Resume - I have been in the electrical utility business for over 20 years,and have experi...

Misco Jobs

Resume #21878

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Actively seeking a position in an area that will provide opportunities for me to contribute my knowledge, creative insights and leadership ability.

EXPERIENCE
March 15, 2003 - Present
Lead E & I Tech/ Maintenance Supervisor
June 2001- March 15, 2003 General Electric Minooka, IL

Electrician/Instrumentation Technician
I started at this combined cycle plant while it was under construction and was involved with all 4 start-ups. The site is owned by NRG/XCEL Energy. I am currently a Control/Instrumentation/Electrical Tech. I interface with operating much of the time as I have gas turbine operating experience. This site has 4 GE. Frame 7FA Gas units, Evap coolers, steam augmentation, Mark 5 GE controls, Foxboro DCS. I have taken all GE courses in association with the Frame 7's, including the (LCI) Load Commutated Inverter and the EX-2000.

1999-May 2001 Midwest Generation Aurora, IL
Fast Start Peaker Technician
* Midwest Generation purchased Commonwealth Edison Fossil Division and Peaker sites in December of 1999. At that time I transferred to the Fast Start Peaking Unit in Aurora, Illinois.
* In this self directed position I am responsible for 12 units GE 5 L & M units @ 18 MW each. These units were natural gas or oil. At this site and the other frame sites I operated all gas turbines and did maintenance on them. I did combustion inspections, can change outs, worked on igniters, flame detectors, cross-fire tubes etc. The sites I was associated with had Westinghouse WDPF and Westinghouse Ovation Controls.
* Maintain a clearance log and use an out of service procedure.

1984-1999 ComEd, Collins Generating Station Morris,IL
Power Plant Electrician 'A'
* Station comprised of 5 steam turbines (gas/oil fuel) of 550 MW each.
* Maintain and repair uninteruptible power systems (UPS), ACS systems, and DC systems, batteries circuits, etc. Have experience on 24KV, 12 KV, 6.9KV and 3-phase systems, including 480 volt. Have knowledge of testing and maintaining motors (AC and DC) and control circuits as well as power circuits. Have had experience in P/M in distribution systems outages, maintenance, etc. In this position I had ownership of switchhgear which was General Electric Magna-Blast 6.9 breakers and G.E. 480 volt AK type draw out breakers and associated equipment.
* Inspect, maintain, dismantle, repair, alter, and reassemble such electrical equipment as motors, circuit breakers, control equipment, relays, signal, assemblies, trolleys, switches, rectifiers, and refrigeration equipment, involving laying out of the work and using power tools and precision gauges.
* Test and clear faults on electrical circuits, reading and working from circuit diagrams.
* Instruct, train and coordinate the work of other electricians.

1983-1984 ComEd, Collins Generating Station Morris, IL
Power Plant Electrician 'B'
* Performed the less difficult work in the repair and maintenance of electrical equipment.
* Made routine inspections of electrical equipment.
Education
* 50 credits completed in general and business courses
* Joliet Junior College
Activities
* United Way Crusade of Mercy Volunteer, Minooka Lions Club.
Special Training/Technical Skills

* Foxboro Training (DCS)
* ABB SF6 Circuit Breakers
* Ex - 2000 Training (Excitation)
* LCI Training
* Worked at Dresden Nuclear Power Plant (Com Ed)
* Completed all necessary courses needed for 'A' and 'B' electrical requirements. Taken and received a "Recommended Rating" on the Supervisory Test (SPR).
* PLC Systems/Industrial Controls/Basic Wiring/Basic Trouble Shooting Skills/DC-AC Fundamentals/Introduction to Nuclear Power/ Internet Cabling (Lucent Technologies)

* CPR Certificate, Perfect Safety Record

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 2494)

Go to Search Parameters...

Brief Description

Chemical Engineer with 3 years Experience need a suitable job in Petrochemical/Chemical field

To become employed as a Process Operator

TO SECURE A POSITION IN WHICH MY EXPERIENCE AND SKILLS AS A REFINERY/CHEMICAL PLANT PROCESS TECHNICIAN WILL BE OF VALUE TO YOUR ORGANIZATION.

Ambitious, enthusiastic and career-conscious, I am keen to acquire new skills and form part of a successful team. I would like to travel and apply the skills learnt during my Geophysical Sciences degree. Seeking to embark on a long and successful career in geophysics.

To pursue an excelling career in an organization that provides challenging and responsible opportunities where my analytical and functional skills and abilities will be an asset.

Mainenance Operation Engineer.Experienced/ exposed to the activites like, QA/QC,SMS,ISM,ISO 14001 auditing,Environmental Regul's,ISPS and Insurance survey's.Trained and certified to Work in Dangerous cargo (Crude oil carrier) ships.Various kind of fire fighting system and techniqs are known.

I’m a Geoscientist with over 5 years of experience in the areas of: Seismic Exploration and Operations and Subsurface Geology in the field of Oil and Gas Exploration. I have master’s degree in Geophysics (Seismology) and Bachelor’s degree in Geology.

Drilling & work Over Supervisor, Master degree, 5 years experience in Offshore & Onshore operations

I’ve worked offshore in the South Pars gas reservoir in Iran as a Drilling and Production Engineer on board the Sagadril-2 /SPD-10 & Sagadril-1 /SPD-11

Senior Telecoms Technician, radio, satellite, rigger, cisco, networking, cabling, management, hf, vhf, uhf, microwave, tracking, it skills, wireless

Free! 5 years of experience as Drilling Engineer for Major Operator company in Denmark (North Sea Project) and as Drilling Supervisor for operator company in Turkmenistan.

