Resume - 11 years experience in offshore construction, field engineering, planning, offsh...

Misco Jobs

Resume #88401

CONTACT INFORMATION:
View contact information...

EDUCATION
B. SC. In Mechanical Engineering
Faculty of Engineering Alexandria University.
With Good Degree in June 1996.

Diploma in Offshore Engineering
Arab academy for science and technology and maritime transport.
With Excellent Degree in June 2007

QUALIFICATIONS
PMP
Project Management Professional
Project Management Institute Jan 2009
Languages:

* Arabic Mother tongue
* English Fluent spoken and written
* French Fair

Current Position Description:

Operations Engineer J Ray McDermott MEI.

Training Courses:
1. Wire rope inspector level 1
2. Applications of M/S office AutoCAD
3. Offshore marine survival
4. Basic fire fighting
5. Basic first aid
6. HUET
7. Principals of pipeline design
8. Safe Lifting

Work Experience:

1. Operations / Lead Field Engineer (JRM)
From June 2006 till now

Directly reporting to the project manager and offshore division manager in execution of the project activities as:

* Coordinate all project vessel requirements and movements
* Monitoring the progress of the work and site conditions and advising of any developments that may result in changes to the work schedule.
* Issuing and maintaining the offshore schedule for operations under his supervision, and advise concerned department.
* Reviewing and approving installation procedures and engineering to ensure they meet project and McDermott minimum requirements.
* Resolve any technical problems that arise during offshore installation and assist in any corrective action that is required.
* Develop the scope of work, assist in the award of subcontracts and then coordinate same. review invoice received from vendors and subcontractors.
* Provide or coordinate input to the tender process as required.

Sr. No. PROJECTS COMPANY
1 BI-10-3008 CRPO 01 for installation of 4 jackets, 4 production decks, 3 mezzanine decks, 2 deck extensions, 4 pipelines (size 16"), 4 Cables (5 Kv to 69 Kv), and ICCP anode sleds with cables at 4 platforms in Berry and Safaniya offshore field in Saudi Arabia. Aramco
2 LTA Project BI-10-08299 for installation of 13 jackets, 14 production decks, 1 tie-in jacket(6 leg), 12 pipelines (size 8" to 40"), 5 Cables (5 Kv to 69 Kv), and ICCP anode sleds with cables at 4 platforms in Marjan, Zulf, Safaniya and Karan offshore field in Saudi Arabia. Aramco
3 Qatar Gas 3&4 to install Offshore Facilities for the QG 3&4 pipeline project, in the State of Qatar. Prior to Pipeline Installation, 248 No. of mattresses will be installed at specific crossing positions along the related Pipeline route with additional contingency/adjustment mattresses. Using M.V. "Agile" to install mattresses.
Qatar Gas 3&4
4 6600015768 (OOK) and 6600015769 (IK), BI-10-08297 Maintain Potential Facilities for the "Detailed design, procurement, fabrication, assembly, transportation of (Platforms, jackets and pipelines) by Saudi Arabian Oil Company (Aramco). Installation Procedure preparation and installation supervision for Aramco LSTK, 3 jackets (ZULF 330/339, ZULF 350/359, SFNY TP-18), 3 PDM ( SFNY 656/665, ZULF 330/339, ZULF 350/359), 1 scrapper deck ( SFNY TP-18 + bridge to SFNY 646/655 and 4 pipelines associated activities (crossing and freespane rectification – production and tie-in subsea spools – scrapping and hydrotest)

Aramco
5 BI-10-00452 for installation of 11 new Jackets and 13 Topsides, including modification of 24 existing Observation Platforms, and installation of anode sleds with cables for ICCP System in Manifa offshore field in Saudi Arabia. Aramco

2. Site Manager / Deputy Project Manager:
From March 2005 up to June 2006

- Company: PETROLEUM MARINE SERVICES (P.M.S.).

Directly reporting to the project manager and assist him in the execution of the project activities as:
* Management of the project and control of the related personnel
* Project master schedule and control of its fulfillment
* Budget over-running and procurement.
* Coordination and super vision of activities
Sr. No. PROJECTS COMPANY
1 Sub sea inspection survey for M-36 P/F (Rehabilitation Project)
For 24 P/F using ROV comprise:
General video inspection
Flooded member detection
CP inspection for anodes

GUPCO
2 CGOS pipeline laying program 2005/2006
Consortium between Saipem And PMS for, installation of Four (4) pipelines in the Gulf of Suez area, and the associated sub sea tie-ins, topside hook-ups and topsides modifications to Three (3) platforms, and one shore approach.

GUPCO

3 Infrastructure project
Piping demolish and new piping installation
M-8 P/F reinstatement
Miscellaneous boat landing repair, Deck extensions.
GUPCO

3. Field Engineer: From October 2002 up to March 2005

- Company: PETROLEUM MARINE SERVICES (P.M.S.).
AT PJ-11 Derrick Laying Barge (With Saturation Mode).

