Resume - I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (...

Misco Jobs

Resume #88291

CONTACT INFORMATION:
View contact information...

I want to find a job of Extraction-Production Onshore Oil&Gas Engineer (Petroleum Engineer), or similar, if you have a position available for my training and my experience.
I would like to work for a job rotation (eg 28 days"on"/28 days"off"), if this is possible.
I do not have offshore experience, but I would like to work as a beginner.

I am Romanian citizen. I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP), with the following specifications:
- Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer Engineer, Optimization Wells, Surveillance Wells, Maintenance of Pipelines - Farm Tanks - Beam Pumping Unit.
- Slickline Team Leader
- Also I have experience in monitoring and reporting production of oil and gas from wells, well intervention, well workover, well completions, water-flooding, chemical corrosion and paraffin prevention.

Curriculum Vitae Petroleum Engineer

Extraction-Production Onshore Oil&Gas Engineer
(With 15.5 years experience in oil&gas engineering)

Education and Professional training

2002-2003: Master Degree of "Enhanced Oil Recovery Engineering", day-time post graduating courses, Oil and Gas University, Ploiesti, Romania
1986-1992: Faculty of "Wells drilling and exploitation of oil and gas reservoirs"(Petroleum Engineer), Oil and Gas University, Ploiesti, Romania (graduated in July 1992)
1981-1985: Industrial nr.1 high school, Bacau
1973-1981: Generally nr.10 school, Bacau

Training courses at Campina Research Institute for Petroleum Technology, concerning:
- Wells exploitation by pumping beam technology (1998)
- Interpretation of measurements using Echometer Well Analyzer equipment, and production regime designing (1998, 1997)
- Wells testing using the Echometer Well Analyzer equipment (1997, 1995)
- Hydrodynamic research of the wells (1995)
- Initiating in computer use (1995)
- Stimulation of oil and gas wells (1994)
- Initiating in Echometer equipment utilization (1994)

Training courses for the use of "Slickline bottomhole measurements equipment",
Reimann Oil Tools, Luneburg, Germany (05.2007)
Training courses for the use of the software of "Slickline bottomhole measurements equipment", Headquarter PETROM-OMV, Ploiesti, Romania (06.2007)

Work Experience
- 1994 – until now: National Oil Company PETROM-OMV, Moinesti subsidiary (Bacau county), Extraction-Production Onshore Oil&Gas Zemes Field Cluster, Romania.

- 10.2007 - to date:
Position: Slickline Team Leader
Duties: - responsible for operations in oil&gas wells of artificial lift and blowout wells.
- I do the following operations in wells: Pressure Traverse Tests, Transient Pressure Tests (Drawdown Test, Build-Up Test, Fall-Off Test), check depth, check tubing.

- 05.2004 – 10.2007:
Position: Deputy Section Head, Technologist Engineer, Night Shift Engineer (Extraction-Production Onshore Oil&Gas Field)
Duties: - undertaking the working program according to the instructions received.
- controlling the well production from the sector and bringing into management attention the low-potential production wells.
- check and supervises working operations: completion, workover, intervention.
- monitoring the good functioning of the overhauling equipment, installations and workover rig.
- drawing up the working program for the malfunction remedy and participating to it's execution
- ensuring, by using the subordinated personnel, the permanent and correct function of the measurement and control apparatus, function of the differential counters from the sites, stations, distributors, permanently monitoring the correct measurement of the oil and gas production.
- participating in all the operations from the extraction sections: hydraulic fracturing jobs, well acidizing, pipeline cleaning up, well treatments etc.

- 06.2003 - 05.2004:
Position: Section Head (Extraction-Production Onshore Oil&Gas Field)
Duties: - I managed a team of 8 engineers, 4 foreman, 100 workers and I supervised the exploitation of 100 wells.
- draws daily activity report of the Department.
- keep in touch with sectors: mechanical, electrical, water injection, intervention, workover, etc. so that the daily activities of the department to carry out in good conditions.
- establishing the optimum regime of exploitation for each well and monitoring obtaining the maximum oil and gas fow rate depending on the potential planned.
- responsible of the correct measuring and movement of all the oil stocks within the section (deposits, wells, sites);
- managing and monitoring the activity within the section, the technical-organizing measurements regarding the program and production planning, coordinating and being responsible of the activity of the subordinated personnel.
- check, supervises and modify working programs of workover, completion and intervention.
- responsible of the correct report of the production.

