Resume - Experince at:: small and mid-sized projects involving integrity/rehabilitation/r...

Misco Jobs

Resume #88442

CONTACT INFORMATION:
View contact information...

JOB TARGET: Pipeline Engineer

SUMMARY OF SKILLS:

* Supervise small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas
* Good knowledge of pigging operations
* Good experience at pipeline design
* Familiar with CSA, ASME, API, ASTM, and NACE standards

WORK EXPERIENCE:

June 2009 - Present: Project Engineer – GE PII Canada Pipeline Solutions, Calgary - Canada

* Cost estimating & control, engineering, planning, preparation of bid documents, (sub)contract negotiations – Smart pigging operations

June 2007 – May 2009: Pipeline Technical Specialist – Colt WorleyParsons, Calgary – Canada

* Wall thickness selection for liquid pipelines – CAD 2 billion value projects
* Hydrotesting plan preparation
* Pipeline pigging facilities design
* Pipeline routing
* Technical drawings and documentation review
* Alignment sheets preparation
* Material specifications and data sheets preparation
* Material Take Off activities, discrepancies identification and correction and shortfalls mitigation
* Bill of material, and material requisition preparation
* Developed specifications for post-construction caliper pig and tie-ins

July 2006 – May 2007: Pipeline Integrity Specialist – In-Line Pigging Solutions, Calgary - Canada

* Office support for pipeline cleaning and In-line inspection operations
* Technical assessment of computer model designed for use as integrity program risk assessment
* Prepared annual HSE certification program
* Revised and updated of technical procedures relating to pipeline pigging operations
* Pipeline network inventory audit and correction ( 2000 km)

May 2005 – June 2006: Self-employed Oil and Gas Contractor/Workplace Experience Program -
Elevation Resources, CIMARRON Engineering, Calgary - Canada

* Shallow gas corrosion study involving data gathering and gas and water analysis
* Evaluated technical aspects of new pipeline material (fiber basalt) and developed qualification testing procedure
* Analyzed and correlated in-line inspection (ILI) data for pipeline SCC features
* Created "Recommended Safety and Maintenance Procedures" document for pipeline replacement program (done via road bore)

1992 – 2003: Lead Pipeline Engineer – Sonatrach – Transportation Division, Bejaia, Algeria

Maintenance Lead for 1220km of NPS 8 to NPS 42 crude oil and natural gas pipelines and related facilities (piping systems)
* Managed and supervised emergency response team for pipeline remediation on leaks and ruptures (>100 projects)
* Pipeline Integrity management plan development
* Conducted pipeline and piping systems projects rehabilitation and construction > CAD 2 million value (multiple projects simultaneously)
* Development of pipeline maintenance manual and emergency pipeline repair procedures including emergency response plan
* Participated in the design of facilities to be revamped

1990 – 1992: Pipeline Engineer – Sonatrach – Transportation Division, Bejaia, Algeria

* Client Supervisor on NPS 24 pipeline construction (50km) involving complex project logistics to overcome (multiple river crossings, roads and railway crossings)
* Designed and managed the construction of an aerial pipeline network from 4 to 32 nches with valves, piping, supports, expansion joints

1986 – 1990: Lead Engineer - Ministry of Industry and Energy, Bejaia, Algeria
* Conducted site follow-up on application of regulatory guidelines related to the oil and gas industry

OTHER EXPERIENCE:

1990: Teacher - National Institute for Vocational Training, Bejaia, Algeria - Thermodynamics

EDUCATION:

2007 – 2008:Project Management, Insights Discovery training, Safely, H2S Alive, First Aid
2005 – 2006: First Aid, CPR, H2S Alive, Petroleum Safety Training (PST) with WHMIS,
Pipeline Materials: Mechanical Behaviour and its Impact on Pipeline Integrity, Calgary

September 2004 – July 2005: English as a Second Language program - Columbia College, Calgary, AB

1993 – 2002: Project Management, Communication, Occupational Safety, First Aid, Welding, Metallurgy, Corrosion, Cathodic Protection, Coatings, Valve Calculation, Pipeline Pigging, Inspection and Rehabilitation, Pipeline Integrity, Hot Tapping

1998 (1 month): Practical Welding and Repair Technology - JCCP Tokyo, Japan
1984: B.Sc. in Petroleum Engineering – Option Oil and Gas Production - National
Institute for Oil, Gas and Chemical Engineering, University of Boumerdes, Algeria

MEMBERSHIPS:

* ASME and NACE member
* Registration as a Professional Engineer in Alberta in progress

LANGUAGES: English, French and Arabic

CITIZENSHIP: Dual Algerian and Canadian citizenships

REFERENCES: Excellent references available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 7040)

Go to Search Parameters...

Brief Description

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

21 years in oil and gas industry in field operations

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

Project Engineer

civil inspector, site manager, civil engineer

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

Mechanical Engineer/Supervisor(rotating machinery)

Extensive experience of combined domestic and international on well logging industry

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Process Engineering Opportunity

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Sr Subsea Controls Consultant

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

20+ Years piping designer

Working for Petrofac International as Commissioning Engineer

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out