Resume - Iam having five years exp in oil and gas field of hydro treater and Integreated ...

Misco Jobs

Resume #10046

CONTACT INFORMATION:
View contact information...

A. Reliance Petroleum Limited, Refinary Divison, Jamnagar, India (World's Largest Grassroot Refinary-650KBPSD)

PROCESS HANDLED:
I am Working in VGO /Diesel/Kerosene Hydortreating Unit having a capacity of 200 KBPSD of DIESEL of two identical train to achieve 98% Desulfurisation and 70% Denitrification and for VGO having a capacity of 204 KBPSD of two trains to achieve 94%Desufurisation and 54% Denitrification. Inprocessing objective to reduce the Sulfur level to 0.2% at the F.C.C. feed to meet Sox emission to 300ppm in flue gas. Technology supplied by M/s U.O.P and detailed engineering done by BECHTEL
Distributed Control System for Refinery Complex is of Foxboro I/A series 50 and is capable of plant wide automation.

EQUIPMENT HANDLED:
(1) Diesel Charge Pump:
Pump made by BYRON JACKSON LTD.FRANCE
Capacity: 632 m3 / hr.
Head: 787 m
Speed: 2950 RPM
Motor: BHEL
Power: 1300 Kw

(2) VGO Charge Pump:
Pump made by Byron Jackson Ltd.France
Capacity: 730 m3/hr
Head: 1214 m
Disc. Press: 100 kg/cm2
Motor: GECALSTHOM
Power: 2400 kW.

(3) Diesel Furnace: Plant has been equipped with the combined feed heater. Which is vertical box up draft type design for total heat release of 25.79 MMKCal/hr with guaranteed 93.2% fuel efficiency. It is provided with 8 no of JOHN ZINK gas burners basic engineering for the heater is done by UOP and design by HEURTY PETROCHEM, as per the API 560

(4) VGO Furnace: Plant has been equipped with combined feed heater which is a
Box Updraft Type furnace design for total heat release 17.35MMKcal/hr &other is Vertical cylindrical type fractionator feed heater design for total heat release
28.47MMKcal/hr. Basic engg. of heater done by U.O.P. and detail design by
HEURTEY PETROCHEM ENGG. made in France as per API 560.
5) DIESEL REACTOR: Diesel hydrotreator reactor is typically constructed of 1.25 Cr.- 0.5 Mo base metal. Design press. is 51 kg/cm2.and temp is 421 degree c. It consist of two bed catalyst made of oxide of Co -Mo impregnated on Alumina base

(6)VGO Reactor: VGO Hydrotreating reactor is typically constructed by 1.25C0.5Mo Metal base. VGO Hydrotreating catalyst is Ni - Mo impregnated on Alumina base. Diesel Hydrotreating catalyst is Co Mo impregnated on AluminaBase. Design temp & press. is 454 C & 92 kg/cm 2
(7) Power Recovery Turbine (VGO): This turbine is run by High press. Liquid of
70.3kg/cm2 and the Equivalent power generation accounts to560KW.
(8) Recycle Gas Scrubber: It consists of 12 no. of valve trays column dia.3.3m, design press.39kg/cm2. Main function of H2S Removal.
(9) Stripper: It consists of 36 no. of sieve trays. Main function is to remove approx..84wt% of H2S.

10) Recycle Gas Compressor for Hydrogen: ( Reciprocating )
Made by Thomassen International B.V.
Speed: 297 rpm
Suction capacity: 2,00,000 Nm3/hr
Suction press.: 35 kg/cm2
Disc. Press.: 54 kg/cm2
Motor: Jeumount Industries
Power: 4375 Kw
(11) Recycle Gas Compressor for Hydrogen: ( Centrifugal )
Made by GHH-BORSIG. Make Turbine driven singal stage centrifugal compressor.
Steam turbine supplied by SIEMENS.
Speed: 10671 rpm
Capacity: 4,33,385 Nm3/hr
Dish. Press.: 90 kg/cm2
Power: 9253 Kw
Impeller: Six

