Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #88134 next resume »»
CONTACT INFORMATION:
If you don"t see contact information, please log in first.

INTRODUCTION
I bring with me about 17-years of diverse oil and gas experience, which includes operator and service company profile. During my career exposure, I gained vast technical and management experience in completion design, production technology, sand control, completion programming and supervision, marketing, technology coordination, new technology implementation, operations management of well services activity covering well perforating, testing, slickline, artificial lift with sandface and upper completions, country management of completions activity, profit and loss statement review, balance sheet and cash flow management, contracts negotiation and tendering, and change management. In addition, I have worked as a Completions Engineer for renowned oil operators, such as Eni-Agip & BG Group. For Eni-Agip, I performed a classic field-wide completions design and modeling in Venezuela which covered a wide range of sandface completions such as; Open Hole Gravel Pack, Frac-Pack, High Rate Waterpack, Single trip Multi-zone gravel packs using Alternate Path technology, Single trip perforate & pack technology and multilateral completions. All these various completion configurations and designs were successfully installed and played a key role in increasing the operator's production levels two-fold within a period of two years. In 2000, I co-published an SPE paper #58776 titled "A Multi-Zone Single-Trip Gravel Packing and Production Technique Reduces Completion Costs by 60% Compared to Conventional Water-Packing in a Single-Selective Completion in the Gulf of Mexico", based on a novel technique for performing the "Frac-Pack" and installing the production tubing at the same time thereby bringing production ahead of schedule while reducing conventional costs. Worked as Lead Technical Engineer in my last Schlumberger role in charge of Sand Control Completions Technology in the entire Africa continent, where my vast experience in Open Hole Gravel Pack came into effect in supporting the major deepwater subsea projects in Africa and I also toured the various countries in Africa ensuring all Sand Control Fluids & Proppant utilized in Gravel Pack & Frac-Pack completions are prepared & QA-QC checked as per API standards & guidelines with complete QC File & documentation provided for the clients. In 2001, I coordinated and supervised, from the service company standpoint, the first phase of the BG Group NCMA project in Trinidad, which involved the deployment of up to 4 new technologies in the completion of extended reach horizontal high rate gas wells. This work merited my receipt, on behalf of the project team, of the coveted yearly BG Group Chairman's Award for Innovation & Excellence for the year 2002 in London. In 2008, I worked for BG Group as Completions & Well Test Engineer performing the role of Completions and Well Test Consultant assigned to OPL 286 Deepwater Well Test Campaign.

PERSONAL DETAILS
Date of Birth 16 August 1969
Experience 17 Years

EDUCATIONAL QUALIFICATIONS
B Sc. Chemical Engineering (1st Class Hons), Obafemi Awolowo University Nigeria 1990/91

WORK EXPERIENCE / CAREER ACHIEVEMENT

2009 June-Present, TECHDAER /Port-Harcourt Nigeria
Completions Engineer / Supervisor / Consultant / Technical Director
- Working as Senior Consultant/Completions Engineer/Supervisor for E&P companies
- Consultant that prepared the Completion and Well Test Design for Waltersmith Petroman Oil Ltd., for its Ibigwe-#5 Well in the Deltas of Nigeria.
- Conduct Drill Well on Paper (DWOP) exercises.
- Write completion and testing program.
- Supervise Completion activities at the rig/wellsite offshore/onshore
- Perform QA/QC on selected vendor's equipment.

2008 May-2009 May, BG GROUP /Lagos Nigeria
Completions & Well Test Engineer
- Responsible for "Well Completion and Testing" operations in deepwater exploration campaign;
- Design sandface completion for BG Nigerian exploration assets.
- Select and verify tools and equipment for casing and riser cleaning, TCP, gravel pack - HRWP/frac pack, DST, bottom hole sampling, PLT, surface well testing.
- Develop QCP & perform QA/QC on selected vendor's equipment.
- Review & evaluation of Technical & Commercial Tenders from vendors for MODU & Sand Control packages.
- Conduct various completion engineering design using Wellcat, TDAS, SPAN, etc
- Conduct Test Well on Paper (TWOP) exercise including HAZOP reviews.
- Write completion and testing program.
- Supervise equipment preparation onshore
- Supervise job execution offshore, etc.

