Resume - Field Engineer

Misco Jobs

Resume #16912

CONTACT INFORMATION:
View contact information...

EXPERIENCE
1. Job Training at PERATMINA CEPU.
East Java, Indonesia, August 1997
Topic: Study Oilfield, Drilling process, and Production equipment and facilities.

2. Practical Work At ARCO INDONESIA (ONWJ).
Jakarta, August 3rd 1998 until October 2nd 1998
Topic: Evaluation of Workover Job in LB-9 Well on Ardjuna Field, ARCO Indonesia.

3. Practical Work At ARCO INDONESIA (ONWJ), For Final Assigment.
Jakarta, June 1st 1999 until july 31st 1999.
Topic: Analisa Pengaruh Produksi Gas terhadap Laju Penurunan Dasar Anjungan (Subsidence) di Lapangan KL ARCO INDONESIA.

4. Chemical Laboratory in TRISAKTI UNIVERSITY.
Jakarta, September 2000 until January 2001.
As an Assistant on Chemical Laboratory.

5. YPF MAXUS,
Jakarta, February 2001 until March 2001.
As Data Entry for BAWORISA Project in Drilling Department.

6. IMPACT Engineering Solution.
Jakarta, April 2001 until March 2003.
As Junior Technical Engineer.

Job Description:
Preparation of work summary, Operation procedure, technical/commercial proposal, writing of technical manuals, bid and document preparation/evaluation, invoicingfor client work, researching and gathering of information associated with operations personnel training work on company in-house project and at customer location.

As Safety Officer

Job Description:
Maintains the record associated with Safety Management System, conduct regular safety inspection, Conducting assessment requirements in areas such hazardous chemical, first aid, fire safety, PPE requirements, lifting operation, manual handling assessment, ect. And prepare and delivery safety briefings.

From November 2001 until March 2003
As project Technician on Underbalanced Drilling Project in Exxonmobil (ARUN BIGBORE UBD PROJECT 2002).Prepares the pre engineering plans (HAZOP 1, HAZOP 2, and Risk Assessment for Project). Arrange and assist the UBD Operation
(Control daily cost, change and update the Procedure/safety plan, follow up the ubd issue)

7. Halliburton Indonesia
Jakarta, April 2003 until Now
As Associated technical professional for TTTCP (Tool, Testing, and TCP) in UBA division.
Continue to provide service for ExxonMobil. Some times going to field to assist UBD operation. And the project was finished at September 2003, total of well drilled was 8 wells. Prepare the End of ExxonMobil UBD project report in ARUN BIG BORE UBD PROJECT 2002-2003.
Cross training in Fiber Optic Job in Caltex as engineer.
UBD project for AMERADA HESS Thailand on 2004, for 2 wells.

EDUCATION
Petroleum Engineer - Trisakty University

Training
Basic Fire Fighting
Basic First AID

Training or Safety Training Certificated

Fire And Safety Training
Radiation General Awareness
Sap Module Of Cpi
Cpi Overview
Done Right Index & Performance Indicators
Sap Module Of Cpi
Explosives General Awareness - Non Users
Service Tools Ii
Tubing-Conveyed Perforating (Tcp) Ii
Separator Instrumentation
Surface Well Testing
Tubing-Conveyed Perforating (Tcp) I
Tcp Gun Loading
Wem/Perfpro
Well Test Analysis For Engineers, Basic
Tttcp Rto Insite
Lithium Battery Safe Handling
Basic Firefighting
Blood Borne Pathogens
Pipe Stop And V-Door Hazard Recognition
General Hydraulics For Downhole Tools
Introduction To Tttcp For New Engineers
Losives User Safety

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 2685)

Go to Search Parameters...

Brief Description

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

PP with 9 years industry experience in Niger Delta, GOM and North Sea provinces. Both studies and operations oriented in core PP skills ranging from quick look/detailed and field reviews. Input to well proposals, workovers and FDP’s. Worked with Shell, Halliburton, BP and Baker Hughes

I am seeking a position that maximizes the education and experiences that I have attained during my time at USMMA and working for Tidewater. The leadership, seamanship and engineering, dynamic positioning, human relations, and adaptation skills that I have developed, make me an ideal candidate.

Seeking full time employment with an oil company who needs a Loader Operator.

