Resume - I have many years experience in design (Solidworks), documentation, and manufact...

Misco Jobs

Resume #88357

CONTACT INFORMATION:
View contact information...

Objective Transducer Design Engineer

Experience President/Owner:
01/1990 ¡V 11/2008 RSIndustries, Inc., Automation Specialists, Camby, Indiana
„X General management
„X Machine design and fabrication
„X Sales and marketing
Manager, Manufacturing Engineering
05/1984 ¡V 01/1990 Biosound, Inc., Indianapolis, Indiana
„X Director of Operations
„X Manager of Engineering Services
„X National Service Manager
Service Manager ¡V Medical Imaging Division
08/1979 ¡V 05/1984 Boehringer Mannheim Corporation, Indpls., IN
„X Field Liaison Engineer
„X Parts & Repair Manager
„X Parts & Service Technician
General Contractor
07/1973 ¡V 08/1979 Robert Schrock Construction, Nashville, Indiana
„X General management
„X Residential construction
„X Sales & Marketing
Electronic Systems Test Department Supervisor
08/1968 ¡V 07/1973 Electronic Systems Division, Arvin Industries, Columbus, Indiana
„X Supervision of 24 technicians
„X Assistant to Engineering and Quality Assurance Personnel
„X Senior Electronics Technician - Military Aircraft Navigation Equipment
Education Indiana University, Bloomington, Indiana
Eastern Mennonite College, Harrisonburg, Virginia
Capitol Radio Electronics Institute, Washington, D.C.
Received Diploma in Communications Engineering
1966 - 1973

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 7051)

Go to Search Parameters...

Brief Description

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Electrical Maintenance in Petrochemical Industry

Extensive and diversified experience in the field of Onshore & Offshore Oil &Gas, Petrochemical, Refinery, Chemical Plants for FEED, BASIC Design & Detail Engineering for various types of Static Equipments viz. Pressure Vessels, Columns (CS & CLAD), Towers, Reactors, Heat exchangers, steel structure

Telecom

Mechanical senior technician,• Carry out maintenance work independently in the repair, overhaul, troubleshooting, alignment of rotating equipment like (pumps, compressors, fans …), spares requirement…

I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Integrated Geoscientist & Reservoir Geophysicist-Geoscientist/3D Modeler

unigraphics designer drafter

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

Safety/HSE Manager

Instrument, production,control room technician, shift supervisor on chemical plant. worked off shore on shell dunlin,cormarant and nelson, british gas morecambe bay,conoco sns, wellhead control,subsea. on shore i.c.i., dupont, ukaea, power stations. Tricon , modicon plclc

Technical Manager Maintenance Planner, Semisubmerisble engineer, hydraulic engineer, diesel engineer

I have worked in the oilfield for 39 yrs as seaman, bosun, crane op, and barge engineer/master.

P.ENG with 14 years experience in reservoir management,reservoir engineering analysis, economics evaluation,well testing

Offshore Crane Operator/Technician/ Lifting Specialist

Total 14 years of Post Qualification Experience out of which 4 years of Experience in Oil and Gas & Refinery Piping Design and 10 years in Power Plant Piping. Total Experience consists of Piping Detail Engineer-ing, Physical Design Deliverables and Stress Analysis

A self motivated and result oriented professional with 11 years experience in various Industries such as Oil & Gas drilling and Community Services using latest technologies. In recent past I am working in the areas of drilling, administration, customer relations and services and training/development

Sr. Piping Designer/Checker

20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)

Total of 33 yrs exp with 15 yrs international exp in oil and gas as wellsite/geosteering geologist in Carbonate and Clastic reservoirs, gas detection/mud logging, description of cores and drill cuttings, interpretation and correlation of electrical logs

HSE Process Safety

Fourteen plus years of international experience in the wireline logging industry with one of the leading oilfield service providers. Worked my way up from Wireline Field Engineer through several roles to my latest job as a Field Service Manager

Over (15) fifteen years of working experience in Oil and Gas onshore and offshore facilities in the field of Electrical and Instrumentation, inspection in the constructions, testing and commissioning of power plants and Floating Production and Storage Offloading ( FPSO ).