Nature of Work:-
-Knowledge of field operation, plant startup and shutdown, Emergency handling. Trouble shooting and shift production optimization.
-Routine checkup for all Equipments and Ensure proper entry & upkeep of the logbooks including proper shift handing over.
-Monitoring the process at ¡* standard operating procedure¡¨.
-Ensuring all standby equipment are always in healthy condition and warm up condition.
-Monitoring of smooth and safe operation of rotating equipment like pumps,
Compressors, fin fan coolers, ID/FD fan of heater etc
Operating knowledge of compressor, Steam Turbine, Power recovery Turbine and all types of pumps
-Startup and shutdown of fired Heaters& Checking of firebox and burner flame pattern, burner change over, and daily soot blowing in heater.
-Recovery of VGO, Naptha, Diesel, Kerosene by continuous Fractionation.
-Maintain the record of the past/future shut down job
-Co-ordinate Activities with maintenance, safety, house keeping and clean-up.
-BSC checklists updating periodically
-Knowledge of work permit system, safe work practices and experience in carrying out jobs in running plant.
-Familiarity with relevant safety measures and fire fighting techniques.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 2479)

Go to Search Parameters...

Brief Description

Interested in Entry level Position in Oil Industry

Commercial Manager with over 7 years experience in the UK & Internationally. Additional qualification (M.Sc) in Oil & Gas Engineering. Strong skills in organisation and leadership.; economic analysis, financial modelling and project management. Strong relationship management and sales skills

Motivated versatile professional, with 12 years experience as company representative and Application Drilling Engineer Degree,, within the Major Oil Companies in ALGERIA (drilling division SONATRACH). Team player, with solid interpersonal communication skills and strong commitment to success.

Iam having five years exp in oil and gas field of hydro treater and Integreated offsite plant

I have 20 plus years of experience as an Operator in the oilfields and power utilities.

Free! „X Continually ascertain and adjust operating parameters regarding more than 375 on-base diesel generators.

Geophysicist/Petrophysicist/Logging Engineer ONGC with 3 years experience seeks better opportunity

Process Engineer with 9 years' varied oil + gas experience (consultancy, operations support and design; both onshore and offshore) in London/ Aberdeen/ Perth, seeks interesting opportunities in Arabian Peninsula

Safety Supervisor for almost seven (7) years in experience with ample trainings

To continuously develop and utilize my Skills symbiotically for the benefit of my Organization and evolve myself as a Dynamic Professional. To continue the learning process by working in diverse environment and to achieve great heights of professional satisfaction by making significant contribution.

I am a GRADUATE MECHANICAL & CERTIFIED COST ENGINEER possessing 20 years of diversified experience in Petrochemicals, Refining, Chemical, Fertilizer, Oil & Gas with various multinational companies in Pakistan, Bahrain & Saudi Arabia in the fields of Project control, Cost & Contract Management, Plant

I have worked as a Tour push onshore Venezuela and as a driller offshore Qatar. I am now working as a drilling consultant here in Canada.

Mining, Refining operational experience. Proven Leadership skills, Mechanical background, Strong change management skills, Energetic & positive attitude.

I am a willing and hard working individual who can and will take charge, multitask and complete the job(s) I am a team leader and very open to suggestions to promote a better work environment My Oilfield knowledge is from the field and in the office to better the company and myself.

Young Reservoir Engineer with 4+ years of experience. Areas of expertise include: PTA, reservoir simulation, waterflood management, sand management, naturally fractured reservoirs, calssical RE methods, etc.

7 years of labor experience, mainly focused in the area of idioms, specifically with the English language which I master and have fluency to communication in English, Portuguese and Mandarin Chinese.

Petroleum Engineer

To build up my career in engineering field with high level of knowledge, research and practical experiences in the field of Mechanical Engineering.

PhD chemical engineering, 15 years experience as operations and academic teaching

Derrickman with Strong Petroleum Engineering education background.

I am a high technician in gas exploitation (plant operator), I am working now for BP in Algeria at in salah gas. I will accept all regions.

