Resume - I am a power plant proffessional having more than 16 years operation experience ...

Misco Jobs

Resume #18249

CONTACT INFORMATION:
View contact information...

OBJECTIVE
A mid-level position (Dy. Manager) in the field of power plant / utility services, where my techno-commercial skills will be used and developed.

PROFILE
Power Engineer with commissioning, and operation experience of India's largest CPP of 360 MW / 1500 TPH (110 bar, 515 deg centi) at Jamnagar, in addition to operation experience of 480 MW coal/ natural gas based IPP at AEC, Ahmedabad. Handling the Steam system, which comprises of 12 turbines (GTs-BHEL, NP and STGs - BORSIG), 8 HRSGs (BHEL, TBW & DBPS) with supplementary firing system of COEN BHARAT and R & V, 4 Auxiliary boilers (TBW). Control and protection of all boilers through state of art FOXBORO DCS, TRICONIX ESD system and PLC based BMS. Exposure to turbine controls Mark-V (GT) and Turbo log (STGs). Ability to work as a part of a team to achieve tight deadlines. Part of team, which has achieved target of commissioning 12 Turbines, Boilers and Balance of plants in one and half years of time.

PROFESSIONAL EDUCATION
1. 1994 B.E. Mechanical Engineering graduate from L.D. college of Engineering Ahmedabad, with first class.
2. 1987 Diploma in Mechanical Engineer from State diploma college, Morbi, with first class and distinction
3. 1990 BOE from Govt. of Gujarat.

WORK EXPERIENCE (16.5 years)
- Six and half years work experience in Reliance Petroleum limited, Jamnagar as Deputy Manager - Power Plant. I have been working in this plant right from the project phase. I worked in this project in various stages of pre-commissioning, commissioning, and finally operation.
(Chronologically in reverse order - Most recent first)
- Major overhauling / HGP planning and implementation for Gas turbines, boilers, and other critical equipments as a Shift In charge.
- Representation of Boilers problems / improvements in plant wise review meeting.
- Preparation of boilers for annual IBR inspection / Liasoning with Boiler inspector and Pollution control board.
- During commissioning time I was an In charge for Aux. boilers and HRSG and lead person while alkali boil out, steam blowing and other misc.commissioning activity of boilers.
- Well aware of our HSE policy, different kind of audits (Both internal and external) and various permit procedures like CWP, HWP, VEP etc.
- Carried out FMEA study, reviewed alarms and protection (as a part of IPF study) for RPL CPP HRSG system as a part of KRA project.
- Prepared and reviewed SOPs, SOCs for CPP HRSG, GT's and Aux. Boilers system as a part of ISO -9000-2000 and ISO - 14001 implementation job.
- At time of commissioning period I was remain involved in steam blowing of plant equipment lines, plant headers as well refinery steam supply headers (HP,MP & LP steam) via silent steam blowing.
- Power plant operation both in islanded and synchronized (with Grid) condition.
- Refinery complex Steam - Water management.
- I am looking after utility operation also as per our job rotation.
- Commissioning of Refinery Steam system, which include boiler erection, hydro testing, alkali boil out, steam blowing, safety floating of boilers and refinery steam headers.
- Commissioning of Gas Turbines (BHEL and NP), steam turbine (GHH-BORSIG), Feed pumps and Dearators.
- Involved in TBW make boiler's FAT at FOXBORO, Chennai.

- Ten years work experience in Ahmedabad Electricity Co. Ltd, Ahmedabad, as Junior Engineer / Section engineer in Power Plant. I was looking after operation of boilers and steam turbines.

- Major overhauling planning and implementation, for boilers and steam turbines and aux. equipments.
- Commissioning and operation of ABB-ABL make 270 TPH / 63 ksc / 500 deg. centi. Boiler with YOKOGAWA -BLUE STAR DCS.
- Commissioning and operation of BHEL make 375 TPH / 140 ksc /515 deg. Centi and having reheat boiler. Pulverized fuel fired boiler and 110 MW steam turbine having MOD 3000 series instruments.
- During both commissioning activity I was operation engineer and looking after making punch list and liquidation of same, equipment/instruments as per P& ID¡¦s, SAMA and logic diagram, PRDS, feed water and it's dozing with dearator system and interlock checking and misc. commissioning activity.
- Commissioning of fly ash handling system (Endure make) in dry and wet form.