Safety Engineering professional with Oil and Gas Exploration and Production background, seeking a position as HSE Engineer in Offshore O&G Industry.

Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience

Scolecodontologis specialist

I am a loyal, hard working team player and enjoy exceeding targets. I continually persevere to achieve the best possible results in what I do and am motivated by achieving and being successful. OOW Deck II/1 (CoC)

Well test supervisor

Well testing technician

Working in the oil&gas industry since last 15 years(11y ears in abroad) working as a Sr. Commissioning operator.

I am engineering graduate in Mechanical from Shadan College Of Engineering, JNTU, India having around 7 years of experience in the field of Electronics/Mechanical related with Projects/Maintenance. I joined Saudi Perfume and Cosmetics Industry-Jeddah, one of the largest manufacturer of perfume.

Instrument Supervisor

Over 20 yrs of exp in upstream O&G. 7yrs offshore, from construction of offshore platforms, hook up and commissioning through to start up and steady state production. Strong HSE focus (previous role in charge of offshore platform), strong hardware completion and handover exp. LNG experience.

I WISH TO APLLY FOR THE POST of a Field Engineer. Every other Information about me are contained In my cv below

Present Assignment: Specialist – MTBE Operations Department MTBE Malaysia Sdn. Bhd.(From April 2001 – Till date) (a wholly owned subsidiary of Petronas Malaysia)

I have worked on oil and gas rigs for 8yrs. I have worked floorhand, motorman, Derreks, asst driller. I know how to work on motors and diesel motors. I know how to weld.

Oil and gas exploration consultant with twenty years worldwide experience seeks project, contract, or position

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Environ and social impact expert, sustainable development project planner, monitoring and evaluation, stakeholders mgt, computer literate, B.Ag econs, M.sc, Ph.D (Rural sociology)

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

I can work floors, motors, and derricks.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

All qualifiations are posted on my resume exept that i have a passport.

Enthusiastic, results-oriented geologist with experience in mineral/oil & gas leasing programs

Service, Manufacturing, & Equipment Manager (General Mgr / Operations Mgr)

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Retail supermarket management operations: employee relations, customer service, safety, inventory levels/ordering, profit/loss, legal requirements, building maintenance

Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.

Measurement & logging while drilling operations with steerable tools; Drilling services ƒæ Logging while drilling with resistivity tool in deepwater operations ƒæ Logging while drilling with Neutron and Density tool, use of Radioactive sources ƒæ

Field Engineer - UBD

: 8 yers experience in pre-commissioning & commissioning and normal operation of refinery and petrochemical operation

Engineer with land and offshore oil and gas experience. Diverse knowledge of safety, drilling rigs, drilling equipment, casing, down hole expertise, completion, workovers, coil tubing, production, operations and cost control.

Pipeline Commissioning, Maintenance & Decomissioning Engineer

Seven years experience in the oil and gas industry as drilling fluid engineer and Drill Bits field engineer

I have workedin the oilfield for about five years.I started out on a workover rig, then i have worked in wireline for four years.

Power Plant Chemist : An extremely talented Power Plant chemist with huge background in operating and maintaining Water Treatment plant. boiler water treatment , Cooling water treatment , steam and water analysis, lube & fuel oil analysis , coal analysis , Effluent Treatments.

Logistic, Oversize Goods Handling, Shipping, And Indonesia Customs

Workover and well services superintendent

Project, Project manager, maintenance, maintenance manager, production, production manager, mining, heavy equipment

Controls Engineer, ControlLogix, Manufacturing Engineer, Engineering Manager, PLC Programming, Robotics, Machine Vision

Mariner (Oil) with over 10 years of high quality shipping experience, now available and armed with Australian MBA, Six Sigma Green Belt, ISO 9001 Lead Auditor Certification, plus all other valid STCW'95; courses.

I earned B.Sc in Petroleum Engineering from The University of Engineering & Technology, Lahore and working as Drilling Engineer / Night Drilling supervisor / directional driller from the last 08 years.

• A Competent mechanical technician skilled in all aspects of plant repair, maintenance as well as installation. Takes pride in working to the highest standards while meeting allotted deadlines and willing to work after hours to ensure job completion. I have an excellent attitude towards the safety

Mechanical foreman and non-destructiv testing inspector

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out