Righand on service rig setup/teardown rig pull wells and replace pumps rodwrencher pumper

Knowledge in DCS,TMR,ESD,MeteringChermotograph and analyzer,Bently Nevada Vibration Monitoring systms,Tank gauging system,Control systems,Allen Bradely,Siemens Plcs,Scada System,Computer literate with knolowge of Maximo and Complete secondary education with a technical diploma course from recognise

Project Manager with international industrial and commercial experience. Managed and designed Piping, API and ASME tanks and vessels. Have working in Beijing, China and San Juan, Puerto Rico. Able and willing to work internationally. Please see my resume for additional details.

Roughneck/Derrickman

Experienced Equipment and Packaging Field Service Technician seeking a position in Technical, Mechanical, or Packaging Field.

B Tech in Petroleum Engineering with expertise in Reservoir ,Production,Pipeline Designing & Transportation. GPA of 3.12/4.

Desalination Plant Maintenance/Inspection, Materials Testing, Technical Evaluation,Troubleshooting, Supervisory/Managerial Skills

PhD Offshore Dev.: Currently in Houston, TX helping in upstream equipment procurement; experiences with Oil Services Co. and in research/teaching petroleum engrg courses; had done reservoir/well modeling; fluent in English/Russian; available as an intl. Marine Surveyor (Inspector) trainee staff

Bsc. Petroleum Engineering. Experience in HPHT Wells, currently working as a Junior Technical Manager in an oil & gas company in Singapore

Onshore and Offshore Well Testing /Production Operations. Writing Job Tickets and Service Reports. Sand Control on FPSO , Onshore and Offshore Production Rigs and Platform. Data acquisition (Edgex) and Report writing. Surface sampling. Welltest equipment maintenance.

Six Sigma Master Black Belt

2D / 3D Design Consultant, 13 years Oil & Gas Experience starting with 4 year mechanical apprenticeship. Having worked in Aberdeen, Scotland and Oslo, Norway on surface and subsea production equipment (EDP, LRP, BOP, Xmas Trees, etc).

Total working experience 06 years. DCS operator with 06 years of diversified experience in the field of petroleum refining industry. Have been performing shift duties at Attock Oil Refinery, at Naphtha hydrotreator & Catalytic Reforming unit as Control Room Operator. Well versed with the

I am seeking a position in the field of Environmental clean-up. I would be an asset to your company because of the fact that I am a dedicated individual and recently obtained my bachelors degree in Management from the Indiana University School of Public and Environmental Affairs.

6 years experience of Project Management & Execution, Construction Supervision & Quality Surveillance in the Field of Power, Oil & Gas – Pipe Lines with confident communication and Planning Skills.

Experitse in geophysical surveys, geotechnical, hydrogeological investigations, environmental and engineering applications as well as software development using VB.

Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials

Onshore oil gas pipeline construction, coating, testing, commissioning and start–up; pigging / intelligent (in – line) inspection; pipeline maintenance / maintenance management; good knowledge related to pipeline detail design, route selection, alignment sheets and relevant international standards

Project Management/Operations

Instrument Engineer / Supt

WellSite Supervisor

Experienced process control professional skilled in both Onshore and Offshore Oil/Gas operations. Worked in the UK and overseas. A versatile team player with excellent organisational and interpersonal skills. Proven record in Construction, Commissioning and Start up projects.

Warehouse/Supply Management,/Logistics co-ordination and purchasing skills.

Work experience Education Additional information Skills Abilities Hobbies

I am working with Engro Chemical Pakistan Ltd., since start of 1999, as a Chemical Plant Operator at Urea Unit, and wish to join else where in the world.

Professional Heavy Equipment Operator rated with Class B+, Professional Driver for both cars and Heavy Vehicles, Knowledge in Purchasing, Surveying.

piping design, supervision on large projects, estimating/cost and budget control

Landman, Title Research, Leases, Negotiations

Planning Engineer- Production & Materials Having 8 years experience

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out