I was deputed in ONGC - HAZIRA as Proficiency Engineer for a brief period of two years having
- Two DUEL Pressure HRSGs having supplementary firing facility and one NG / NGL fired duel pressure boiler KTI JAPAN make from YOKOGAWA-CENTUM DCS

SKILL SET
1. Co-generation cum Combined cycle Power plant Operation.
2. Learning - I have been exposed to the state of art technology being introduced first time in India, which requires high degree of fast learning skills.
3. Organizing - I am responsible for the Refinery and Petrochemical plant steam demand management, which involves co-ordination with 20 process plants in the Jamnagar complex.
4. Analytical reasoning -I performed various tests as part of the Reliability team and decided best operating conditions for the reliable operation of the plant.
5. Trouble-shooting - Solved problems encountered during commissioning and operation stages.
6. Can work under pressure - to cope up with the tight commissioning schedule I cultivated myself as a self-motivated energetic performer. I have worked in a 70 hour a week schedule.
7. Trainer - Imparted training to new joinees in both supervisory (GETs) and non-supervisory staff (DETs)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 2479)

Go to Search Parameters...

Brief Description

2 years work experience totally, one year as trainee and one year as a drilling and completion planning engineer for drilling department of National Iranian Oil Company (NIOC).

Chemical Engineer with 30 month of Process Plant Exp.

Planning, Scheduling and Cost Control Engineer

I am a power plant proffessional having more than 16 years operation experience in various field of plant like errection, commissioning, steam blowing, alkali boilout and chemical cleaning of boiler and lines, trouble shooting in Boiler/steam turbine/gas turbine and other power plant auxiliary.

I have had extensive oilfield experience on land, as you will be able to see from my resume. I have great communication skills, a good positive attitude, and am definitely a self starter. I am an excellent team player and work well with others.

Current duties include loading and offloading drill pipe as well as equipment lifts for third party companies, scrubbing and cleaning decks, painting, and also provide any maintenance work on cranes, as needed.

Supervises or receives, stores, accounts for and cares for, dispenses, issues, and ships bulk or packaged petroleum, oils, and lubricants (POL) products.

Hold a valid Class 3 Singapore Driving licence, Hold a valid STCW 95 VI/1 Basic Safety Training for Fire Prevention and Fire Fighting, Fluent in written and spoken English, Proficient in Microsoft Office

Control & Instrument Commissioning / Maintenance Engineer 01.10.2006

A higly qualified technocrat having more than 33 years of experiance inoperations, projects, and marketing.

Shipyard Coatings Program Manager

I have done diploma in chemical enngg i have 5 yrs of experience in PETROCHEMICAL PLANT(nAPHTHA CRACKER) AND PETROLEUM REFINERY

Mechanical Engineer with 2 year experience in the Gas industry in Operation and Maintenance Department.

At present I am working with Punj Lloyd in Procurement Division as a Engineer. I am a Mechanical Engineer from Thapar Institute of Engineering & Technology, Patiala, India. “Batch of 2003”

I have worked during 9 years in the pumping services doing almost all the time cementing.

I have worked offshore for 4 years now. I have got oth emergency and fire response team member and team leader certificates. I have helideck emergency response member. I have a valid offshore survival and my crane op stages 1 & 2 from sparrows.

Bachelor of engineering in mechanical engineering and have more than 18 year experience in mechanical maintenance & projects, condition mointoring in cement plant and steel plant

Over 22 years experience with sour oil & gas processing, acid gas injection, and heavy oil production facilities, on and off-shore. Over twelve years managing various technical support, trades and operations staff. Over nine years of overseas/foreign experience.

Ambitious Petroleum Engineer Looking forward joining a well reputable Global Company, and get the chance to be one of the team workers, as per my attached resume showing my qualification and studies.