2007 Nov -2008 Apr, SHELL Petroleum Development Company (SPDC Warri Nigeria)
Completions & Well Test Consultant
- Responsible for "Well Completion" operations in land appraisal "ad-hoc" campaign;
- Responsible for the design & execution of completion & Well Test for 2 wells (1 gravel packed & 1 stimulated) for SHELL Petroleum Development Company Nig Ltd., in Land locations off the Niger-Delta Warri area, Nigeria.

2005 Nov-2007 July, Schlumberger, Angola/Houston
Lead Completion Engineer West & South Africa
- Regional Lead Technical Engineer for Sand Control covering 8 countries; Angola, South Africa, Gabon, Congo, Ivory Coast, Eq Guinea, Chad & Cameroun
- Responsible for all West & South Africa client support. Design, plan & evaluate GP Tools and fluids.
- Training & Development of Field Engineers & Technical Engineers in Sandface Completions
- Coordinating & managing Cased Hole/Open Hole Sand Control & Gravel Pack projects & operations.
- Troubleshooting and risk assessing sand control subsea completions in West & South Africa Region.
- Ensuring Service delivery & Quality control in completions is maintained within Region
- Ensuring all Sand Control Fluids & Proppant utilized in Gravel Pack completions are prepared and QA-QC as per API RP58 with complete QC File & documentation provided for the Operators where Schlumberger works

2004 Oct-2005 Nov Schlumberger, Houston
Global Business Champion (Sand Control Tools & Fluids)
- Analyzed the global sand control market, ascertained Schlumberger position in this market, and prepared a 5-year business plan to position Schlumberger for eventual growth & leadership in Sand Control and Completions $2B market. This plan received company President review and approval. Commenced strategy deployment by the second quarter of 2005
- Subsequently performed Sandface Completion Design Support for projects worldwide covering Open Hole Gravel Pack placement & PERFPAC Completions. Examples of projects supported were; Azerbaijan Open Hole Gravel Pack Completions for BP in Baku, High Rate Waterpack Completions for Perenco Projects in Gabon.
- Top management marketing presentations in Houston, Dallas, New Orleans & 3 African countries for clients.
- In addition, I developed the 6-month "fast-track" cross-training program for developing Schlumberger & Operators' Engineers into Sandface Completion Engineers. The first candidates from BP graduated in 2005, and two more sessions are scheduled for 2006.

2003 Feb-2004 Oct Schlumberger, Nigeria
Country Operations Manager / Managing Director
- Managed the entire Nigeria Operations for the Well Completions & Productivity (WCP) segment covering, Well Testing, Subsea, Slickline, Sand Control & Completions, Smart Wells and Artificial Lift in Lagos, Port-Harcourt & Warri.
- Responsible for over 300 people & $100 Million Business.
- Served on the Schlumberger Board of Directors in Nigeria as Chairman & Managing Director of Camco Nigeria Limited while functioning as Managing Director for Schlumberger Testing & Production Services Nigeria Limited.
- I was the focal person overseeing the deployment of Esso's ERHA Deepwater Gravel Pack Completions Project which required the use of the Stimulation Vessel for the first time in deep offshore Nigeria, in addition to other innovative completion systems such as 10Ksi GP Packer & FIV combo deployed for the first time in this region. This startup and 1st phase of this project was successfully deployed prior to my transfer out of Nigeria. This project is presently in its second deployment phase, and continues to be run successfully today.
- Good negotiator. Negotiated and obtained an amendment to existing contract from Esso Nigeria covering the price increases for additional quality certifications of equipment & processes, and change in scope of work.
- Negotiated and obtained a Memorandum of Understanding, followed with a Contract, from Agip Nigeria on the implementation and deployment of Electrical Submersible Pumps in its Ebocha field.
- Worked with the management board as a team on the initiative to increase Nigerian Local Content utilization which, received commendations from the governing bodies.