25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea.

22 years of aircraft maintenance related experiences with the United States Air Force

Refinery process engineer

i worked in a mudlogging unit for 13 years; i'm a unit manager , i'm IWCF Certified, i know deeply all the drilling operations

I have many years experience in design (Solidworks), documentation, and manufacturing of high resolution medical ultrasound imaging equipment, as well as extensive experience in industrial automation components and systems.

17 years experience covering all aspects of Structural, Design, Management, and Construction. Working through various positions from the shop floor as Superintendent Draughtsman, Designer, Lead Structure designer and Checker, Project Engineer, Site engineer, Quality control and Bidding. Working for

Offering Extensive Experience in Industrial Electrical/Instrument Equipment And Systems.

electrical engineer

Instrument technician I am the former employees of one of manure / fertilizer company biggest in Indonesia.experience my job 25 yeard ( start December 1982 up to April 2008 ) area of fild instrumentation proces work responsibility : technician of calibration, loop

Certtified hygienist with more than 30 years of experience. Presently working both onshore and offshore in the Middle East. Qualified OHSAS 18001 auditor. Masters degrees in both Occupational Health & Environmental Management. Excellent interpersonal skills. Looking for challenging position.

Key Competencies: over 20 years of experience in technical jobs: On shore, Oil, Gas and petrochemical and Power Plant Industries involved in Project Management, Commissioning Maintenance and repair, Lubeoil/seal oil flushing of compressors and pumps, QA/QC rotary and static equipments, etc.

Senior Mechanical Engineer (Projects/ Engineering / Design). I have diversified experience of about twenty-four (24) years in the field of Design & Projects Construction of Gas & Oil Production(onshore / offshore), Artificial Gas Lift, Water Flood and Oil Refining.

I provide professional pipeline engineering skills for the owner firms

Multifaceted, driven, and highly motivated professional seeks a Senior Level Drilling Engineering position in a dynamic and high-paced environment.

Worked in IMECO (International Mechanical & Electrical Company) UAE as a Asset Management Specialist to manage & controlled Electro-Mechanical Data using by Maximo. Provide data on-time as per the requirement of the Departments, users & Oil Companies.

Logging geologist / data engineer 12year experience offshore - interested in offshore Geologist or Night Drilling Supervisor positions.

Through my current work experience (+10 years) in the oil & gas, I have gained the necessary fields operations, production and troubleshooting skills and I feel confident in my ability to accurately assess technical problems and develop effective solutions.

10 years experience Piping Engineering including Stress Analysis of piping connected to vessels, pumps, compressors, exchangers, psv’s/ flare lines; prepared piping layouts and material specifications; carried out check/ analysis for flanges, trunnions, and nozzle allowable; prepared specifications

Strong background experience (19 years) in petroleum engineering, optimizing oil & gas fields, plants operations and gathering systems. Leading operation team in planning and monitoring production activities

Analyze requests for contracts initiation and develop contracts packages, set and recommend qualification / evaluation criteria and negotiation strategies and attend the same, coordinate and advise users Divisions on contractual and commercial matters.

I am currently working as Principle Process Specialist for Worley Parsons MEG, Calgary. I have more than twenty-four (24) years of experience in process design, conceptual studies and operations, for oil and gas projects (both onshore and offshore), petroleum refineries and petrochemical complexes.

CSWIP Senior Welding Inspector BG Grade 2 Painting Inspector NDT ASNT Level 2

Using Eclipse Simulator for history match and prediction of oil and gas reservoirs.

Reservoir Engineer,18 years of experience from Condensate to Heavy oil fields, over 4300 hours of intensive petroleum training. Extensive experience as Integrated Team Leader. Extensive experience with Single and Multilateral Horizontal wells in Heavy Oil field. Simulation, planning experience.

Having more than 14 years experience in Welding Inspections, , construction, fabrication, installation, commissioning in QA/QC Multidiscipline field as TPI or clients representative of Major Projects in the heavy construction industry including, onshore & offshore. Petrochemicals Facilities, Fertili

11 yrs Experience in Construction - Inspection Fields

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out