Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #88524 next resume »»
CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
* Simulation and process modelling of oil / gas unit operations with PRO-II, HYSYS, and ASPEN PLUS with intention of the plant optimization
* Modelling and optimizing of atmospheric and vacuum distillation towers
* Operating experience of atmospheric and vacuum crude oil distillation units and technical support of the operation to improve units performance and reliability
* Process data analysis for troubleshooting of the operation problems
* Knowledgeable about natural gas treatment plant including glycol dehydration and amine sweetening units as well as natural gas pipeline and compressor stations
* Experienced with combustion system and process fired heaters
* Thermal design and rating of heat transfer equipment and optimizing the design performance of heat exchangers using HEXTRAN, HTFS and HTRI
* Supporting HAZOP / Operability studies to improve performance in health, safety and environmental protection
* Support activities on pre-commissioning, commissioning and plant performance testing
* Major process equipment sizing calculations for pumps, compressors, heat exchangers, separators, drum, columns, tanks, etc. pipe hydraulic calculation (including two phase flow), pressure safety valve sizing
* Hydraulic calculation for oil / gas pipeline using PIPEPHASE and PIPESYS
* Flare network design using FLARENET
* Developing heat and material balance, Process Flow Diagrams (PFD) and Piping & Instrument Diagrams (P&ID)
* Process design and engineering of oil and gas projects at various levels i.e. Design Basis Memorandum, Front End Engineering Design, Detailed Engineering Design
* Extensive familiarity with refinery units such as Hydrotreating, Hydrocacking, Naphtha Platforming (CCR), Hydrogen production, LPG recovery / treating, sour water stripping units and utilities
* Feasibility study for the refinery projects

OBJECTIVE:
------------
Senior process engineer
------------

WORK EXPERIENCE:
------------
WorleyParsons Calgary – Calgary, AB, Canada
Process Engineer Nov. 2006 – May 2009
* Nexen Inc. – Long Lake SAGD oil production field support. Responsible for review & modification of existing sampling system and adding new sample cooler, conducting study on feasibility of increasing water-glycol circulating pump capacity to resolve operation problem and other such issues raised by Plant Operations based on MOC's (Management of Change) scope of work.
* Suncor Energy Inc. – Firebag Hot Bitumen Pipeline Project - Pipeline pumps station and facilities (EDS and detailed engineering design stages). Performed simulations to predict fluid properties, developed PFD / P&ID, performed process calculations, equipment sizing, pump calculation, prepared equipment and instrument data sheets, prepared engineering design specification (EDS) report, reviewed and checked vendor documents and supported HAZOP / Operability studies.
National Iranian Oil Engineering & Construction Company – Tehran, Iran
Senior Process Engineer May 1992 – Aug. 2006
* Tehran Oil Refinery, Iran – Worked in atmospheric and vacuum distillation of crude oil and LPG recovery and separation units in the petroleum refinery. Distillation optimization for producing more distillate (using PRO-II and HYSYS). Assigned to different refinery process units such as Hydrocarcker, Reformer and Hydrogen Production units. Participated in the refinery regular overhaul programs.
* Turkmenbashi Refinery, Turkmenistan – Gasoline Production Unit. Performed detailed engineering design including developing PFD / P&ID, preparing equipment design specifications, hydraulic calculation, material requisition (MRQ & MRP) for chemicals / catalysts for UOP Licensed Units consisting of the Gas Concentration Unit, the Gasoline Merox Unit (24,000 bbl/day), the LPG Merox Unit (12,000 bbl/day) and the Amine Gas Treating & Regeneration Unit. Also supervised equipment installation and participated in pre-commissioning and commissioning activities during the construction phase of the plant.
* Korpeje Gas Pipeline / Facilities, Turkmenistan – Natural gas dehydration facilities and pipeline project. Performed pipeline hydraulic calculation (using PIPEPHASE), process simulations of gas condensate recovery / stabilization unit (using PRO-II), generated heat and material balances, developed PFD / P&ID and prepared equipment design specifications in the DBM, FEED and detailed engineering design phases of 8 MMSCMD (280 MMSCFD) sweet natural gas dehydration plant and gas condensate (NGL) recovery / stabilization unit together with the associated gas pipeline (140 km NPS 40 inches).
* Abadan Refinery, Iran – Refinery Expansion Project. Prepared tender document packages, evaluated proposals including Licensor selection, attended kick off meeting, PFD / P&ID review meetings and reviewed process design specification for following refinery units: kerosene/gasoil Hydrodesulfurisation, C5 / C6 Hydrotreater & Isomerization, hydrogen production, amine treating, nitrogen production, sulfur recovery plant, sour water stripper units.
* Arak Oil Refinery, Iran – 150,000 BPSD grassroots oil refinery construction project. Reviewed of the designed documents of the process equipment in the refinery units including crude oil distillations, Visbreaker, LPG recovery, Unifiner / CCR Platformer, Hydrocracker unit, hydrogen PSA production and amine gas treating, and participated in process and mechanical inspection of the major equipment such as pumps, fired heaters, heat exchangers, towers, vessels / drum, etc.
* Bandar Abbas Refinery, Iran – Refinery Expansion Project. Participated in feasibility study for refinery expansion and upgrading to process ultra heavy crude oil blended with Iranian heavy crude oil as a feedstock, debottlenecking existing capacity (230,000 BPSD), selecting optimum refining scheme, producing cleaner products to meet new environmental regulations, increasing refinery conversion and improving production efficiency.

