments & packages, I have a good exposure in EPCM

Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

I am very talented and a hard worker. I have a good eye for any type of construction.

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

PDS Frameworks, Autocad, Microstation

Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer

Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out