2001 Sept-2003 Feb Schlumberger, Trinidad
Country Operations Manager
- Managed the entire Trinidad & Tobago Operations for WCP segment covering, Well Testing, Gas Lift, Slickline, Sand Control & Completions in San-Fernando, Galeota & Port Of Spain.
- Responsible for over 80 people & $40 Million Business.
- Project manager for the planning & technical execution of British Gas NCMA Open Hole Gravel Pack Project. This was the 1st project worldwide where Schlumberger provided 100% of all the completion design, fluids, tools, & accessories. The innovative tools deployed for the first time on this project included the Anti Swab Service Tool, MudSOLV Tool, and Slickline deployable FIV shifting tool for contingency, Non-Intervention Set Packer. This project merited the coveted BG Chairman's Award for Innovation & Excellence for the year 2002.
- Technically supporting key Sandface Completions for BP in Trinidad for the Mahogany, Amherstia & Immortelle field work, especially when PERFPAC* - Schlumberger's single trip perforate & pack technology was utilized.
- Performed the dual role of Technical Leader for the Complex Completions Steering Committee created in 2002 to peer review the typical complex completions such as Multilateral, PERFPAC*, & Multizones, performed in the Venezuela & Trinidad region.
- Negotiated and obtained an amendment to existing contract with BP with regards to the provision of 2 DESC Engineers in BP Port-Of-Spain office. Schlumberger's DESC Engineers are Engineers that perform Design & Evaluation Services for Clients. The DESC is typically a Technical Engineer who is seconded to the Operator to perform the role of a Completions Engineer in the Operator's office. Typically Schlumberger remains remuneration for this service.
- Coordinated the 1st Surface Well Test in Trinidad for EOG. This was Schlumberger's 1st well test operation in over 4 years and required extreme planning & coordination to deploy the equipment & people required to perform this operation. The well test was successfully performed.

2000 Aug-2001 Sept Schlumberger Well Services, Venezuela, Maturin
Services Manager
- Managed the Well Production Services (WPS) in Well Services (former Dowell Schlumberger) for Eastern Venezuela covering Sand Control Pumping, Fracturing & Matrix Acidizing.
- Was responsible for over 100 people & $30M business.
- I am particularly proud of the achievement of negotiating a Memorandum of Understanding, followed with a Contract, with PDVSA spanning a work scope of gravel pack pumping services in Morichal field for 3 years, this being Schlumberger's 1st Sand Control assignation from PDVSA in over 8 years.
- Forged a strategic relationship with major clients while ensuring synergy with competitors for common goals.
- Trained and mentored Field Engineers on Sand Control operations.
- Conducted wellsite visits to audit the operations and ensure all QHSE standards & processed were being implemented.

2000 Jan-2000 Aug ENI-AGIP, Venezuela, San-Tome
DESC Engineer (Seconded to ENI-AGIP & Schlumberger LASMO Alliance)
- Completions Engineer, aka Design Evaluation Services for Client whose job function is the design and evaluation of sand control completions for ENI-AGIP, ensuring that jobs are designed & executed in accordance with stipulated Schlumberger/ENI-AGIP operating procedures, best practices and safety policies.Situated in ENI-AGIP office in San Tome
- Performed a field-wide completions design which covered sandface completions such as; Open Hole Gravel Pack, Frac-Pack, High Rate Waterpack, Single trip Multi-zone gravel packs using Alternate Path technology, Single trip perforate & pack technology PERFPAC* and multilateral completions. All these various completion configurations and designs were successfully installed and played a key role in increasing the operator's production levels two-fold within a period of two years
- Reviewed Agip production database for Dacion field and made Production Optimization recommendations.
- Initiated idea for infield produced water reinjection. Water production was ENI-AGIP's major challenge to the Dacion field development.
- Supervised rig & rigless Well Test, Completions & Workover operations during completions in San Tome as wellsite PE.