- 10.2002 - 06.2003: day -time post graduating courses "Enhanced Oil Recovery Engineering" Oil and Gas University, during one year.

- 11.2001 - 10.2002:
Position: Section Head (Extraction-Production Onshore Oil&Gas Field)

- 06.2000 –11. 2001:
Position: Night Shift Engineer (Extraction-Production Onshore Oil&Gas Field)
Duties: - co-ordination of the section activity between 16 p.m.–7 a.m.
- organizing the production process in my shift and its distribution on the subordinated personnel.
- ensuring the technical assistance necessary for the correct application of the working technology.
- check and supervises working operations in my sector: completion, workover, intervention.
- monitoring the good functioning of the overhauling equipment, installations and workover rig.
- controlling the registration modality of the technical-productive data.
- calculating the stock production out of the stock for each shift.
- monitoring the oil pumping to the central farm tanks.
- drawing up the telephonic report of the section during the shift.
- monitoring the good functioning of the well field from the automation station.

- 02.1997 – 06.2000:
Position: Toolnight Pusher (Workover Section)
Duties: - co-ordination of the section activity between 16 p.m.–7 a.m.
- organizing the work process in my shift and it's distribution on the subordinated personnel.
- depending on the program received check, supervises and modify the work programs of workover, completion and intervention.
- ensuring the technical assistance necessary for the correct application of the working technology.
- controlling the registration modality of the technical data.
- drawing up the telephonic report of the section during the shift.
- monitoring the good functioning of the overhauling equipment, installations and workover rig.

- 03.1994 – 02.1997:
Position: Engineer within the Technical-Technological Office.
Duties: - I managed workshop of sucker rod pumps.
- participating in all the operations from the extraction-production sections: hydraulic fracturing jobs, well acidizing, pipeline cleaning up, well treatments etc.
- supervises operations: workover, completion, intervention.
- well testing jobs performed with Echometer Well Analyzer equipment:
- dynamic measurements (casing fluid level, dyno-card, power, counterbalance)
- transient pressure tests (build-up tests)
- well performance evaluation works performed with:
- Well Analysis Software (ECHOPUMP): developed by Echometer
- RODMASTER-Design: developed by S.A. Holditch & Associates, Inc.

- 11.1992 – 03.1994:
Position: Engineer at Ciprom Ploiesti - Drilling water wells for small depth.

Supplementary Information:
Foreign languages: English – good (intermediate), French – basic knowledge.
Knowledge of PC operation (Windows NT, Ms-Dos, Word, Excel)

Personal skills:
Availability to work in a team.
Good analytical and organizational skills.
Self motivated, good communication skills.

Others:
Without military obligations.
Available for job purpose travelling.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 7055)

Go to Search Parameters...

Brief Description

I am a very experienced cementer thats is hard working, enthusiastic, reliable and trustworthy and also able to lean new things fast.

Oilfield Experience: 25 years

Instrument & electrical design and field work

Sr. piping designer/checker, total 21 years experience in oil and gas field

Autocad, Bentley AutoplanXP, Navis Works, Isogen, Excel, Access, Word

Reservoir engineer - Experience in tight sands and shale and CBM

I have more than 10 years of maintenance experience as an instrument technician

I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline

NDT Level III

My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria

A highly effective Chemical Engineering Professional who meets challenges head-on and creates positive change. A creative and detail-oriented Six Sigma Black Belt, with a proven record of success in new product development and process improvement; and track record of success developing and leading

BSc in env. MSc in safety eng.

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

Field Engineer

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.