EDUCATION & CERTIFICATION:
------------
* B.Sc., Chemical Engineering, Faculty of Engineering - Tehran University, Tehran, Iran, 1985- Sep. 1989
* Member of the Association of Professional Engineers, Geologists, and Geophysicists of Alberta (APEGGA)

View contact information...
«« previous resume next resume »»
Search Results (Resumes 451 to 500 of 7049)Go to Search Parameters...
Brief Description
Geologist geophysicist interpretation
Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.
To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti
I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management
Maintenance Supervisor/Security, Maintenance Supervisor I/C, Project Manager, I/C Technician
20 years fire fighting experience.Now working in ADNOC Off Shore facility
Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.
24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.
Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.
Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress
PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.
SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE
Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems
Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken
More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies
I am a professional process engineer with over 15 years experience
Free! Health, Safety & Environment Manager - Crane Inspector - OHSAS 18000 Lead Auditor - Senior Trainer - HSE Master Degree
Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience
A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis
More than 28 years of experience in oil industry
22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities
Experienced Completing and Producing Petroleum Engineer
Quality control,Quality Assurance,Inspection,Project Engineering,Surveillance coordinator
ASNT LEVEL 3 /WELDING PAINTING LIFTING I NSPECTOR
Enquiry specs for compressors, turbines, pump, blowers etc. , technical evaluation of bids, preparation of technical recommendations, checking & approval of vendor documents., interface with other disciplines, knowledge of API standards
17 years experience in EPC environment, on oil refineries and petrochemical projects
INSTRUMENT FIELD ENGINEER
Senior Corrosion Engineer with 14 years experience at metallurgy fields especialy corrosion & corrosion control. expert at painting, insulations,cathodic protection, materials selection, corrosion inhibitors, corrosion monitoring, coatings inspection . I am serious at work.
As a well sit geologist for six years, including one year for Coal Bed Methane, familiar with StripLog, SDL_9000 geological logging software, strong organization ability
Electric Engineer with MSEE with more than 15 years of work experience in oil and energy industry, occupying positions in electric maintenance, utilities plants operation and project engineering management and construction,
I am a postgraduate in civil engineering from the prestigious Indian Institute of Science, Bangalore. My major experience is in Oil industry. I have vast experience in Contracts Management in India & abroad.
Estimation of Oil and Gas EPIC Projects
Senior Electrical Engineer currently working For SonaHess Company (association Sonatrach & Amerada Hess), El gassi Hassi Messaoud.
• 12 years of experience in geology, geophysics and reservoir engineering, drilling operations (including horizontal, ubd, rotating BOP etc)
Mechanical Engineering graduate with experience in EPC - procurement manager
Experienced in sweet and sour, oil and gas projects. Execute projects on time and on budget while working as a team player. Solutions oriented with an eye toward bottom-line results. Organized multiple projects concurrently, with successful results in a fast paced environment. Effective communicat
Instrumentation Engineer
I'm Technical Degree in Geology (Associate Degree in Geology) and I'm looking for a job as Mud Engineer Worldwide.
In addition to my graduate engineering degree and more than 15 year of experience in power generation and chemical plants. I have currenly done my MS in Total Quality management.
Senior rotating equipment with 12 years experience with sound knowledge of project engineering and project management
B. Tech. (Electrical Engg.) from Rajasthan Vidyapeth (Deemed) University, Udaipur.
KEY COMPETENCIES
A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company
Graduate in Mechanical Engineering having 15+years in Static Equipments & Packages Design & detail engg. engaged in Design & detailed engg. of pressure vessels, Columns for Oil & gas Applications and all other types of static equipments & packages, I have a good exposure in EPCM
Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries
Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.
Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage
I am very talented and a hard worker. I have a good eye for any type of construction.
24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:
Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.
First   1   2   3   4   5   6   7   8   9   [ 10 ]   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com