Mobilize barge with the necessary equipment, consumables and project material prior to its departure to the field.
* Ensure that all work is done in accordance with the approved procedures and drawings.
* Prepare procedures for installation work at particular location; monitor the progress of work, quality and safety aspects.
* Prepare a work plan for the barge operation on 24 hrs basis.
* Coordinate and monitor sub contractor's performance on the barges.
* Prepare as-built drawings and other engineering documents
Sr. No. PROJECTS COMPANY
1 Fabricating and installation of 12" riser at MORGAN-36 and P/L crossing GUPCO
2 Fabricating and installation of 18" riser, deck extension and 18" jumper line at MORGAN-8. GUPCO

Sr. No PROJECTS COMPANY
3 HILAL Re-enforcement for the jacket GUPCO
4 Crossing and free span correction for the 18" P/L laid from MORGAN-8 to Ras Shukier. GUPCO
5 Fabricating and installation of 12" and 8" risers with the tie-in spools at EDFU P/F GUPCO
6 PF-C deck installation.
PF-C, Risers tie-ins subsea spool ZEITCO
7 PF-A, Top Side Facilities.
PF-A, Risers tie-ins subsea spool. ZEITCO
8 MWP-5, Tripode installation PTB
9 PFSE-1, PFSE-2, PFSW-2 Upgrading. PTB
10 Pipe lying 8" P/L from Shore to ESMA-8
Free span rectification – Pigging and hydro test GUPCO
11 Pipe lying 18" P/L from M-36 to M-8
Free span rectification – Pigging and hydro test
18" old riser removal at M-8 and new riser installation
Install tie-in spool piece at M-8 GUPCO
12 Pipe lying 4" SIMIAN P/L TECHNIP
13 Pipe laying 10",4" and 3" Piggy back at Temsah field PTB
14 ESMA 2 subsea wellhead spool replacement GUPCO
15 Demolish 18" riser and installing new at M-8 and M-36 P/F GUPCO

3. Project Engineer: From September 2001 to October 2002

- Company: P.M.S. AT PJ-11 Derrick Laying Barge.
(With Saturation Mode).
Sr. No. PROJECTS COMPANY
1 Uncrossing of 14" and 6" P/L at AKHEN filed. GUPCO
2 P.F.S.W.-2 Top Side Facilities Tie-ins subsea spool PTB
3 Esma-8, Morgan-8 P/Ls Precrossing GUPCO
4 12" P/L repair Between October A and October E P/Fs. GUPCO
5 Pipe lying 8" P/L from Shore to ESMA-8
Free span rectification – Pigging and hydro test. GUPCO
6 PFSW2 Start up and commissioning PTB
7 14", 6", 3" Akhen subsea Tie-ins spools- Pigging and Hydro test GUPCO
8 Installing risers and subsea spools for EDFU project. GUPCO

5. Project Engineer. From June1998 to September 2001

- Company: PETROJET AT D.L.B. PJ-12.
Sr. No. PROJECTS COMPANY
1 Pipe lying of 36" P/L from shore to Darfeel P/F using automatic welding system. PTB
2 Decks Installation and TSF Darfeel P/F. PTB
3 Pipe lying of 16" P/L from Darfeel to PLEM PTB

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 7055)

Go to Search Parameters...

Brief Description

TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks

Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.

More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.

More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.

Involved in commissioning and pre-commissioning activities.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

„Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion

Chemical Engineer, P.E. Petrochemical Design Background Experience

Rotating equipment / mechanical maintenance technician / Commissioning technician

Structural Designer

diploma in mech.eng, NVQ-level -3

Twenty five years in the Oil and Gas industry all of which was in the discipline of Project Services and Controls, providing leadership in Estimating, Cost Control, Planning, Scheduling, Contract Administration services. In-depth exposure in Heavy Oil, Natural Gas, Petro-Chemical, Compressor Package

PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

20 years of experience in the field of computer s/w and h/w

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

Technical / Lead Safety Engineer

NDT inspector LVL II

11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement

Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection

A highly motivated professional with 10+ years of diverse hands-on experience in conceptual process design, technical services and developing/upgrading of upstream oil processing facilities. Worked on petrochemical projects, oil sands technologies and water/wastewater treatment plants from front end

Piping Designer with 12+ years of experience in piping design & detail engineering involving Equipment layouts, Piping layouts, Piping isometrics, Tie-in Schedule and Pipe supports for Onshore & Offshore Oil & Gas, Power and Petrochemical Plants. Have good knowledge of all national & international c

Current Position as Air Separation Unit Technical and Process Specialist for Petronas Gas Berhad with previous experience with Air Products Chemical Incorporated and Messer Griesham. Some college from Texas Tech University, Lubbock, Texas USA.

Process Engineer Resume Oil and gas

Piping Field Engineer – Technical Office

14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL

PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE

Level 2 UT EN473, RSO, Previous Level III PT,MT,RT. Advanced inspection in Phased Array and TOFD - Good computer skills

civil/structural engineer/manager

19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.

I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.

Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production

Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins

Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm.

SUMMARY Exploration and appraisal geosciences professional with extensive background in domestic and international prospect evaluation and reservoir characterization. An accomplished, resourceful, and versatile oil finder with strong communication and interpersonal skills.

More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).

Business Analyst Technical Writer Project Manager Programme Director

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out