Resume - Diploma in Chemical Engineering and 11 yrs. of experience of refinery and petroc...

Misco Jobs

Resume #16249

CONTACT INFORMATION:
View contact information...

Name Of Company: Reliance Petroleum Limited. Located at Jamnagar-gujarat-India.
Job Duration Nov. 1998 to till date.

Company Profile
Is a world largest grass-root Refinery having crude oil processing capacity of 32 MMTPA.ISO 9001-2000 Awarded.The company having following plants. CDU, VDU, Hydro-treating, Platformer, Merox, FCC, Coker and Petrochemical complex named Aromatics.
Plant Profile Naphtha hydro-treator unit, Plat former-CCR Unit. Removes unwanted impurities like sulfur, Nitrogen, Oxygen, Metals from naphtha feed stocks (straight run & cracked naphtha) which is comes from CDU / FCC / COKER areas, using Akzo noble catalyst.(KF-841)The hydro-treated Naphtha use as feed stock for Platformer (Reformer) unit. The process licensor is UOP, USA.The plant capacity is 57000 BPSD of processing feed naphtha.The specification of sulfur & nitrogen after hydro treating is 0.5 wt-ppm. From 1630 wt-ppm in feed.Platfomer convert naphthalene into aromatics using R-134 catalyst (UOP) having Continuous Catalytic Regeneration Unit design by UOP named as Cyclemax CCR with capacity of 2250 kg/hr.Recovery plus for maximize LPG recovery from net-gas.Major equipments of unit are, Naphtha Splitter. Feed Surge Drum. Multi-stage centrifugal pump.Combined feed exchanger. (Packinox as well as Shell & tube in Series). Fin-fan and Trim condensers. Charge Heater (Forced draft Combination type Fired Heater). Reactor (Radial Flow). Make-up & Recycle gas Compressor.(Reciprocating type). Product Separator. Stripper Column. 3-Stack Radial flow reactor.Recon tact between Liquid and Gas system to maximize recovery. Net gas & Recycle gas compressors. Cyclemax CCR having Spent catalyst drum, N2 seal drum, Regen-tower, Lock hopper, Reduction section, Catalyst Lifting system.

Job Profile Working as a Panel/field operator in Naphtha hydro treater & Plat former-CCR unit. Responsibilities & Role as a Panel / field operator are,
* Checking of rotating & Static equipments like Pumps, Compressor, Blower, Fin-fans, Fired heater combustion air fans, Filters, Moving & Fixed beds axial/redial flow reactors, Product separator, Combined feed heat exchanger (Packinox), Shell & tube heat exchanger, fin fans condensers, Trim coolers, Distillation columns, Fired heater like (Balanced / Forced draft with BMS), Flare drums, Flush drums, Steam driven turbine, Sophisticated control valves, PSV, MOV, RTSV made by nales, Chloride treator.
* Takes Panel/field equipments reading as per standard Log-sheet.
* Monitoring temp., press., level & flow-rate of equipments.
* Loading/Unloading of rotating drives like pumps & compressor up to it's safe limit.
* Collecting samples of feed, intermediates, products as per schedule.
* Handover/takeover equipments for maintenance.
* Isolation of equipments by closing valves and Blinding for positive isolation.
* Signing Safety work permits including risk assessment which are given by field engineer for maintenance on equipments.
* An experience of Planned & Emergency Shut-down/Start-up.
* An experience of an emergency shut-down like total/partial power failure & Earthquake.
* Responsible for quick response during minor/major hydrocarbon leakage and Fire-fighting in working area.
* Communication and co-ordination with control room, auxiliary fire squad during fire.
* Responsible working with all Personnel Protection Equipments like helmet, Safety shoes, Safety goggles, Hand gloves and special equipment like Birthing apparatus set, chemical protection apron.
* An experience of working accordingly HSEMS.
* An experience of working on DCS (Foxboro) & PLC (Simens).
* Working accordingly SOP during normal and emergency operation.

Name of company
Torrent Gujarat Tech. Ltd. Located at Vadodara-gujarat-India.
Job Duration Oct. 1994 to Nov. 1998.

Company Profile
The company basically purified used or raw solvents for re-use by distillation methods.
Job Profile Worked as a Technical assistance in Solvent Recovery Plant. Responsibilities & Role as a Tech. Assistance are
* Responsible for Field as well as DCS Panel operation.
* An experience of Steam, azeotropic, vacuum and flash distillation operation.* Taking schedule round of plant for observation of any kind of abnormalities like excessive sound/vibration of electric motors, pumps, High / low level in Storage tanks and column.
* Collection of samples as per schedule.
* Filling Log-sheet for field reading.
* Checking healthiness of stand-by equipments for schedule change-over.
* Hazardous chemicals (Butanol, Butyl acetate, Acetone, Iso-propyl alcohol) handling experience by wearing PPE.
* As a panel operator responsible for monitoring plant parameter like Temperature, Pressure, Flow-rate, Level etc. from DCS panel for smooth and desired products quality.
* Isolation of pumps, heat exchanger for maintenance and taken back after maintenance by using safety work permit system.
* Emergency / Planned shut-down for any kind of leakage and fire as well as annual maintenance jobs.
* Working accordingly HSEMS which is adopted by standard company.
* Responsible for quick response during hydrocarbon leakage and fire also, worked as a fire fighter in co-ordination with auxiliary fire fighting team.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 2722)

Go to Search Parameters...

Brief Description

Excellent PC knowledge and technical assistant experience

I have worked in management positions for over 15 years in both the construction and manufacturing industries. I have had up to 120 employees under my supervision at any given time. HR, production, purchasing, documentation and inventory all under my supervision. Workflow and quality #1 priority.