1997 Aug-2000 Jan Schlumberger, Gulf of Mexico Region
Various Technical & Management Roles in the United States
- Training & Development Coordinator; Jan 2000 to May 2000;
Coordinating & Managing training / coaching of Field Engineers & Service Supervisors in Dowell Schlumberger Tool Services. Coordinating and prioritizing projects for optimum business growth for Gulf Coast Sand Control Tool Services. Based in Maurice, Louisiana, USA
- Field Service Manager(FSM) – PERFPAC Services; Aug 1999 to Jan 2000
Managed the PERFPAC & Special Completion Services in the Gulf of Mexico.
Focal point for liaison between the Dowell Schlumberger & Surface Testing FSMs to ensure Schlumberger was seen as "one company" by the client when we worked in the field.
Special completions performed included services such as PROPAC & Deep Water Completions. Based in Maurice, Louisiana, USA
- District Technical Engineer(DTE) – PERFPAC Services; Aug 1998 to Aug 1999
Lead Engineer for the PERFPAC Cell & Tool District.
Technical Support Engineer primarily for Well Production Services (Tools, Fluids & Matrix Acidizing)
Performed job designs for oil & gas wells candidate selection for sand control completions.
PERFPAC* Champion & Technical expertise for PERFPAC* Completions, Schlumberger's Single Trip Perforate & Gravel Pack Services.
Assisted the FSM in preparing the business & sales plans. Based in Maurice, Louisiana, USA
- Sand Control Specialist ;Feb 1998 to Aug 1998
Sand Control Specialist in charge of technical support services (Tools, Pumping & Fluids) for Latin America (Trinidad & Brazil) & West Africa Operations. Based in Lafayette, Louisiana USA
Performed Technical Bids for the Sand Control districts that did not have the expertise in-house, such as Brazil (Albacora Leste Bid), Chad (Esso Tender), Trinidad (BP Amherstia), etc.
Visited locations that needed to startup Sand Control and set-up a Sand Control shop. An example was the Sand Control Trinidad Shop in Galeota which I set-up during my visit in February 1998.
- Training Instructor; Aug 1997 to Feb 1998
Technical and Operational instructor.
Responsible for structuring & teaching the Sand Control course contents to reflect current Technology at the time. Responsible for structuring & teaching the Sand Control course contents to meet the Technical & Operational Training needs of the Field. Based in Kellyville, Oklahoma USA.

1993-1997 Dowell Schlumberger, Nigeria
Various Technical Roles in Nigeria
- Engineer-In-Charge; Mar 1997 to Aug 1997;
WPS Sand Control Tools & Completions Engineer-in-charge of operations for Sand Control & Cementing.
Responsible for field personnel & equipment utilization and cell budget. Based in Port-Harcourt, Nigeria
- Cell Leader; Nov 1996 to Mar 1997;
Cell Leader for Sand Control Tools & Pumping (& STIMPAC) Services.
Worked on the first FRAC-PACK treatment in Nigeria performed for Chevron in Meren field. Based in Warri, Nigeria
- Field Engineer (Sand Control Services); 1995 to 1996;
Field Engineer performing wellsite jobs (offshore, land & swamp) for Sand Control Tools & Pumping Services. Based in Port-Harcourt, Nigeria
- Field Engineer (Cementing Services); 1994;
Field Engineer performing wellsite jobs (offshore) for Cementation of Oil & Gas Well Services. Based in Port-Harcourt, Nigeria
Started cross-training in Sand Control fluids due to lower activity in cementing services at the time.
- Field Engineer Trainee (Cementing Services); 1993;
Training & developing skills for performing wellsite cementing services. Based in Port-Harcourt, Nigeria

1992-1993 Obafemi Awolowo University, Nigeria
Project Assistant, Chemical Eng. Dept (NYSC)
- Spent the 1-Yr mandatory paramilitary service (National Youth Service Course) at the Obafemi Awolowo University, Ile-Ife, Nigeria.
- Lectured & Worked with Senior Lecturer (PhD) on Oil Well Sensitivity Analysis Projects