Seeking challenging Position in Project Management where I can use my Experience, Market Exposure, Management Skill and Communication to achieve the high goals set by the organisation

7+ Yrs Exp in Mechanical CAD/FEA/CAE/CFD

I have 10 years of experience in E&P business, evaluating basins interms of potential, play maturation, volumetrics,maturing prospects, interpreting seismic data, building geological and facies model, well operation, seismic inversion, fluid substitution modelling, porosity estimation, AVO analysis.

Well Service / Wireline / Snubbing / Workover Supervisor

Over 18 years of combine experience in Oil and Gas mostly in Engineering Design projects from FEED to Detailed design for Offshore and Onshore projects, Subsea structures, Structural Piping design, Mechanical, Electrical and Civil work, and other similar structures and equipment details, assemblies

Field & office design, using PDS program, review drawing before send to approved

Procurement Buyer – at Snamprogetti Romania a company of Saipem Responsibilities: - responsible for the process of Liquidated Damages

Senior workover & completion operations supervisor with 7 years experience in HPHT oil wells in different workover activates, gained master degree in petroleum technology, BSc degree in Petroleum Engineering & recently warded IWCF certificate drilling supervisor level.

SUMMARY OF EXPERIENCE Eleven (10) years of very sound technical proficiency as a “Sr. Piping Designer / Draftsman”in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area’s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping s

Hands on experience on High Pressure Mobile Hydraulic Systems (Closed Loop & Open Loop Systems), which includes Variable & Fixed Displacement Hydraulic Pumps & Motors, Various types of Hydraulic Valves, Proportional Valves, and Electro Hydraulic Actuators, Hydraulic Cylinders.

Diploma in Electronics And Telecommunication Engineering. 18 years experiance in instrumentation field ,specially caliberating ,servicing ,repairing electronics instruments

Specialist in QA/QC-E&I, having more than 17 years experience in large size Electrical and Instrumentation construction works

Bachelor of Engineering (B.E) ¨C Electrical and Electronics (1996 to 2000), with 72% at Bharathiyar University, Coimbatore, Tamil Nadu, India.Master of Business Administration(MBA) ¨C Annamalai University,Chidambaram, Tamil Nadu, India.

Experience in Design and engineering of Pressure Vessels, Heat Exchangers, Columns, Reactors, Storage Tanks as per National and International Codes like ASME Section VIII Div. 1 / Div. 2, TEMA, API 650/620, API 660, API 661, WRC ,UBC, IS 875, IS 1893, ASCE, IBR and etc.

Project Controls Estimator

Power Industry Plant Manager - Over 35 years of progressively diverse experience encompassing electric utility generation operation and maintenance, reliability improvement and facility management

i have worked with many multi national firms.I want to obtain a position of Plant manager/Maintenance manager/Service manager in your company. I have done courses under shell company Safety awareness. Incident and injury free. Defensive driving. Safety induction.

35+ years as Drilling Engineer, Drilling Supervisor, and Drilling Superintendent

Project Engineering, Construction, Contracts, Commissioning, Start Up.

Piping DEsign Engineer with 13 years of experience in the field of refinery, petrochemicals, fertilizers. Experience in layouts, materials, stress analysis. Presently working with KNPC, Shuaiba Refinery, Kuwait

Technical Professional with over 20 years global experience in Petroleum Engineering, Intervention Services, Project management, On-site Supervision, Proposal and Report preparation, Contract preparation and Administration.

A hardworking and highly competent Electrical Engineer

A petroleum geologist proficient in interpreting and integrating well logs, core analysis data, petrology, 2D and 3D seismic, well test and production data to develop prospects and drilling opportunities leading to the economic production of hydrocarbon.

QA design and Quality Control including conduct of coordination and various inspection activities on mechanical packages in UK, Europe, USA, Middle East and Far East. Computer system / procurement activities.

My objective is to start a new career in Indonesia that would allow me to expand on my twelve years of sales, marketing and contract experience in the service sector for the Indonesian Oil, Gas and Geothermal business after retiring from Schlumberger.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out