Construction / mining / environmental

Diploma in Chemical engineering. Now working in leading Engineering Institute of India as a Sr. Tecnical Assistant.

8 yrs of exp as mechanical engineer

To work with the state-of-the-art machines with utmost aims of achieving result and proactive in competing with the challenges in oil and gas sector.

Electrical & Instrument Engineer (2006-Now), MIGAS Certified Welding Inspector (2007), Process Quality/Internal ISO Auditor (2004-2007), Product Failure Analysis (2004-2007), Electrical & Instrument Design Engineer (2002-2004), Lecturer Assistant/Junior Lecturer (2000-2002)

Rotational Equipment, Power Infrastructure E&I, O&M, & International ISO Quality and Safety Systems

I have implemented and maintained 7 ISO 9000:2000 Quality Management Systems for several leading companies.

Certified civil engineer with a strong background in oil & gas, industrial, building projects

I am an experienced Wireline Supervisor with cased/open hole experience.

I am an Environmental and Chemical Engineer, working in an oil and gas sector as an EIA specialist at Kuwait

I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

Over 14 yr experience in Instrumentation/Control/Electrical of Oil&GAS OFFSHORE & ONSHORE.

HSE Manager, Advisor for International Oil/Gas Company, Led Assets to top quartile performance. Graduate engineer and Certified Safety Professional

Providing technical review and recommendation for peers. Knowledge in Project Managemant, HYSYS. Training in ISO 9001:2000, OHSAS, ISO 14001:2004

If you are looking for a dedicated, hardworking, honest, dependable employee who can think “Out Side the Box”, see further into the future than the end of his nose and is a dedicated team player - your search may be over.

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm

Experieced in reliability improvement by implement RCA, RCM and Condition Monitoring technologies. Certified as Vibration Analyst Category III.

I have had experience in most forms of drilling, workovers and stimulation. I have limited coil tubing experience, but have a good working knowledge. I am used to working overeseas with people whose first language is not english.

Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.

HR, Payroll, Operations

Extensive experience in supervision and inspection of structural and architectural works for high rise buildings, residential, commercial, industrial, roads and bridges and large infrastructure with an over all responsibility for successful and timely project delivery

Water treatment chemist

Professional Qualification: Bachelor of Engineering (Mechanical); Gulbarga University, Gulbarga. Year of passing Oct. 2000 With the aggregate of 78%, First Class with Distinction. Worked as Junior Erection Engineer for Power Engineers Under 2x25mw Wadi Power Plant

Experienced Senior Technician in Marine/Railway/Mechanical Engineering to obtain a greater opportunity in a challenging and professional environment in which be able to perfect my skills and to learn new things in order to reach the top of my profession and for company's benefits and productivity.

I am Diploma Engineer with total 6+ Years of experience in various engineering field, particularly 5+ years of experience in piping/pipeline Design Engineering for Onshore projects. Presently working as a Pipeline Designer for M/s. Worley Parson Engineering LLC., Oman

A position where I can use and enhance my Linux/Unix, POS, PKI, Smartcards and network security skills in a company where I can contribute with many years of hands-on experience

Computer software as: Office - AutoCAD- mechanical desktop - working model + fluent in speaking, reading, writing English & Turkish + Farsi is my native language+ Azeri is my mother tongue

I am a Chemical Engineer with Masters in petrochemicals and polymers. Problem analysing and solving capabilities supported by strong technical background and enhanced by effective communication skills are my major competencies.

Diploma in Chemical Engineering and 11 yrs. of experience of refinery and petrochemical plant operation as a field/panel operator.

I HAVE ALOT OF EXPERIENCE IN THE ENVIRONMENTAL INDUSTRY

Extensive experience in Civil Engineering CAD Designer/Drafter field, in positions requiring supervisory, administrative, analytical and IT skills

Long term experienced : wanted , Painting Inspector , Paint Superintendent or Technical Sales

I have been trained and have experience integrating the spectrum of the logistics processes within the operational, acquisition, and wholesale environments. The major logistics processes include distribution, materiel management and contingency operations. Duties included directing and managing dis

Design and Construction, Engineering, Calculations, Quality control, Installation and Start Up of new Equipment, Electrical and Electronics Repair and Maintenance

Over 20 Years Experience Process Operator,Commissioning and Start Up Heavy Oil ,Oil and Gas Production

Trucking experience 20 plus years, good on tools, excellent mechanical understanding

15-years of experience as Document Controller for vendor & design documentation in gas and oil industry.

Experienced electrical sales, buyer, customer service,contract negotiations,job bidder

I am Aldrin Entac, male, single and 26 years old. My Present work Exposed me in Construction Site, working on ELV system Company as a Site supervisor for BMS (Building Management System) Structured cabling System,Security System, Audio Video System, Broadcasting System, GSM System, TETRA System etc

Excellent team working skills, Excellent negotiation skills, capable of working under pressure and meeting deadlines, high quality customer service skills, and high quality communications skills

Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.

Health safety and environment officer

Geothecnic, environmental, hydrogeologic, operation

Experienced Administration analyst with areas of expertise in Strategic management, Finance, Logistics and supply chain, Contracts Administration, Business Administration along with latest british MBM degree in Business Management

Experienced and innovative operation & maintenance engineer with technical leadership in commissioning & operation and maintenance activities, quality achievement, reliability, efficiency, customer service and cost reduction goals. High level of management skills with outstanding leadership and

I am part of the team Responsible for the routine, preventive & Predictive Maintenance of all the Static & Rotary equipments of LPG, NGL, Dehydration unit & Sulphur Recovery Unit.

Site Manager, Supervisor, Commissioning, Start up, Troubleshoot,

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out