PETROLEUM ENGINEER WITH 6 YEARS EXPERIENCE IN DRILLING, COMPLETION AND WORKOVER

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

Environmental, permitting, regulatory compliance work. Mining, power plants, and transmission permitting work. Academic background in range science and ecology. Reclamation experience. Operations, corporate, and international experience.

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

Helmsman, Crain operator, Rigger; selects, manipulates and maintains rigging, gear Transfers Ammunition, petroleum & supplies, maintains stores and rigging equipment using hand and power tools.

I have worked offshore and on land rigs as a wireline field engineer delivering logging services to E&P clients in Mexico, Angola, Congo and Morocco showing an impeccable record of performance throughout my career, which has been recognized internally and externally.

M Tech with 10 years exp in Instrumentation& Control field of Fertilisers, Utilities and Power

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Respected sir/madam . I¡¦m a Diploma in Petro chemical technology and I¡¦m looking forward to work in a stimulating and challenging environment that will convert my skills into performance and recognition for my hard work , honesty and sincerity

I'm seeking a long term employment with a company that can offer advancement and a challenging career

I am Mechanical Engineer with first class career record. I have more than 5 years working experience in large power plant operation and maintenance. I have Boiler proficiency certificate issued by state government of India.

12.02-03.03 Pertra 06.02-11.02 SkyBrush 06.01–05.02 RWE-DEA 02.01–05.01 Norsk Hydro 12.99–09.00 Privat work 02.00–08.00 DONG 02.97–11.99 Saga Petroleum 03.95–01.97 Schlumberger norway 02.89–02.95 Schlumberger worldwide

Business Process Reengineering of a Manufacturing Company Using tools such as Supply Chain Management, Lean manufacturing & Computer Simulation Modelling

To find a quality position in Offshore Drilling Job in Asia Pacific. I have skills and knowledge, a good head for heights with physical fitness and awareness of health and safety. With the exellent ability to follow and give instructions and willingness to live and work away from home (Thailand).

Position in process chemistry with opportunity to apply my knowledge and gain experience for future opportunity and career advancement.

Diplomo in mechanical engineering with 7 months exp

By profession I am Mechanical Engineer. Presently working as a HSE ADVISOR with an Australian Organisation BHP BILLITON PETROLEUM PTY LTD at ZAMZAMA GAS PLANT Pakistan. I have done various HSE Courses including NEBOSH Certification from UK.

Operated plant/pipeline for 3 years and was a welder and heavy duty mechanics TA for 2 years. Im in Perth at the moment but can be transfered to anywhere in australia at anytime.

A Master's in Organic chemistry seeking challenging assignments in Lab operations as Quality controller /Quality assurance/Quality Inspector ,preferably in Qatar

Business Analyst for some 15 years in the IT industry

Senior Project Management, Profit and Loss, Project Planning, development and execution. Consultancy in the areas of safety, risk management, and techncal writing and editing. Major contract administration for a multi-national firm in Saudi Arabia on two different assignments.

Proficiency in applied mathematics, thermodynamics, well test analysis, fluid flow, horizontal wells, calculations of well reserves, reserves evaluations, thermal recovery, mechanical designing, drawings, engineering calculations and evaluations

Subsea, materials, administrative, operational, on shore or Off Shore.

Pipeline Integrity Engineer with over 10 years of experience and expertise in pipeline and asset integrity management, pipeline inspection, MFL technology, corrosion diagnostics, pipeline integrity assessments, pipeline integrity program development, and project management.

LWD/MWD Eng. Since Jun 2000, Having Worked on both, offshore & on shore Rig

Reservoir Engineering studies, Driling, Workover, and completion aspects related to depleted reservoir / salt dome storage wells

A position in a results-oriented company that seeks an ambitious and career conscious person. Highly skilled in all types of computer related work. Have all necessary oilfield tickets, BOP, H2S, First Aid, Etc.

Geology MSc graduate looking for experience in the oil industry. Principally looking for roughneck-type work leading on to more rewarding and challenging positions. Am willing to work off-shore as well as on-shore and am willing to relocate anywhere other the globe.

Seeking for an entry level position.

3rd Class Power Engineer

i am working in the field of painting for 9 years mainly in in application and inspection

About Ten years experience with engineering of Oil and Gas project (Process Platform & Well head Platform), Electrical Substation, HV/MV/LV apparatus switchgears/ MCC, MV/ LV Motors, power supply unit, UPS control equipments, Electrical on Mechanical Package (Gas Compressor, Fire Water, Gas Turbine)

Oilfield Supervisor fracturing high pressure

5 years with schlumberger oilfied sevices company as high pressure pump operator

Experienced Professional in Port Operations, Security Operations, Marine Operations, Operations Management, Environmental, Health, and safety, Administration, Logistical, Maintenance, Planning, Scheduling and Human Resource.

Excellent client relationship, leadership and strong management aptitudes in oil service industry.

Petroleum Engineer with 08 years of highly diversified experience in different countries, companies & in Production, Reservoir, Facilities, Stimulation, Completions, and Drilling; major and independent responsibilties.

DIVERSE POWER GENERATION and MAINTENANCE MANAGEMENT PROFESSIONAL

Diploma In Electronics & Communication.Has 11 years of experience in the field of Implementation, Operation & Maintenance of Telecom Voice & Data /Fiber Optic/Copper Networks.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out