AWARDS & CONTRIBUTIONS
- CO-AUTHER SPE #58776: "A Multi-Zone Single-Trip Gravel Packing and Production Technique Reduces Completion Costs by 60% Compared to Conventional Water-Packing in a Single-Selective Completion in the Gulf of Mexico" L.F. Rivas (Chevron U.S.A.), C.E. Zeiler (Schlumberger), B. Graff (Chevron U.S.A.), E. Ogbunuju (Schlumberger) and M. Parlar (Schlumberger)
- AUTHOR: "Selection of Completion Techniques in Horizontal Open Hole Completions for ENI-LASMO Group: Dacion Field Case Study in Venezuela." (LASMO 2001 Production Enhancement Forum)
- Recipient: 2002 British Gas Chairman's Award for Innovation in Technology: for the first worldwide use of a true Anti Swab System in Open Hole Gravel Pack completions for BG NCMA Trinidad project.
- Recipient: 2002 Performed By Schlumberger Silver Award: BG NCMA Trinidad project – Schlumberger's 1st sandface to surface integrated completion. Plus the deployment of 4 new technologies.
- Recipient: 2001 Performed By Schlumberger Silver Award: ENI-AGIP Dacion Field Production Enhancement Project – Schlumberger's deployment of the Iso-AllPAC technology among others in quickening and increasing oil recovery.
- Recipient: 2002 Performed By Schlumberger Thank You Letter: 1st DTS Real Time Data Acquisition across Sandface Completion in Trinidad
- Recipient: 1991 Obafemi Awolowo University Award for Best Performance in Chemical Engineering Laboratory.
- Recipient: 1988 SHELL Scholarship Award (Best Chemical Engineering Student, 2nd Level)
- Recipient: 1987 GULF OIL Scholarship Award (now CHEVRONTEXACO)

TECHNICAL COURSES & TRAINING
- 2009 IWCF Level 2 Well Control / Intervention Course, Aberdeen, UK
- 2008 Tropical BOSIET, Lagos Nigeria
- 2008 Emergency First Aid & CPR, Lagos Nigeria
- 2007 QHSE for Managers (Refresher), Jo'burg South Africa
- 2005, Product Champions Media Course, Houston, Texas, USA
- 2003, BP Advanced Safety Auditing Galeota, Trinidad
- 2002, New Emerging Technology in Completions, Houston, Texas, USA
- 2001, QHSE for Managers, Caracas, Venezuela
- 1999, Business/Finance Management, Texas, USA
- 1999, People Management, Texas, USA
- 1997, Technical Course (SCD, Tools & Completion Services), Louisiana, USA
- 1996, Design & Evaluation Course (UTC, Sand Control), England, UK
- 1995, Fire Fighting & Fire Prevention Safety Training, Shell, Port-Harcourt
- 1993, Field Engineer Course (UTC, Cementing), England, UK

PROFESSIONAL QUALIFICATIONS & AFFILIATIONS
- Society of Petroleum Engineers (SPE) Member #1882877

PERSONAL
- Proficient in the use of spreadsheeting and word-processing software for Windows such as Microsoft Word, Microsoft Excel.
- Proficient in the use of Microsoft Powerpoint in preparing professional presentation slides.
- Enjoy table-tennis, listening to music, and watching movies.
- Citizen of Nigeria.

