Resume - I have a lot of experience in drilling and drilling fluids.Desired position is F...

Misco Jobs

Resume #88383

CONTACT INFORMATION:
View contact information...

Executiv summary:
I am a highly experienced engineer in drilling and drilling fluids activities.In this period,I participated at the drilling activities of many wells for oil and gas with depth between 800-5000m,vertical,deviate and horizontal.I participated at training sessions and outside training courses organized by my companies.I managed to establish a good relations with customers,my crew members and all members of all companies involved in drilling process.

Work Experience:
2006-2009--Drilling Fluids Specialist II, M-I SWACO-Romania
Responsabilities:
Buiding and maintaining the best proprieties of drillind fluids during drilling and other ope-
ration at the wells.Running on daily basis,at well location,with the proper laboratory kits,all tests for the drilling fluid according to the A.P.I.standards.Issuing daily reports for the Benefi-
ciary and Drilling Contactor,as required.performing recaps,inventorying productsand costs,re-
ordering and re-stocking needed materials and chemicals.Determining,recommending and co-
ordinating the necessary treatments for fluid maintenance within the design parameters.Provi-
ding technical support and good level of communication with M-I Swaco customers.Respond to variation in mud condition in a timely and professional manner.Acting according with local and internal QHSE rules.Providing computerized consulting regarding the fluid hydraulics(
rheological features,pressure drops etc.),daily variation of fluid parameters,chemical consum-
ption and costs recorded over the entire duration of the operation.Monitor mud consumption and respond to downhole mud loses in a timely manner.Conduct well lolcation pilot testing for unusal mud treatments,or as required by Company well location supervisory staff,to avoid unsuitable or potenyially damaging or incompatible additions to the circulating system.Pro-
active engineering of the drilling fluid system.Prepared Final Well Report as required.Buid strong relation with team members in field.

2005-2006—Drilling Supervisor, NABORS DRILLING-Oman branch
Responsabilities:
To supervise and ensure work progresses in accordance with company approved drilling programs.Implementing the company's procedures and new technologies in field.I have promoted continual monitoring and structured improvement of performance and efficiency.

1999-2005—Drilling Supervisor and Safetyman, PETROCONDUCT-Romania
Responsibility:
Perform and supervise drilling operation on the rig following the required standing in-
struction/procedures.To manage,directed and motivated-assignet team to ensure efficient, timely and safety execution of planned activities.To implement thje Company's HSE policies in field.

1991-1999—Rig Manager, DRILLING WELLS COMANESTI-Romania
Responsabilities:
I was responsible for all paperwork generated at the rig.I also ensured that the operation comply with company policies and government regulations.During this period I made arran-
gements to prepare areas for driling and also organized the setting up and dismantling of rigs.
I have monitored the proper implementation of drilling programs.Ensure that the rig operation are well documented and related reports are issued.Responded to emergency and non routine situations,provided required instruction and ensured that appropriate measures are implmen-
ted to reliefe the emergency situation.Ensure that work under my control is performed in a safe and environmentally sound manner.Continously strive to improve the performance of drilling operations,contractor equipments and service company resources under my control.
Build strong relation with team members in field.I was subordinated to the technical manager.

1988-1991—Toolpusher, DRIILING WELLS COMANESTI-Romania
Responsabilities:
I coordinate the work of one shift of drilling crew.I made sure that the rig operations are
Well documented and related reports are issued.Assured technical integrity of drilled wells.
To keep costs down and the equipments in good repair.Implement the company health,safety and environment policies,procedures and regulations.Subordinated to the Rig manager.

Education:
Petroleum-Gas University of Ploiesti, Drilling –Production Engineer Diploma
(1983—1988)
Proffesional training:
-IWCF Drilling Supervisor Certificate nr S37344RO4810164,Issue date:05.02.2006
-Nabors Drilling Training courses: Rig management system,First aid&CPR,Hydrogen
Sulphide,Fire fighting,Safety leaders'workshop,New employee orientation,RMS orien-
tation,Drilling competency,RMS modules,Rig start up,IADC rig pass.
-M-I Swaco Basic Drilling Fluid Technology Certificate,Issue data: 03.11.2006
-M-I Swaco IFE: Completion&Workover fluids,Waste management&treatment service
-M-I Swaco Training courses:Drive Smart,H2S awareness,Safety equipments
Obervations:
- Fluent use of Windows based PC software such as MS-Word,MS-Excel
-Foreign languages: English-good, French-good
-I have Driving License categories: B,C,Dand E
-A highly experienced leader and a communicative person

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 7037)

Go to Search Parameters...

Brief Description

Free! Completion Supervisor for vertical and horizontal wells with 14 years experience

Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position

Experienced Ph.D Reservoir Compositional Simulation Engineer

Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC

I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.

30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.

cfd, thermal, aircraft, turbomachinery

I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .

A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for

A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi

I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc

23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)

Process Flow Assurance Engineer

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

I had a master degree in structural engineering from the University of Southern California.

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

More than 25 years in OIL & GAS Offshore and Onshore Industry.

Senior Geologist - Develoment Geologist - Advisor

Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation

Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.

MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities

Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.

Control System Engineer

Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects

Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.

Mechanical maintenance trainer

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design

27 years experience in reservoir engineering, from field operations to pressure testing and simulation.

A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c

SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out