Resume - Very Good Experience in Honeywell DCS,Safety Manager

Misco Jobs

Resume #88271

CONTACT INFORMATION:
View contact information...

Summary of Skills:

Project and System engineering of projects implementing the Honeywell Distributed Control System.

Experience in the various project implementation activities, including:

Supervision of system installation, plant commissioning and start-up.
Detailed engineering, design and system integration.
Detailed software engineering of the control logics.
Third Party Interface(OPC Configuration,Modbus Configuration)
Good knowledge in Process and Instrumentation Diagrams.
Able to read and implement logic diagrams.
Preparation of system configuration diagrams, BOM etc.
Safety PLCs like Honeywell FSC & Safety Manager.
E-Server Configuration & Implementation.
PHD (Plant Historian Data) Configuration, Implementation.

Professional Experience:

HONEYWELL AUTOMATION INDIA LIMITED, Global Engineering Services, Chennai, India, Working as Senior Engineer since July 2006 till date.

Job Responsibilities include:

DCS Project:

1. Honeywell's Experion PKS R210 DCS Engineering, Commissioning support For Grootveli Power plant (6x210MW) in South Africa (2007-2009).

System Hardware Engineering
Network Activities
Third party Interface(Alstom,Siemens to Honeywell DCS)
Development of Drive logics and validation
Application development for Boiler & Turbine system
HMI development for Boiler & Turbine system
Site Acceptance Test
ESD(Fail Safe Control System- Boiler Protection)
2. Honeywell's Experion PKS R310 DCS Engineering, Commissioning For Rosa Power Project (2x300MW) in Uttar Pradesh (2009).

System Hardware Engineering
Third party Interface
Application development for Boiler & Turbine system
Successfully Commissioned the System(DCS & ESD(Safety Manager))

3. Honeywell Experion PKS 300 DCS Engineering Shell GTL-Qatar (2008)

System Hardware Engineering
Preparation of Loop Schematic Drawings

4. Honeywell's Experion PKS R210 DCS Engineering, Commissioning & Site Support Qurayyah Power Plant (4x625MW)-Saudi Electricity Company in the Eastern provenance(2006-2008)

Safety Manager PKS Application development for Boiler Protection System
Application development for Boiler & Turbine system
HMI development for Boiler & Turbine system
System Hardware Engineering
Preparation of Bill of Material
Conducted Factory Acceptance Test for Unit-03 & Unit-04 at Jubail(Saudi Arabia)
Third party Interface (MARK VI TO HONEYWELL DCS)
CISCO(2950) Switch configuration
Installation of EPKS (R210) Server, Console Station & Flex Station
Submission of As-Built Documentation
Development of Drive logics and validation
Preparation of Loop Schematic Drawings

Professional Qualification:

Post Graduate Diploma Course in Thermal Power Plant Engineering (2005-06),
National Power training Institute Neyveli (Southern region).
(Under Ministry of Power, Govt. of India).
Authorized to do Operation & Maintenance Work On 100MW & above capacity unit (as per Indian Electricity Act)

Awarded - Grade 1st Class (76.14% agg.)

Educational Qualification:

B.E in Electronics & Instrumentation Engg. (EIE) With an Aggregate of 80% First Class with Distinction in the Year 2005.

Exposure:

Domain: Knowledge in Power Plant Process and Plant
Automation (DCS), Third Party Interface.

PROFESSIONAL TRAINING & CERTIFICATIONS

Two weeks training on Experion PKS DCS(C200)
Bronze Certification in Honeywell FSC & Safety Manager
Bronze Certification in Experion PKS Server & Controller

ACHIEVEMENTS:

1st Rank Holder in Bachelor Degree.
Received Champions Trophy Award for Qurayyah Power Plant project, Saudi Arabia
Received Bravo Bronze Award for Qurayyah Power Plant project, Saudi Arabia
Received Bravo Award for Rosa Power project, Uttar Pradesh.

Personal Details:
Date of Birth: O8th May 1984
Sex: Male
Marital Status: Single
Language Known: Tamil, and English.
Nationality: Indian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2501 to 2550 of 7037)

Go to Search Parameters...

Brief Description

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

Electrical Engineer

Detail Driven Engineer with an experience of 3 years. Diploma in Mechanical Engineering and a track record of success in consistent achievement of engineering project goals.

Well Test and C&WI services, i.e., Coiled tubing, acidizing, sand control, wireline, Fracturing, cementing, well testing, slickline, e-line, perforation programs, down hole plugs, x-mas tree change outs, and other.

Maintenance and Commissioning of Process control Instruments in Oil and gas Plant.Trouble shooting and faultfinding of ESD and DCS loops.Servicing and calibration of Control valves,pressure,flow,temperature,level control instruments.