- References available upon request.
«« previous resume next resume »»
Search Results (Resumes 2501 to 2550 of 7037)Go to Search Parameters...
Brief Description
A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait
I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management
Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.
Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.
15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.
Very Good Experience in Honeywell DCS,Safety Manager
Hplc Chemist,Responsible for Research & development of Analytical chemistry methods
Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.
A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.
Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.
Electrical Engineer
Detail Driven Engineer with an experience of 3 years. Diploma in Mechanical Engineering and a track record of success in consistent achievement of engineering project goals.
Well Test and C&WI services, i.e., Coiled tubing, acidizing, sand control, wireline, Fracturing, cementing, well testing, slickline, e-line, perforation programs, down hole plugs, x-mas tree change outs, and other.
Maintenance and Commissioning of Process control Instruments in Oil and gas Plant.Trouble shooting and faultfinding of ESD and DCS loops.Servicing and calibration of Control valves,pressure,flow,temperature,level control instruments.
2+ years of experience in Automation field. Currently working as Executive Engineer in M/s.Yokogawa India Limited
Analytical chemistry lab-skills for testing materials in quantitative and qualitative purpose with conventional or instrumentation techniques (UV-VIS, Atomic Absorbance and Infra Red Spectrophotometry, High Performance Liquid Chromatography, Gas Chromatography, Flamephotometry.
I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.
Bachelor in Engineering - Metallurgical Engineering.
BE in Mechanical Engr
Design Engineer-Static Equipments with 4 years Experience
Ensuring good quality control of mud system by analysis of drilling Mud additives
Have 10 years in cementing, tools and drill stem testing
MIET Polytechnic, Trichy, India Diploma in Mechanical Engineering, St.Joseph's Higher Secondary School, Trichy. Engineering Group
FEED, DFR, RFP, Detailed Engineering
GULF EXPERIENCE
Instruemnt engineer( PLC ,DCS ,ESD,field instruments )
My name is Adenowo Tosin Akeem, i hold a Bachelor of Science (B.Sc) degree in Earth Sciences(geology). Am interested in your reputable firm which i believe would need my experience. The following is a brief on my experience;
A highly motivated and experienced Construction and Structural Supervisor , with experience in oil and gas industry. An awareness and commitment to HSE implementation. Valuable team member, able to work on oBrief Description:* (Plwn initiative, with excellent man management and communication skills.
Experienced in Planning & Scheduling, Good knowlege of Primavera and MS-Project Software Operations, etc. HND in Mechanical Engineering
I have done post graduation in Geophysics with 1st class/A Grade. i have a year of seismic servicing industry experience working as an Assistant Geophysicist in one of the leading geophysical companies in Pakistan furthermore i have done 4 weeks internship in Prospect Generation Department of OGDCL
Drilling Fluids Engineer, Power Plant Engineer
A hard worker who can create mechnical design. Knowledgeable 3D design such as Autodesk Inventor and Solidworks and can give from the scartch design. Have designed various of automated machine such as test handles, coveyors, laser handlers, jigs and fixtures.
Mechanical engineer, autocad, offpipe, microsoft
Specialized in Corrosion & Materials Technology, Failure analysis, Quality control and Project Management
Electronics Engineer with 7.75 years of exp. in installation, testing, commissioning and troubleshooting of Satellite communication equipments and Vessel Traffic Management Systems which includes Radar Systems, AIS, VHF Systems, Hyd/ Met. Stations, etc
Flow Assurance Engineer
I am Graduated in M.Eng in Petroleum Reservoir Engineering from University of Calgary - Canada in 2006. I have more than two years of experiences in Research Institute of Petroleum Industry (RIPI), National Iranian Oil Company in reservoir simulation projects.
4 1/2 years oil & gas engineering experience (of which 3 years upstream) in conceptual, front end and detailed design.• Bachelor of Mechanical engineering, 2000-2004, from Visvesvaraya Technological University Karnataka, India with First Class.• Post Graduate Diploma in Petrochemical & Refining,
Procees Engineer With 5 Year of Exprience
Diploma Instrumentation, B. Tech Electronics(Appeared) , Skill in Automation Technologhy. Experties in Simens System, step7 , PCS7
I am seeking a Well Site Geologist/Mudlogging position with a quality, client service oriented company. I have worked in Environmental Consulting and Mudlogging/Well Site Geology. My oilfield experience is in Utah, primarily in the Uintah Basin, and also in Colorado, New Mexico, Wyoming, and Texas.
Instrumentation Design Engineer with 5 years experience in Petrolium,Oil&Gas,Fertilizer EPC projects. Knowledge of INtools,AutoCAD,Instrucal,PDMS,Flowel,conval. Knowledge of instrument specifications,loop drawings,JB schedule,INdex,I/O list,Technical Recommandations,Hookup,BOM,wiring
COMPUTER LITERATE MS Excel .MS Word. MS Power Point, (CMMS) Main Saver : JDE Edwards and Maximo & Electrical & Instrument Technician
B.Tech mechanical Mechanical Sr. Sales Executive in Leading MNC.
• Knowledge in Geochemistry, Geophysics, Well Logging, Oil Phase, Structure Drilling, and Direction Drilling and Economic Geology, mud operation ,oil gas analysis ,3D interpretation , Well testing operation.
Technical Sales manager - Electrical Engineering
Caterpillar field service engineer
Piping Designer, MicroStation, Power (Nuclear, Fossil, etc.), Petrochemical, Chemical, Heavy Industrial.
I am mechanical engineer having 17 years of experience in oil and gas construction industry both onshore and offshore. Currently located in Tunisia with petrofac for their onshore gas development project. I am well familiar in all standards and codes applicable for industry,
To participate in periodical inspection and testing of all static equipment of process plants and pipelines to analyse the condition of the equipment.
First   Prev   [ 51 ]   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com