Boiler operator& maintenance engineer (HRSG)

B.Tech (Chemical Engg.) from India's one of the premier institue , MBA(Operations Mgmt) from IGNOU . Wide and rich experience in Precommissioning, Commissioning, DCS operation, Field jobs supervision, Safety work permit system , Process Design review, P&ID , PFD , Mass and Energy balance , HAzop.

I am very interested in becoming a member of a fast paced team of geoscientists. For the past two years I have been making a name for myself within the oil industry as a wellsite geologist.

I had 8 year of experience in Oilfield Operation (Maintenance&Production) in Venezuela, and different relation with other operator.

Hands on MAINTENANCE MANAGER with experience in domestic and international plant and field operations. Excellent mechanical skills, understanding of technology, and knowledge of field and plant operations. An organizational driver skilled at overseeing projects from blueprint to implementation.

8 Years Experience Offshore Drilling/Workover/Completions. Responsibilities included Logistics/Administration/Materials Management/Database Management.

I am a geophysicist with over 5 yrs experience in the oil and Gas industry with experiences in Seismic Processing contractor QC, 4D Seismic analysis, Basin Sweep Prospect analysis

Free! EXPERIENCED AND QUALIFIED WELL ENGINEER

Familiar with Set/Retrieve Down Hole Safety Valves, Static Gradient Survey, Flow control equipment(Baker/Otis SSD), AVA (BPI,BPC,BCP,BIP), Support perforating using MRA with 2 7/8 HSD, and Otis/Baker pulling tools & plugs.

I have more than 10 years of experience in logistics and 5 years in coal mining.

Crane Opeator Having valid SAUDI ARAMCO AND GCC LICENSE

A petroleum engineer with over 9 years experience in surface and subsurface offshore and onshore operations of big oil and gas installation in different capacities.

25 Years experience in Refinery Process, Boiler Plant Operations and Boiler Inspections

Legal and Commercial Consultant specialising in Project and Contract Management. Specialist in O&G, Environmental, Engineering and Utilities

Expert in Expediting, Planning and Project managent activities for Oil and Gas projects

My Resume attached below outlines my career accomplishments very well. I have built a sucessfull career based on excellent service, leadership and hard work. I would be glad to discuss my qualifiactions further in an interveiw. Hope to here from you soon, Ryan

27 years in manufacturing indusrty from panel operator to operations supervisor. Currently employed as a startup and commissioning consultant.

More then 20 years in the hydrocarbon industry working on Offshore platforms, FPSO’s & Onshore gas & oil installations. Strengths within commissioning start ups, operations, team building, Team development and a high level of safety awareness.

1.LPG Production, Natural gas Processing, LPG Merox, LPG Sweetening, LPG Finishing. 2. Field operation & Maintenance, trouble shooting, Refinery Operation, Gas Processing plant, GTL plant, LNG spiking, LPGMethane, Ethane, Propane, C1,C2, SBP,LPG Tank farm operation

LPG Production, Natural gas Processing, LPG Merox, LPG Sweetening, LPG Finishing. Field operation, & Maintenance, trouble shooting, Refinery Operation, Gas Processing plant, GTL plant Methane, Ethane, Propane, C1,C2, Special boiling solvent(C7+), pentane iC5)

Construction/Mechanical Project Manager and Engineer with over 15 years of experience including recent projects in the construction industry.

Chemical plant operator.

Receiving an Industrial Engineer Degree in August. Speak three fluent languages with complete management of reading, comprehension, speech and writing in English, Spanish and Portuguese. Hold a British, Brazilian and Colombian passport which allows employment in a vast number of countries.

Experienced Chemical Engineer skilled in process and production engineering

Responsible for two Natural Gas traders, and one Natural Gas/Basis trader, entering and distributing Profit and Loss reports beginning of day and at close of market

Process Engineer with specialisation in oil and gas upstream design.

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

Automation & control specialist with vast oil & gas industry experience in DCS, PLC and Safety shutdown systems.

Data Management position in a growth-oriented

Professional contract negotiator & administrator

Work over supervisor, fishing specialist, slick line coordinator, well testing coordinator, wells technician

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out