2+ years of experience in Automation field. Currently working as Executive Engineer in M/s.Yokogawa India Limited

Analytical chemistry lab-skills for testing materials in quantitative and qualitative purpose with conventional or instrumentation techniques (UV-VIS, Atomic Absorbance and Infra Red Spectrophotometry, High Performance Liquid Chromatography, Gas Chromatography, Flamephotometry.

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Bachelor in Engineering - Metallurgical Engineering.

BE in Mechanical Engr

Design Engineer-Static Equipments with 4 years Experience

Ensuring good quality control of mud system by analysis of drilling Mud additives

Have 10 years in cementing, tools and drill stem testing

MIET Polytechnic, Trichy, India Diploma in Mechanical Engineering, St.Joseph's Higher Secondary School, Trichy. Engineering Group

FEED, DFR, RFP, Detailed Engineering

GULF EXPERIENCE

Instruemnt engineer( PLC ,DCS ,ESD,field instruments )

My name is Adenowo Tosin Akeem, i hold a Bachelor of Science (B.Sc) degree in Earth Sciences(geology). Am interested in your reputable firm which i believe would need my experience. The following is a brief on my experience;

A highly motivated and experienced Construction and Structural Supervisor , with experience in oil and gas industry. An awareness and commitment to HSE implementation. Valuable team member, able to work on oBrief Description:* (Plwn initiative, with excellent man management and communication skills.

Experienced in Planning & Scheduling, Good knowlege of Primavera and MS-Project Software Operations, etc. HND in Mechanical Engineering

I have done post graduation in Geophysics with 1st class/A Grade. i have a year of seismic servicing industry experience working as an Assistant Geophysicist in one of the leading geophysical companies in Pakistan furthermore i have done 4 weeks internship in Prospect Generation Department of OGDCL

Drilling Fluids Engineer, Power Plant Engineer

A hard worker who can create mechnical design. Knowledgeable 3D design such as Autodesk Inventor and Solidworks and can give from the scartch design. Have designed various of automated machine such as test handles, coveyors, laser handlers, jigs and fixtures.

Mechanical engineer, autocad, offpipe, microsoft

Specialized in Corrosion & Materials Technology, Failure analysis, Quality control and Project Management

Electronics Engineer with 7.75 years of exp. in installation, testing, commissioning and troubleshooting of Satellite communication equipments and Vessel Traffic Management Systems which includes Radar Systems, AIS, VHF Systems, Hyd/ Met. Stations, etc

Flow Assurance Engineer

I am Graduated in M.Eng in Petroleum Reservoir Engineering from University of Calgary - Canada in 2006. I have more than two years of experiences in Research Institute of Petroleum Industry (RIPI), National Iranian Oil Company in reservoir simulation projects.

4 1/2 years oil & gas engineering experience (of which 3 years upstream) in conceptual, front end and detailed design.• Bachelor of Mechanical engineering, 2000-2004, from Visvesvaraya Technological University Karnataka, India with First Class.• Post Graduate Diploma in Petrochemical & Refining,

Procees Engineer With 5 Year of Exprience

Diploma Instrumentation, B. Tech Electronics(Appeared) , Skill in Automation Technologhy. Experties in Simens System, step7 , PCS7

I am seeking a Well Site Geologist/Mudlogging position with a quality, client service oriented company. I have worked in Environmental Consulting and Mudlogging/Well Site Geology. My oilfield experience is in Utah, primarily in the Uintah Basin, and also in Colorado, New Mexico, Wyoming, and Texas.

Instrumentation Design Engineer with 5 years experience in Petrolium,Oil&Gas,Fertilizer EPC projects. Knowledge of INtools,AutoCAD,Instrucal,PDMS,Flowel,conval. Knowledge of instrument specifications,loop drawings,JB schedule,INdex,I/O list,Technical Recommandations,Hookup,BOM,wiring

COMPUTER LITERATE MS Excel .MS Word. MS Power Point, (CMMS) Main Saver : JDE Edwards and Maximo & Electrical & Instrument Technician

B.Tech mechanical Mechanical Sr. Sales Executive in Leading MNC.

• Knowledge in Geochemistry, Geophysics, Well Logging, Oil Phase, Structure Drilling, and Direction Drilling and Economic Geology, mud operation ,oil gas analysis ,3D interpretation , Well testing operation.

Technical Sales manager - Electrical Engineering

Caterpillar field service engineer

Piping Designer, MicroStation, Power (Nuclear, Fossil, etc.), Petrochemical, Chemical, Heavy Industrial.

I am mechanical engineer having 17 years of experience in oil and gas construction industry both onshore and offshore. Currently located in Tunisia with petrofac for their onshore gas development project. I am well familiar in all standards and codes applicable for industry,

To participate in periodical inspection and testing of all static equipment of process plants and pipelines to analyse the condition of the equipment.

First Prev [ 51 ] 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out